OpenBCM V1.13 (Linux)

Packet Radio Mailbox

DB0FHN

[JN59NK Nuernberg]

 Login: GUEST





  
ZL3AI  > APRDIG   03.02.03 14:30l 265 Lines 9727 Bytes #999 (0) @ WW
BID : 797-ZL3AI
Read: GUEST
Subj: TAPR Digest, Jan 27, 2/10
Path: DB0FHN<DB0RGB<OK0PPL<RZ6HXA<SP7MGD<IK6PYS<W4JAX<VK4TUB<ZL2BAU<ZL3VML
Sent: 030131/0917Z @:ZL3VML.#80.NZL.OC #:58514 [Chch-NZ] FBB7.00i $:797-ZL3AI
From: ZL3AI@ZL3VML.#80.NZL.OC
To  : APRDIG@WW

Subject: Re: FT-100 operations.
From: WA8LMF2@aol.com
Date: Mon, 27 Jan 2003 01:46:23 EST
X-Message-Number: 3

In a message dated 1/26/2003 5:42:58 PM Pacific Standard Time, 
bruninga@usna.edu writes:

>I hate to ask a general question to the SIG, but I need to know quickly if
>an FT-100 can be listening to HF and at the same time can be transmitting
>on 2 meters FM.
>  
>Dont know anyone else to ask but the sig.
>Sorry,.

NO!  You can set up any arbitrary split between transmit freq and receive 
freq but it won't receive and transmit at the same time; i.e. run full 
duplex.  It's got only one IF system in it (unlike radios like the FT-847 
"Earth Station" or TS-2000).  

----------------------------------------------------------------------

Subject: RE: Incident Command Post Symbol
From: "Curt Mills, WE7U" <archer@eskimo.com>
Date: Sun, 26 Jan 2003 23:40:28 -0800 (PST)
X-Message-Number: 4

On Sat, 25 Jan 2003, Spider wrote:

>>>>Inever heard if the Incident Command Post Symbol was ever adopted.
>>>What should it look like?
>>
>>A box with ICP in it.
>>
>>
> 
>The correct symbol is posted at www.wa6oft.com/icp.htm

The green/white box has been added to Xastir at the "/c" symbol
position.  Thanks Jim!

Any other symbols we might be missing for emergency operations?

Curt, WE7U.				archer@eskimo.com
http://www.eskimo.com/~archer
  Lotto:  A tax on people who are bad at math. - unknown
Windows:  Microsoft's tax on computer illiterates. - WE7U.
The world DOES revolve around me:  I picked the coordinate system!"

----------------------------------------------------------------------

Subject: RE: Skywarn Symbol
From: "Curt Mills, WE7U" <archer@eskimo.com>
Date: Sun, 26 Jan 2003 23:44:52 -0800 (PST)
X-Message-Number: 5

On Sat, 25 Jan 2003, James Smith wrote:

>Being in APRS for all these years, I haven't never seen a Skywarn symbol
>in any of the APRS programs available... Thanks Phil for posting one... :-)

Has it been assigned a slot in the symbol table, and if so, which
slot?  Without knowing that it's "official" and which slot to put it
in, it won't get added to the slew of APRS programs.

I'd be happy to add it to Xastir if it was "official", whatever that
means these days.  hi hi

I'll run off and check the spec again and the errata page just to
make sure it didn't sneak up on us.

Curt, WE7U.				archer@eskimo.com
http://www.eskimo.com/~archer
  Lotto:  A tax on people who are bad at math. - unknown
Windows:  Microsoft's tax on computer illiterates. - WE7U.
The world DOES revolve around me:  I picked the coordinate system!"

----------------------------------------------------------------------

Subject: Re: Proposals, was something else
From: "Curt Mills, WE7U" <archer@eskimo.com>
Date: Mon, 27 Jan 2003 01:15:38 -0800 (PST)
X-Message-Number: 6

On Sun, 26 Jan 2003, AE5PL Lists wrote:

>>From: Spider [mailto:spider@rivcom.net]
>>
>>BASE:  The Official Symbol for a BASE is a [CIRCLE with a "B"
>>
>>STAGING AREA:  The Official Symbol for a STAGING AREA is a
>>[CIRCLE with an "S" in the middle].  Staging Areas are
>>
>>CAMP: (I know there is already a camp symbol)  The Official
>>Symbol for a CAMP is a [CIRCLE with a "C" in the middle]  A
> 
>You can adopt your standard now.  From the spec:
> 
>ALTERNATE SYMBOL TABLE
>\$ GPS GPS Icon
>  xyz Enn
> 
>\0 A0z  16  Circle [with overlay]
> 
>No new symbols need be created for your examples.

Note that the above is a \zero, not a \Big-Oh.

Just checked on Xastir:  We can generated/display all of these, but
it's certainly less than obvious how to go about generating them from
the dialogs.  I had to look up overlays in the spec to figure it out.
Shows how much I've used overlays in the past I guess...

I'm going to add an item to the Xastir feature request list for a
special "SAR" or "Public Service" mode for icon selection that'll
have things like "Base", "Staging", "Incident Command Post", "Camp"
and others so that both the symbol and overlay are selected for the
user by clicking on one button.

While we're at it, we should probably change the dialogs to lead the
user through setting overlays as well.

