| |
VK3XX > WANTED 30.09.04 01:46l 21 Lines 644 Bytes #999 (0) @ WW
BID : 961369VK3XX
Read: GUEST
Subj: <N2JXN> Re: IF232.
Path: DB0FHN<DB0MRW<DB0HOT<OK0PBX<OK0PHK<OK0NAG<OK0PPL<DB0RES<ON0AR<7M3TJZ<
SP7MGD<IZ0AWG<IW8PGT<CX2SA<VK4TRS<VK6HGR<VK3AVE<VK3FRS
Sent: 040929/2336Z @:VK3FRS.#MEL.VIC.AUS.OC #:36116 [Kilsyth] $:961369VK3XX
From: VK3XX@VK3FRS.#MEL.VIC.AUS.OC
To : WANTED@WW
Hi there, N2JXN,
There is a circuit for an equivalent Kenwood interface in the ARRL
Handbook issued around 1998-2000 and may even be in later versions. The
parts should be readily available at say Radio Shack because they are very
common. The circuit uses a MAX232 chip and four opto-isolators. The type
of the latter used are certainly not available here but the common 4N25
will do the job though the pinout is different from those shown.
I hope this helps.
Cheers and
73 - GORDON, VK3XX @ VK3FRS
Message timed: 09:38 AEST on 30 Sep 2004
Message sent using WinPack V6.80 (Registered)
Read previous mail | Read next mail
| |
