OpenBCM V1.13 (Linux)

Packet Radio Mailbox

DB0FHN

[JN59NK Nuernberg]

 Login: GUEST





  
ZL3AI  > APRDIG   03.02.03 14:28l 274 Lines 9850 Bytes #999 (0) @ WW
BID : 763-ZL3AI
Read: GUEST
Subj: TAPR Digest, Jan 22, 2/5
Path: DB0FHN<DB0RGB<DB0FSG<DB0ZKA<DB0SAA<DB0TTM<DB0SWR<DB0RBS<DB0SEL<DB0ZDF<
      DB0CWS<DB0ROF<DB0ACH<DB0OVN<DB0GOS<ON0AR<WB0TAX<SP7MGD<IK6PYS<VK3TE<
      ZL2TZE<ZL3VML
Sent: 030125/1014Z @:ZL3VML.#80.NZL.OC #:58082 [Chch-NZ] FBB7.00i $:763-ZL3AI
From: ZL3AI@ZL3VML.#80.NZL.OC
To  : APRDIG@WW

Subject: Stolen Packet Node Equipment

Here is the run down of the ham equipment stolen from Walker  Mtn. Please
distribute freely to local groups, as you see fit.

Contact Joe Brown - W7ZQD - joeb@clipper.net
146 Mhz radio
Alinco model DR-112T s/n 0002426
223 mhz radio
Alinco model DR-235T s/n T101539
Terminal Node controllers (2)
MFJ model 1270C
s/n 01032739 X1-J4 firmware, callsign W7SLA-11
s/n 01032828 X1-J4 firmware, callsign W7SLA-1
12 volt power supply
Astron model 20M marked with "W7ZQD" engraved on
the  bottom
antenna duplexer
Comet model 4160
RF Filter
DCI, model 145-2H
Total replacement value $995.00

----------------------------------------------------------------------

Subject: RE: Low-cost telemetry transceivers
From: Miller Scott Contr 30SCS/FTI <Scott.Miller@vandenberg.af.mil>
Date: Wed, 22 Jan 2003 17:25:51 -0000
X-Message-Number: 8

Thanks to everyone who responded with suggestions.  Looks like used
handhelds are the way to go... there's just not enough market for telemetry
radios to bring the cost down to something reasonable.  I just picked up an
Alinco DJ-S11 on eBay for about $xx - 350 mW ought to be more than enough
for my first weather station.

Where can I find some MX-614 or equivalent modem ICs?  And has anyone
written AX.25 and APRS code for the Motorola 68HC05/08/11 series MCUs?  I
know the Microchip PICs are the popular thing these days, but I like the von
Neumann architecture and the Codewarrior development environment, and
besides, I've already got HC08 development hardware.  In fact, if I can get
AX.25 running on the HC08, I'm thinking of using one of the USB-capable
variants to build a simple 4-port USB modem interface.  Though I certainly
don't relish the idea of writing the device driver.

Scott / N6UQE

----------------------------------------------------------------------

Subject: RE: MIC-E Conversion?
From: "Curt Mills, WE7U" <hacker@tc.fluke.com>
Date: Wed, 22 Jan 2003 09:38:31 -0800 (PST)
X-Message-Number: 9

On Wed, 22 Jan 2003, AE5PL Lists wrote:

>I am not the "official" word on this, but past threads on this
>topic encouraged IGate authors to turn off Mic-E conversion in
>their software.

>The problem with Mic-E packets getting "mangled" reaches deeper
>than Mic-E conversion.  The default setting in aprsD for FILTER is
>ON.  This filtering by the TNC causes the Mic-E packet seen by the
>IGate to be mangled if it contains certain non-printable ASCII
>characters such as 0x7f.  All IGate operators should check their
>configuration files to ensure that FILTER is set to OFF on
>Kantronics TNC's and set to nothing on TNC-2 type TNC's.

1) I'll echo this:  Yes!  Please encourage all igate operators to
turn OFF Mic-E conversion!

2) Everyone (not just igate operators, but EVERYONE!) should also be
encouraged to check FILTER/MFILTER settings for their TNC, and turn
these filters OFF.  My experiences are with AEA TNC's, where MFILTER
defaults to ON.  Change it to OFF in your APRS software settings
(TNC setup file?) to help assure that there won't be more problems
in the future if the TNC gets fully reset.

3) Make sure PASSALL or GARBAGE mode is OFF in your TNC and in your
APRS TNC setup files as well.

Ok, I'm done now.

-- 
Curt Mills, WE7U                    hacker_NO_SPAM_@tc.fluke.com
Senior Methods Engineer/SysAdmin
"Lotto:    A tax on people who are bad at math!"
"Windows:  Microsoft's tax on computer illiterates!" -- WE7U
"The world DOES revolve around me:  I picked the coordinate system!"

----------------------------------------------------------------------

Subject: Findu and Icons
From: Robbie <mwrobertson@attbi.com>
Date: Wed, 22 Jan 2003 11:47:54 -0600
X-Message-Number: 10

Hi all,

I have been noticing that packets on Findu from cars, with the SSID of 
-9 and USING GPSMV, but not having ">/", are being displayed as a House, 
not the little red car.

Does this mean these TNC's need to include a Symbol as well as GPSMV, or 
is there another issue?

Thanks,

Robbie,  wa9inf

----------------------------------------------------------------------

Subject: RE: MIC-E Conversion?
From: "Phil Pacier, AD6NH" <ad6nh@arrl.net>
Date: Wed, 22 Jan 2003 13:28:27
X-Message-Number: 11

On 01/22/03, ""Curt Mills, WE7U" <hacker@tc.fluke.com>" wrote:
>1) I'll echo this:  Yes!  Please encourage all igate operators to
>turn OFF Mic-E conversion!

