OpenBCM V1.13 (Linux)

Packet Radio Mailbox

DB0FHN

[JN59NK Nuernberg]

 Login: GUEST





  
ZL3AI  > APRDIG   03.02.03 14:28l 272 Lines 9514 Bytes #999 (0) @ WW
BID : 758-ZL3AI
Read: GUEST
Subj: TAPR Digest, Jan 21, 1/3
Path: DB0FHN<DB0RGB<DB0FSG<DB0ZKA<DB0SAA<DB0TTM<DB0SWR<DB0RBS<DB0SEL<DB0ZDF<
      DB0CWS<DB0ROF<DB0ACH<DB0OVN<DB0GOS<ON0AR<ON0AR<7M3TJZ<SP7MGD<IK6PYS<
      VK3TE<ZL2TZE<ZL3VML
Sent: 030124/1038Z @:ZL3VML.#80.NZL.OC #:58045 [Chch-NZ] FBB7.00i $:758-ZL3AI
From: ZL3AI@ZL3VML.#80.NZL.OC
To  : APRDIG@WW

TAPR APRS Special Interest Group Digest for Tuesday, January 21, 2003.

1. Re: APRS & 9600 (was Next Gen TNC )
2. Re: Next Generation TNC -- a "real" TNC, please
3. pmap3.5, pmap.ocx, and Win2000
4. Re: pmap3.5, pmap.ocx, and Win2000
5. Re: proxyAPRS...
6. VS3 Voice Chip for D700 Worthwhile?
7. Re: VS3 Voice Chip for D700 Worthwhile?
8. RE: proxyAPRS...
9. Re: proxyAPRS...
10. Roto-Rooter Joins the APRS Crowd
11. Map of hops (cool)
12. RE: Map of hops (cool)
13. Low-cost telemetry transceivers
14. Re: VS3 Voice Chip for D700 Worthwhile?
15. Re: Map of hops (cool)
16. Re: Map of hops (cool)
17. Re: Map of hops (cool)
18. Re: Map of hops (cool)
19. APRS for OziExplorer...
20. Re: Map of hops (cool)

----------------------------------------------------------------------

Subject: Re: APRS & 9600 (was Next Gen TNC )
From: sv1rd@nbg.gr
Date: Tue, 21 Jan 2003 12:06:10 +0200
X-Message-Number: 1

If we improve the idea with backbone, the hidden transmiter problem (in
access area) maybe will be solved with changing our simplex frq to duplex
Digis will be run in full duplex mode and users in half duplex 1200 or 9600.

73s Tasos sv1rd

----------------------------------------------------------------------

Subject: Re: Next Generation TNC -- a "real" TNC, please
From: Juergen Frank <db2fm@jfsattv.de>
Date: Tue, 21 Jan 2003 13:27:02 +0100
X-Message-Number: 2

am 19.01.2003 19:00 Uhr schrieb Andreas Junge - N6NU unter n6nu@arrl.net:

>So IMHO there is a need for a device that can receive AND display packets
>that fits better into our budget. The HamHud is a good beginning, but it
>still requires a stand alone TNC.
>Darryl Smith, VK2TDS has a device that plots position reports as Waypoints
>on Garmin GPS's ala Kenwood but can not display APRS messages.
> 
>I am working - mainly for my own education - on an extension of the HamHud
>principle. I used a MX614 modem chip, a 16F877 processor and a 20x4 LCD. I
>can send and receive up to 128 bytes - BTW, plenty for most position
>reports! I also will have a PS-2 style Keyboard connector on it to make it
>easier to enter Messages.
> 
>And yes, this can be made for about $50-$60 in kit form. Now you have a
>tracker that can receive - see the other thread on this on this message
>board regarding this.
> 
>More ideas ?

I just want to ensure to integrate the functionality, that Darryl Smith's
device has. So communication between your really great device (I've been
asking if there's such a device as kit or something else last week; got no
response but one asking for forwarding answers to him;) and GPS-RX should
base on the sentences $GPRMC and $GPGGA (to get speed and height besides
position) from GPS and $GPWPL to GPS.
That would be nearly get us the functionality of Kenwood's built-in TNC and
everything you normally need!

Three more things just came to my mind:
- Smart beaconing
- Smart switching of attached TRX (power down after 30 minutes without
  ignition, power up when moving again)
- optional input for car alarm (only if memory left over...)

Yes, I would be happy to distribute this kit to Germany! ;)
(also, if it would be 70,- EUR here)

Juergen, DB2FM
Schorndorf (near Stuttgart), Germany

Juergen, db2fm

-- 
DB2FM
Juergen Frank
mailto: db2fm@amsat.org
mailto: db2fm@darc.de
mailto: db2fm@jfsattv.de
ICQ:    144135020

----------------------------------------------------------------------

Subject: pmap3.5, pmap.ocx, and Win2000
From: "Tim Taylor" <Jakie@vcn.com>
Date: Tue, 21 Jan 2003 9:46:18
X-Message-Number: 3

What is required to ge the older pmap to work with win2000?

Tim/KJ7AZ

----------------------------------------------------------------------

Subject: Re: pmap3.5, pmap.ocx, and Win2000
From: Mark Sproul <msproul@jove.rutgers.edu>
Date: Tue, 21 Jan 2003 11:02:10 -0500
X-Message-Number: 4

First you need to use a version of WinAPRS that is prior to 2.6.0

Then you need to install the older version of the pmap files, I can 
email you the zip file if you need it.