Curt, WE7U.				archer@eskimo.com
http://www.eskimo.com/~archer
  Lotto:  A tax on people who are bad at math. - unknown
Windows:  Microsoft's tax on computer illiterates. - WE7U.
The world DOES revolve around me:  I picked the coordinate system!"

----------------------------------------------------------------------

Subject: RE: Incident Command Post Symbol
From: "Curt Mills, WE7U" <archer@eskimo.com>
Date: Mon, 27 Jan 2003 01:24:51 -0800 (PST)
X-Message-Number: 7

On Sun, 26 Jan 2003, Curt Mills, WE7U wrote:

>>The correct symbol is posted at www.wa6oft.com/icp.htm
> 
>The green/white box has been added to Xastir at the "/c" symbol
>position.  Thanks Jim!

After reading further postings, I may have been premature in
implementing this symbol.  It's extremely easy to delete it later
though, so I'll keep it for now.  I'll watch for acceptance on the
aprsspec list and modify the Xastir code accordingly.

Curt, WE7U.				archer@eskimo.com
http://www.eskimo.com/~archer
  Lotto:  A tax on people who are bad at math. - unknown
Windows:  Microsoft's tax on computer illiterates. - WE7U.
The world DOES revolve around me:  I picked the coordinate system!"

----------------------------------------------------------------------

Subject: RE: Incident Command Post Symbol
From: "Spider" <spider@rivcom.net>
Date: Mon, 27 Jan 2003 05:08:30 -0700
X-Message-Number: 8

Thanks Curt,  I posted the symbols for BASE, CAMP and STAGING areas.  Did
you see that post?  There is also Helibases and Helispots.  Although a
CASUALTY COLLECTION POINT (CCP) is not official, it has been written about
and given serious thought and is followed.  A CCP would include areas for
triage and can be quite large....  I = Immediate Treatment, D = Delayed
Treatment, DECEASED (for the morgue), MINOR  = Minor Treatment

As a summary of all this, an Incident Commander will ensure that the ICP
meets the needs of the incident and will:
1.  Name the ICP
2.  Mark it clearly using standard ICS symbol on a map, or with light, sign,
or flag at the site.
3.  Communicate its name and location to both responders and dispatch.

Jim, WA6OFT

----------------------------------------------------------------------

Subject: APRS Look-and-Feel [was: APRS Symbols (versus Windows ICONS)]
From: "Ev Tupis (W2EV)" <w2ev@arrl.net>
Date: Mon, 27 Jan 2003 07:20:21 -0500
X-Message-Number: 9

After the herculean efforts of Ian Wade and the APRS Protocol Specification
committee a couple of years ago in assembling together all of the various
aspects of the on-air protocol, there seems to be some interest to revisit
it all again (even a volunteer, as I remember <smile>).

The original charter of the APRS Specification Working Group literally
omitted attention to look-and-feel issues (focusing instead on the
technical aspects of APRS):

Working Group Charter - Section V.
"... It does not include user interface or other elements that do not
affect the content or format of these interface components."

I wonder though, is it time to change that, in light of a statement in the
Working Group Charter - Section II, Article 6:

     "6. The Group will put a voluntary APRS certification process in place,
     to be managed by Bob Bruninga with Group oversight.  The process will
     include a publicly available validation suite."

Would this be a good time for the Working Group to establish a procedure by
which various "APRS systems and software" *as well as* "user-interface
items" could be tested and _graded_?  The "grade" could be made public for
others to use as a gauge before they chose to use a particular product,
blindly.

Doing so would address several items, including the apparent "stagnation"
of progress on the development front, too.  If I'm an author, getting a
Certification Grade of 72%, I'd think there would be some motivation (or
pressure, at least) to learn what I could do to improve that.

A two-part certification could include a "percentage" grade for passing the
protocol test and a "letter" grade for passing the user-interface test.
72A could mean that 72% of the protocol is implemented and all of that
implementation meets the look-and-feel aspects of that part of the
protocol.

Just a random thought from a regular-Joe non-author.

Kindly,
Ev, W2EV

----------------------------------------------------------------------

Subject: RE: Incident Command Post Symbol
From: "Spider" <spider@rivcom.net>
Date: Mon, 27 Jan 2003 05:36:05 -0700
X-Message-Number: 10

----- Original Message -----
From: "Curt Mills, WE7U" <archer@eskimo.com>
To: "TAPR APRS Special Interest Group" <aprssig@lists.tapr.org>
Sent: Monday, January 27, 2003 2:24 AM
Subject: [aprssig] RE: Incident Command Post Symbol

>On Sun, 26 Jan 2003, Curt Mills, WE7U wrote:
>
>>>The correct symbol is posted at www.wa6oft.com/icp.htm
>>
>>The green/white box has been added to Xastir at the "/c" symbol
>>position.  Thanks Jim!
>
>After reading further postings, I may have been premature in
>implementing this symbol.  It's extremely easy to delete it later
>though, so I'll keep it for now.  I'll watch for acceptance on the
>aprsspec list and modify the Xastir code accordingly.
>
>Curt, WE7U.    archer@eskimo.com

To the best of my knowledge, Roger has also added this to UI-VIEW.  However
he had to make a minor variation to the color white as he treats white as
transparent.  If'n there is any opposition on the aprsspec list to this
symbol, could you or someone there please keep me informed?

Jim, WA6OFT

----------------------------------------------------------------------



Read previous mail | Read next mail


 16.11.2026 08:57:15lGo back Go up