It's not just server (aprsD) Igates, though.  Some APRS client software 
packages, such as WinAPRS, do Mic-E conversions even when the software is 
not operating as an IGate.  This is now the fourth time I personally have 
mentioned this on the sig, but you know how it goes....  Enjoy! 73

Phillip Pacier - AD6NH
www.aprsca.net

----------------------------------------------------------------------

Subject: new IGATE on the way!
From: "Joe Della Barba" <joe@dellabarba.com>
Date: Wed, 22 Jan 2003 16:55:54 -0500
X-Message-Number: 12

I just had our local wireless internet provider do a site survey. 128k
up/256 down for $xx a month.
I have a scanner, I have a PK-12, so what do I need to be an IGATE? I have
APRS+SA. Will that do it?
When I get this stuff all online I am sure I will have more questions. FYI,
I am 2.8 miles from AA3JY-4, a WIDE with good coverage.
73
de N3HGB
Joe

----------------------------------------------------------------------

Subject: ARRL Public Service Manual regarding RACES
From: "John B. Leonard, Jr" <w9jbl@attbi.com>
Date: Wed, 22 Jan 2003 16:03:05 -0600
X-Message-Number: 13

FYI, in the context of post 9-11...
From the ARRL Public Service Manual, Section I, Chapter 4, "But in the event
that the President invokes his War Emergency Powers, amateurs involved with
RACES might be limited to certain specific frequencies (while all other
amateur operation could be silenced)."

From Table 1
Dedicated RACES Operating Frequencies

"144.50-145.71 MHz"
"146-148 MHz"
See the rest of the list of authorized freqs.

Note:  144.39 isn't in there.

Wasn't sure this was known.

jbl

----------------------------------------------------------------------

Subject: Re: new IGATE on the way!
From: "Don" <kyham@alltel.net>
Date: Wed, 22 Jan 2003 17:17:53 -0500
X-Message-Number: 14

Not familiar with APRS-SA but I use UI-VIEW and had it up and running in
about 15 minutes.  Digi, Igate, WX.

Don            K9SOA   (EM77EX)
HF-2m-70cm-APRS
www.k9soa.net

----------------------------------------------------------------------

Subject: Re: new IGATE on the way!
From: "Pat Karp" <pkarp@conwaycorp.net>
Date: Wed, 22 Jan 2003 16:46:57 -0600
X-Message-Number: 15

A computer will help - hi

Seriously have you ran APRS+SA 24/7 ?  If not then give it a try to see if
it will run stable enough on your system with out crashing.  I hear allot
about the unstableness on WinAPRS however not heard much on APRS+SA.  If you
have problems with is crashing then you can try UI-view32 or one of the
Linux apps.  UIview is easy to setup and is really stable.  I ran XASTIR for
about a year.  It really was too stable.  hihi   I went through the learning
experience of installing Linux and XASTIR then never had to mess with it.
Then came time for an upgrade and could not remember anything that I learned
the previous year.  So I decided to see what was available for windows and
found UIview.   and have been using it every since.  8)  You should find
both to be affordible.
73
Pat

----------------------------------------------------------------------

Subject: Re: new IGATE on the way!
From: "Joe Della Barba" <joe@dellabarba.com>
Date: Wed, 22 Jan 2003 17:57:01 -0500
X-Message-Number: 16

Thanks for all the advice.
APRS+SA has run for 3 or 4 days on my machine with no problems, but I will
also check into the others.
I am a little confused about the feeds. Since I cannot transmit from home, I
will only be feeding things TO the internet, not from it. BTW, I am assuming
this is OK. Sooner or later I will get a transceiver and get 2 way comms
going.
As for AA3JY-4, my boat is very near to this station and I have never seen
my packets get into the net from there. You can look at
http://www.findu.com/cgi-bin/find.cgi?call=N3HGB-5 and see. Maybe someone
can look at http://www.findu.com/cgi-bin/find.cgi?call=AA3JY-4 and tell me
if this is an IGATE or not.
If it is, I would be wasting my effort, but it doesn't appear to be.
73
de N3HGB (-5)
Joe

----------------------------------------------------------------------

Subject: Re: new IGATE on the way!
From: "Joe Della Barba" <joe@dellabarba.com>
Date: Wed, 22 Jan 2003 17:58:02 -0500
X-Message-Number: 17

http://www.findu.com/cgi-bin/find.cgi?AA3JY

Is this station the IGATE? Not the same as
http://www.findu.com/cgi-bin/find.cgi?AA3JY-4.
73 Joe

----------------------------------------------------------------------

Subject: Re: new IGATE on the way!
From: "Rich Garcia" <k4gps@bellsouth.net>
Date: Wed, 22 Jan 2003 18:00:51 -0500
X-Message-Number: 18

UI-View and other Linux variations are very nice. The one other thing you
need in addition to the PC is to check the area out. No need to have a Igate
within radio range of another. In Florida for example which is a long and
large state we have possibly only 7-9 Igates and I do not know of 1 place in
the state that you cannot make the Internet stream as long as you are within
digi coverage. If a digi can hear you your position will make it to the IS.

Joe mentioned that he was very near AA3JY (couple of miles) and I believe
AA3JY is a IGate 24/7 no need in that case to duplicate every RF packet on
the IS. The internet has a lot of bandwith but EVERYTHING has limitations
and eventually if we have too many Igates that are so close to each
other(unecessary)the stream will slow down quite a bit without good cause.

Rich

----------------------------------------------------------------------



Read previous mail | Read next mail


 16.11.2026 10:41:33lGo back Go up