OpenBCM V1.13 (Linux)

Packet Radio Mailbox

DB0FHN

[JN59NK Nuernberg]

 Login: GUEST





  
ZL3AI  > APRDIG   03.02.03 14:29l 284 Lines 10739 Bytes #999 (0) @ WW
BID : 786-ZL3AI
Read: GUEST
Subj: TAPR Digest, Jan 25, 2/4
Path: DB0FHN<DB0ZWI<DB0HDF<DB0ERF<DB0FBB<DB0GOS<ON0AR<ON0AR<7M3TJZ<WB0TAX<
      W7NTF<VK3AVE<ZL2BAU<ZL3VML
Sent: 030129/1005Z @:ZL3VML.#80.NZL.OC #:58386 [Chch-NZ] FBB7.00i $:786-ZL3AI
From: ZL3AI@ZL3VML.#80.NZL.OC
To  : APRDIG@WW

Subject: RE: Skywarn Symbol
From: "Phil Pacier, AD6NH" <ad6nh@arrl.net>
Date: Sat, 25 Jan 2003 10:48:21
X-Message-Number: 11

Bob (and the group), I have posted the icon symbol for Skywarn.  I know you 
say one exists, Bob, but I have been unable to find it.

http://www.aprsca.net/aprslogo.html

Thanks! 73

Phillip Pacier - AD6NH
www.aprsca.net

----------------------------------------------------------------------

Subject: New Garmin PDA
From: Gregg Martell <gmartell@pobox.com>
Date: Sat, 25 Jan 2003 12:08:24 -0500
X-Message-Number: 12

This looks like it could be useful for mobile APRS.  To bad it's list price 
is so high

Gregg
KB3GMV

http://www.garmin.com/products/iQue3600/	

----------------------------------------------------------------------

Subject: DIGI_NED floppy V1.1
From: Henk de Groot <henk.de.groot@hetnet.nl>
Date: Sat, 25 Jan 2003 18:43:09 +0100
X-Message-Number: 13

Hello,

I made an update to the boot-floppy distribution of DIGI_NED. At this time 
the software is stored on my own page as this was the most simple to do 
now. Maybe it will move to the main digi_ned site later.

Address: <http://www.homepages.hetnet.nl/~pe1dnn>

This disk is meant to be able to quickly deploy digi's and to give a quick 
start to those that want to get started with DIGI_NED. Its using DIGI_NED 
0.3.3, but does not contain the full distribution! For that download the 
package from the main digi_ned site.

I tested this at home but of course there are more configurations than I 
can make and verify myself. If there are problem's please inform me.

Changes:
- Small change to the generated DIGI_NED configuration file
- Now it is easier to configure an SSID for the digi if you have a non-US 
keyboard
- The TM-D700 and TS-2000 correctly switch to packet mode and are 
reinitialized after a power break. The TM-D700 and TS-2000 must be 
configured to 9600 baud serial line speed to be able to work with this floppy.
- Changed the info file

Good luck, kind regards,

Henk.

Info.txt:
-----------------------------------------------------------------------------
About this software:
--------------------

The enclosed DIGIFLOP.EXE version 1.1 is a self extracting 1.44 Mb disk
image, build with a Freeware program called "DI" which can be found on
the disk after creation. Use a fresh formatted 1.44 Mb floppy for this
(format a: /U)!

After creation of the disk you will have a bootable DISK with a complete
DIGI_NED digipeater. As DOS Caldera DR-DOS 7.03 is used; this version of
DOS is free for non commercial personal use. Read LICENSE.TXT, please
respect Caldera's License. Also read README.TXT on the disk.

After booting the first time a configuration screen appears. You can fill
this in. Navigation is done with TAB and Shift-TAB and function keys. F3
gives help on a field. You can choose 16 different predefined
configurations.

You can also make customized floppies by editing DNCONFIG.INI and making a
matching "RUN.BAT" (in the DIGI_NED directory). You can make your own
disk-image with the included disk image tool.

After configuration the DIGI_NED files are copied to Ramdisk, this is also
done after a reboot. For this to work your PC shall be at least a 286 with
1 Mb memory.

Don't be alarmed if files seem to be copied to "C:", it just means that the
Ramdisk was created as "C:" because your harddisk was not recognized; Caldera
DR-DOS does not understand FAT32 disks. If you have many harddisks and even
use drive "F:" then you should be carefull, the floppy checks from "F:" down
to "C:" to find the ramdisk. If not sure make a backup copy of your
"\Autoexec.bat", "\Config.sys" and "\Command.com" files, that are most likely
the only ones that are overwritten should the software use your harddisk
instead of the ramdisk.

This floppy includes a new "AX25_MAC" driver. It is possible to use a TH-D7,
TM-D700 or TS-2000 as intelligent digipeater. A limitiation is that the
TH-D7 has to understand KISS like the TH-D7E V2.0 does. The US TH-D7's do
not seem to work. As far as I know the TM-D700 and TS-2000 should not give
a problem with KISS. Note that the serial line speed is 9600 baud for
the TH-D7, TM-D700 and TS-2000; otherwise it will not work!

During operation you may notice that the TH-D7/TMD700/TS2000 is
reinitialized. There are 2 possible reasons for this:

- The TNC hangs and does not send any RX data anymore, this is the build-in
   recovery procedure
- There is just no RX data and the internal watchdog runs off, this happens
   when there is low traffic. Initialisation takes about 3 seconds and since
   it is low traffic anyway this is I think acceptable (and there is just
   no other option...).

