OpenBCM V1.13 (Linux)

Packet Radio Mailbox

DB0FHN

[JN59NK Nuernberg]

 Login: GUEST





  
ZL3AI  > APRDIG   03.02.03 14:29l 298 Lines 10517 Bytes #999 (0) @ WW
BID : 794-ZL3AI
Read: GUEST
Subj: TAPR Digest, Jan 26, 3/4
Path: DB0FHN<DB0ZWI<DB0HST<ON0DXC<WA7V<W7NTF<VK3TE<ZL2BAU<ZL3VML
Sent: 030130/1005Z @:ZL3VML.#80.NZL.OC #:58449 [Chch-NZ] FBB7.00i $:794-ZL3AI
From: ZL3AI@ZL3VML.#80.NZL.OC
To  : APRDIG@WW

Subject: RE: Big Digis - another idea
From: Earl Needham <needhame@yucca.net>
Date: Sun, 26 Jan 2003 13:08:44 -0700
X-Message-Number: 16

At 10:03 PM 1/14/2003 -0500, Bob Bruninga wrote:
>On Tue, 14 Jan 2003, Bill Vodall - WA7NWP wrote:
><snip>
>>2.  Here's a bit of a different twist.  DON'T uses these big digi's as a
>>WIDE or WIDEn-n system.  Run them simply as "RELAY" plus their local
>>call and alias. They will then pick up mobiles out in the boonies and
>>relay their packets to the communities with IGATES and more users.
>>Folks in the areas wanting to propagate packets to adjourning areas can
>>explicitly use the Big Digi's call or alias.
>
>Hey, now that is a new twist and is actually very good!  It supports the
>mobile and in general is not in the path for everyone else that doesnt
>need it...  Good thinking...

         I think it may only "half" support the mobiles.  In the wide open 
spaces, someone with a mobile will never see the other users unless they 
use a path ending in "RELAY"...

         I guess this calls another question -- do mobiles want/need to see 
other stations?  I know my answer is "yes", but perhaps others do not.

         7 3
         Earl

----------------------------------------------------------------------

Subject: JUI?
From: "AE5PL Lists" <HamLists@ametx.com>
Date: Sun, 26 Jan 2003 14:46:03 -0600
X-Message-Number: 17

Does anyone know who JUI is?  There is a UI-View32 V1.84 user logging
into APRS-IS servers with a verified connection which should be reserved
for licensed hams.  Anyone know who this is and if they are a ham?

73,

Pete Loveall AE5PL
pete@ae5pl.net

----------------------------------------------------------------------

[commercial content deleted]

----------------------------------------------------------------------

Subject: Re: JUI?
From: Steve Dimse <k4hg@tapr.org>
Date: Sun, 26 Jan 2003 15:59:13 -0500
X-Message-Number: 19

On 1/26/03 at 2:46 PM HamLists@ametx.com (AE5PL Lists) sent:

>Does anyone know who JUI is?  There is a UI-View32 V1.84 user logging
>into APRS-IS servers with a verified connection which should be reserved
>for licensed hams.  Anyone know who this is and if they are a ham?

The only packets with that call are:

JUI>APU254,TCPIP*,qAC,JUI:>212159zKC9CJJ Home 

He is apparently running the Richmond, IN Echolink. The only data for him is
from -9.

Steve

----------------------------------------------------------------------

Subject: Re: JUI?
From: "AE5PL Lists" <HamLists@ametx.com>
Date: Sun, 26 Jan 2003 15:06:00 -0600
X-Message-Number: 20

Thanks.  My concern stemmed from the connection being a verified
connection from a client but not using a callsign for the login.  I had
done posit lookups on a couple of databases but did not find JUI.

73,

Pete Loveall AE5PL
pete@ae5pl.net

----------------------------------------------------------------------

Subject: problem with d7 digipeater/tnc
From: "Wes Johnston" <wes@johnston.net>
Date: Sun, 26 Jan 2003 16:08:54 -0500
X-Message-Number: 21

Having seriously bashed winaprs a few weeks ago for mangling packets when
it uncompressed and IGATED them, Steve Dimse wrote me and told me that the
likely culprit was a TNC not passing 8 bit characters to the serial port of
the winaprs station.  Since winaprs was doing the translating, I
incorrectly assumed that it was also mangling the packets.  Please accept
my apologies for ranting like a lunatic.

That behind us, I have been talking with kd4htw, the owner of the igate
which appeared to be mangling my posit, and he is using a d7 as a TNC for
his winaprs igate.  He took his IGATE off the air a week ago as an
experiment, and my posit on findu and aprsIS has not been mangled since.

Can anyone tell me (since I don't own a d7) what parms in the TNC control 8
bit ascii characters on the serial port or what all of the TNC parms should
be.

Wes

----------------------------------------------------------------------

Subject: SV: Re: new IGATE on the way! (CQ AA3JY)
From: "Roger Bille" <roger.bille@telia.com>
Date: Sun, 26 Jan 2003 23:18:49 +0100
X-Message-Number: 22

>Steve Dimse wrote:
>Note that with the Q construct, we have a reliable way of
>determining who the
>IGates are, all it takes is software to look at these over time, to give
>reliability figures for each one, and do dynamic mapping of
>online systems. I'm
>not going to have time to do this for a while, but it is
>something that would
>make a nice, well defined project for someone else.

This option exist in the User Definable Filter Ports 14580 that a number of
servers now have. Use the filter command:

	filter q//i

This will only pass position packets from stations that has been identified
through qAr/qAR in packets.