There should be no problem with compatibility with Win2K and pmap 3.5

Mark Sproul

At 9:46 AM -0500 1/21/03, Tim Taylor wrote:
>What is required to ge the older pmap to work with win2000?
>
>Tim/KJ7AZ

----------------------------------------------------------------------

Subject: Re: proxyAPRS...
From: Gerry Creager <gerry.creager@tamu.edu>
Date: Tue, 21 Jan 2003 10:16:17 -0600
X-Message-Number: 5

Or, (and I'm getting the flame-retardant kevlar on here) IPv6 addressing 
for ham radio.  Then there's no requirement that we change addresses 
when you see a new AP or base.  Callsigns identify the station 
specifically, and some of the newer geoloc code helps with routing.

gerry

----------------------------------------------------------------------

Subject: VS3 Voice Chip for D700 Worthwhile?
From: Ralph Milnes <milnes1@rcn.com>
Date: Tue, 21 Jan 2003 11:17:44 -0500
X-Message-Number: 6

I was thinking about buying the VS3 voice chip for my Kenwood D700.

Do you find it useful?

Anyone found it an annoyance after they've used it a while?

Thanks,

Ralph KC2RLM

----------------------------------------------------------------------

Subject: Re: VS3 Voice Chip for D700 Worthwhile?
From: "Kurt O. Jauss" <kf6hjo@earthlink.net>
Date: Tue, 21 Jan 2003 08:57:15 -0800
X-Message-Number: 7

    Well.....
That depends.  $xx +/- for the board and it speaks. It will "letter" the
callsign that sends you a message. That will stop you from having to 
look at the display.  You can program your D-700 to use the voice board 
for the radio only,   i.e.  VFO side, frequency, mode... or use it on 
APRS only that will speak messages  to you. I don't find it as an 
annoyance. I just wished we had more HAMs with D-700's and voice boards 
installed so we could play a bit more.

    Kurt

----------------------------------------------------------------------

Subject: RE: proxyAPRS...
From: "Darryl Smith" <Darryl@radio-active.net.au>
Date: Wed, 22 Jan 2003 06:34:25 +1100
X-Message-Number: 8

Gerry

The issue is that most 802.11 access points do not do IPng. I want to
leverage the 802.11 base stations out there operated by the general
public, as well as be able to use cellphone type services that change IP
addresses as they change base stations... 

Darryl

---------
Darryl Smith, VK2TDS   POBox 169 Ingleburn NSW 2565 Australia
Mobile Number 0412 929 634 [+61 4 12 929 634 International] 
Darryl@radio-active.net.au | www.radio-active.net.au  

----------------------------------------------------------------------

Subject: Re: proxyAPRS...
From: "AE5PL Lists" <HamLists@ametx.com>
Date: Tue, 21 Jan 2003 13:56:45 -0600
X-Message-Number: 9

To expand a little upon my previous post, my primary concern is with any
type of connection where historical packets are sent which would be the
case with a server-based configuration as proposed.  APRS-IS is a
near-real-time network which depends on timely presentation of packets
to prevent loops, duplicate transmissions, etc.  Any time historical
data is injected into a real-time network, various network problems such
as loops may occur unchecked.

The reasoning behind doing a proxyAPRS port on a restricted-access basis
is to prevent these historical packets from showing back up on APRS-IS.
Remember that if the connected client is gating to RF, and the gated
packets are seen by another station gating to APRS-IS, the historical
packets will make it back into APRS-IS.

Regarding using commercially available (not modified specifically for
ham use in the ham 2.4 GHz band) 802.11b equipment from a mobile, I
wonder whether a sufficient connection can be maintained to actually
exchange data.  A connection would have to be made, the mobile would
need to login, and then data would flow.  I believe a mobile would
probably not be able to stay connected long enough for this to work.  A
fixed portable station, on the other hand, could but then it wouldn't
need the features being proposed for a proxyAPRS port.

Another concern is about what happens when the connection gets severed
without a disconnect from the client.  In this case, the server will not
know what packets the client actually got.  This is because all
operating systems buffer their TCP/IP stack.  The server could only
guess at what packets got through.  To get around this, a modification
to the APRS-IS server-client protocol would have to be created where
each packet, or packets, would need to be ack'ed at the application
level.  This could be done for this specific application, but it does
not exist today.

Again, these are just thoughts that an implementer might want to
consider.  They are not meant to dissuade someone from pursuing this
project.

73,

Pete Loveall AE5PL
pete@ae5pl.net

----------------------------------------------------------------------

Subject: Roto-Rooter Joins the APRS Crowd
From: "AE5PL Lists" <HamLists@ametx.com>
Date: Tue, 21 Jan 2003 14:02:21 -0600
X-Message-Number: 10

This link is to a story about Roto-Rooter implementing a dispatch system
based on Nextel's wireless data network and GPS-enabled Motorola phones.
Thought it was interesting that they would be using mapping displays for
their dispatchers showing where each field employee is.  Sounds like
another commercial APRS-like application to me.

http://computerworld.com/mobiletopics/mobile/technology/story/0,10801,77
698,00.html

73,

Pete Loveall AE5PL
pete@ae5pl.net

----------------------------------------------------------------------



Read previous mail | Read next mail


 16.11.2026 10:49:41lGo back Go up