There is no sofisticated way to know if the TNC hangs so the drives watches
if still data is received after it did a transmission. The away the driver is
now it was possible to run for one day without any TNC hangup (disabled the
watchdog and looked if it kept running). Watchdog time is 30 seconds after
the last transmission.

If you use KISS, then the software will put the TNC in KISS mode. It will try
different methods; first the method for the TheFirmware/WA8DED, then "KISS
ON" followed by "RESTART" and finaly "KISS ON" followed by "RESET". Be sure
not the switch on the TNC on half way during this process as "RESET" will
wipe all information in the TAPR TNC-2. In the normal sequence this is not
a problem since by the time the RESET is reached the TNC is already in KISS
and ignores it.

If you TNC remembers KISS mode and you want to get it out of KISS again,
use:

..\kissinit -PCOM1 -K

(for COM1, for documentation of KISSINIT look in the KISS directory on the
floppy disk)

If you want to run the configurator again, remove DNCONFIG.BAT from the
root directory of the floppy and reboot.

This is as out-of-the-box it gets! Good luck!

Kind regards,

Henk - PE1DNN

----------------------------------------------------------------------

Subject: Internet worm and slow internet overnight
From: Gerry Creager <gerry.creager@tamu.edu>
Date: Sat, 25 Jan 2003 13:27:04 -0600
X-Message-Number: 14

For those interested, a new worm was activated last night.  by 0537Z, 
the worm had crippled our campus and most of the US internet, initially 
creating so much traffic that Domain Name Servers were unable to resolve 
names and often were unavailable.

The exploit is specific for Microsoft SQL Server and functions on the 
SQL Monitoring port 1434 UDP.  If you're updating a firewall, block both 
inbound and outbound.

The worm appears to not carry a malicious payload, but it did bring a 
number of sites and ISPs to their knees.  We were down at Texas A&M for 
well over 8 hours, and some parts of the campus are still broken as a 
result.

Info on the worm can be found at:
http://www.cnn.com/2003/TECH/internet/01/25/internet.attack/index.html

There are now several other stories up but this is probably sufficient 
for known data.

I'll take questions off-list and summarize if there's enough interest.

73, gerry
-- 
Gerry Creager -- gerry.creager@tamu.edu
Network Engineering -- AATLT, Texas A&M University
Office: 979.458.4020  FAX: 979.847.8578
Cell: 979.229.5301    Pager: 979.228.0173

----------------------------------------------------------------------

Subject: Re: Icon for I'net-only station?
From: "Charles H. Rahe, II" <crahe@infi.net>
Date: Sat, 25 Jan 2003 14:28:35 -0500
X-Message-Number: 15

How about using an SSID of -0 for APRS-IS only?

----------------------------------------------------------------------

Subject: RE: Skywarn Symbol
From: James Smith <k9apr@kiva.net>
Date: Sat, 25 Jan 2003 14:50:10 -0500
X-Message-Number: 16

Being in APRS for all these years, I haven't never seen a Skywarn symbol 
in any of the APRS programs available... Thanks Phil for posting one... :-)

----------------------------------------------------------------------

[commercial content deleted]

----------------------------------------------------------------------

Subject: RE: Incident Command Post Symbol
From: "Spider" <spider@rivcom.net>
Date: Sat, 25 Jan 2003 13:07:47 -0700
X-Message-Number: 18

Well there was suppose to be!!  :)

A black border would only be needed if the map background was white....or
green, I suppose.  That's all.

Jim

----- Original Message -----
From: "Robbie" <mwrobertson@attbi.com>
To: "Spider" <spider@rivcom.net>
Cc: "TAPR APRS Special Interest Group" <aprssig@lists.tapr.org>
Sent: Saturday, January 25, 2003 7:34 AM
Subject: Re: [aprssig] RE: Incident Command Post Symbol

>Hi Jim,
>
>Been there a couple times, and running Netscape 7.01, there is no black
>border, "as shown".. Is there a border or not?
>
>Robbie,  wa9inf

----------------------------------------------------------------------

Subject: Re: Icon for I'net-only station?
From: "AE5PL Lists" <HamLists@ametx.com>
Date: Sat, 25 Jan 2003 14:15:20 -0600
X-Message-Number: 19

A callsign with no SSID shown is a station with a SSID of zero. Therefore,
adding this to the data stream would not act as a differentiator.

On the overall subject of an icon for Internet-only stations, my question
would be "Why?".  The APRS-IS is a backbone that interconnects local APRS
networks.  That "local" APRS network may be a station of one. Shouldn't
that station use an icon that reflects what the station is (such as a
house, hotel, etc.), not how it is connected to the APRS world?

An IGate icon shows that a station is functioning as a bidirectional
gateway between RF and APRS-IS.  While nothing mandates the use of specific
icons for specific functions, many have made their way into "standard use".
A station connected to APRS-IS via a direct Internet connection is no
different in function from the same type of station that is broadcasting on
RF.  So if the use of icons is to help people looking at a map get an idea
of station function or location, what unique function or location would be
represented by a special icon for non-RF stations?  IMHO, I think it would
be better to show what/where that station does/is than to worry about how
its packets are getting broadcast.

Finally, regarding "new" icons.  Icons that aren't represented in the
specification that have been discussed need to be added to the spec. This
may be a good thing for the Bob's errata page.  However, if icons are
added, notification of such additions need to be sent to client authors and
what the actual icon is to look like needs to be posted with the addition
on the errata page.  Otherwise, you end up with a hap-hazard implementation
which could cause people to become disenchanted with APRS.

73,

Pete Loveall AE5PL
pete@ae5pl.net

----------------------------------------------------------------------



Read previous mail | Read next mail


 16.11.2026 09:07:19lGo back Go up