Note, that at each connection the filter server starts from zero and start
listen to all packets. So it first need to identify an Igate through the q
Construct and then the next position packet from that Igate will pass.

For a full list of possible filter commands check here:
http://www.aprs-is.net/javAPRSSrvr/javaprsfilter.htm

73 de sm5nrk/Roger

----------------------------------------------------------------------

Subject: Signals
From: Robbie <mwrobertson@attbi.com>
Date: Sun, 26 Jan 2003 16:39:57 -0600
X-Message-Number: 23

Hi all,

In listening to 144.390 for one reason or another around the Chicagoland 
area, there has been an increasing number of badly adjusted transmitters 
lately. Most of them un-decodable and also seems to come up on other 
signals already started.

One noticable one, comes up to power so slowly and with weak audio, that 
I have yet to get a callsign or I would be courtious enough to contact 
him direct, :-)

So, I am just suggesting we check out our rigs from time to time and get 
our money's worth from the electricty/battery we use up, :-)

Best Regards!

Robbie,  wa9inf

----------------------------------------------------------------------

Subject: Re: Proposals, was something else
From: Bob Bruninga <bruninga@usna.edu>
Date: Sun, 26 Jan 2003 18:20:18 -0500 (EST)
X-Message-Number: 24

On Sun, 26 Jan 2003, Spider wrote:

>>>Who adds them to the Specification?  Bob?
>>
>>After they are proposed, they are presented to all the authors on the
>>SPEC discussion list and if there are no objections, then they are
>>considered adopted..
>>
>>Bob
>
>Thanks for that info, Bob.  But who presents them?  I am not on that
>list, nor should I be. Are you going to take the ICP symbol and propose
>it there, for example?

Yes,  But Im going to wait a while to see if any others surface..
bob

----------------------------------------------------------------------

Subject: Re: APRS Symbols (versus Windows ICONS)..
From: Bob Bruninga <bruninga@usna.edu>
Date: Sun, 26 Jan 2003 18:32:26 -0500 (EST)
X-Message-Number: 25

On Sun, 26 Jan 2003, Spider wrote:

>In APRSdos (never have seen it) how does it handle several stations
>within a few feet of each other?  How do you seperate stations?

Several methods in APRSdos:

1) Zoom in until they separate.  APRSdos can zoom to the 1/32nd mile scale
   on any screen meaning a pixel represents about a foot.

2) OBJECTS and STATIONS use different LABELing conventions.  Station Calls
always show to upper right of Symbol, Object names always show to lower
right of symbol.  Thus if an OBJECT and STATION are at the same location,
you will see both labels, (but ICONS are superimposed).

3) Press > or < keys which cycle through every station on the screen
displaying on the bottom line all the attributes of each station.  So if
you zoom in so that only a few stations are on the sceen, and then cycle
through the < or >keys, any statiosn stacked on top of each other very
quicly become apparent.

4) Move cursor nearby, hit ENTER to select it, move cursor, hit Insert key
to move it over a few feet so you can see if anyone is underneath...

Thats all that come to mind...

----------------------------------------------------------------------

Subject: Re: Proposals, was something else
From: "Spider" <spider@rivcom.net>
Date: Sun, 26 Jan 2003 17:02:16 -0700
X-Message-Number: 26

----- Original Message -----
From: "Bob Bruninga" <bruninga@usna.edu>
To: "Spider" <spider@rivcom.net>
Cc: "TAPR APRS Special Interest Group" <aprssig@lists.tapr.org>
Sent: Sunday, January 26, 2003 4:20 PM
Subject: Re: Proposals, was something else

>On Sun, 26 Jan 2003, Spider wrote:
>
>>>>Who adds them to the Specification?  Bob?
>>>
>>>After they are proposed, they are presented to all the authors on the
>>>SPEC discussion list and if there are no objections, then they are
>>>considered adopted..
>>>
>>>Bob
>>
>>Thanks for that info, Bob.  But who presents them?  I am not on that
>>list, nor should I be. Are you going to take the ICP symbol and propose
>>it there, for example?
>
>Yes,  But Im going to wait a while to see if any others surface..
>bob

Bob:

BASE:  The Official Symbol for a BASE is a [CIRCLE with a "B" in the
middle].  The location at which primary logistics functions for an incident
are coordinated and administered.  There is only one BASE per incident.

STAGING AREA:  The Official Symbol for a STAGING AREA is a [CIRCLE with an
"S" in the middle].  Staging Areas are locations set up at an incident where
resources can be placed while awaiting a tactical assignment.  Staging areas
are managed by the Operations Section.  There can be more than one Staging
Area for an Incident.

CAMP: (I know there is already a camp symbol)  The Official Symbol for a
CAMP is a [CIRCLE with a "C" in the middle]  A camp is a geographic site,
within the general incident area, separate from the BASE, equipped and
staffed to provide food, water, and sleeping and sanitary facilities to
incident personnel.

All Ref; Emergency Management Institute/FEMA IS-195.

There are a few others such as Helibases and Helispots.  However, after
reading some of the opinions expressed in this list...It concerns me and I
have doubt that any of this matters to anyone, Bob.
If you could please consider adopting these standards, (and the definitions
provided so that these symbols would be VERY clearly defined in the future)
they would certainly fall under the "Public Service" realm of APRS and
Amateur Radio in general.

Of course all the RACES guys have been properly trained and know all of
these symbols already....Right? (okay...just picking on lazy EC's...sorry).

Jim, WA6OFT

----------------------------------------------------------------------



Read previous mail | Read next mail


 16.11.2026 09:15:17lGo back Go up