| |
ZL3AI > APRDIG 03.02.03 14:28l 238 Lines 9301 Bytes #999 (0) @ WW
BID : 754-ZL3AI
Read: GUEST
Subj: TAPR Digest, Jan 20, 2/3
Path: DB0FHN<DB0RGB<DB0MRW<DB0BOX<DB0ZKA<DB0SAA<DB0GPP<DB0LX<DB0CZ<DB0GE<
DB0ZDF<DB0CWS<DB0ROF<DB0ACH<DB0ACC<DB0GOS<ON0AR<WB0TAX<SP7MGD<IK6PYS<
VK3TE<ZL2TZE<ZL3VML
Sent: 030124/1017Z @:ZL3VML.#80.NZL.OC #:58042 [Chch-NZ] FBB7.00i $:754-ZL3AI
From: ZL3AI@ZL3VML.#80.NZL.OC
To : APRDIG@WW
Subject: Recommended repeat path
From: "Randy" <wa2age@inreach.com>
Date: Mon, 20 Jan 2003 07:58:59 -0800
X-Message-Number: 10
HI,
I'll be traveling around with my D7. I have been using R,W,W for my path.
Is this still the best, or is there a better recommendation?
Look for me around Toledo <-> Chicago area this week.
Randy
WA2AGE-7
----------------------------------------------------------------------
Subject: Re: Next Gen TNC
From: sv1rd@nbg.gr
Date: Mon, 20 Jan 2003 18:03:56 +0200
X-Message-Number: 11
>To: "TAPR APRS Special Interest Group" <aprssig@lists.tapr.org>
>Subject: [aprssig] Re: Next Gen TNC
>From: "Ev Tupis (W2EV)" <w2ev@arrl.net>
>Date: Sat, 18 Jan 2003 08:05:28 -0500
>
>---------------------------------------------------------------------------
>
>Darryl,
>I think these are two different things...
>
>>>In my vision, APRS should be an aplication for a stable high speed data
>>>system (500kbps-10Mps)
>>>In wich Network Nodes should connected each other with radio or
>>Internet, like Amprnet network.
>>
>>With the greatest respect this is a unrealistic idea. The issue here is
>>that APRS is MOBILE. Higher bit rates and higher frequencies do not seem
>>to work as well when MOBILE.
>
>The first talks about a backbone connecting network appliances, while I
think
>you are talking about vehicle-to-network appliance circuits.
>
>Ev, W2EV
That's true
Bob's proposal for 'Backbone' is close, let's improve his idea
Tasos
----------------------------------------------------------------------
Subject: Re: APRS & 9600 (was Next Gen TNC )
From: "Dakota Summerhawk" <wypcguy@hotmail.com>
Date: Mon, 20 Jan 2003 10:26:36 -0700
X-Message-Number: 12
If memory serves, dosent the propagation behave different on 70cm than 2m?
and dosent the doppler shift have something to do with it for 70cm and
mobile stations? I am drawing a paralell from ground stations and sat
tracking. Would it not be easier to have the 1200 for mobile stations and
9600 for fixed? Or is this already happening?
Peter N0WRE
----------------------------------------------------------------------
Subject: Re: IBM Thinkpad battery
From: James Washer <washer@trlp.com>
Date: Mon, 20 Jan 2003 10:43:32 -0800
X-Message-Number: 13
Well, this isn't much help... but it is on IBM's website.
http://www.pc.ibm.com/qtechinfo/MIGR-4MSHUC.html?lang=en_US&brand=IBM+ThinkPad&m
faily=&machineType=&doctype=&subtype=All
Bottom line... after this thing bounces around in your car for a couple of
years... is it going to have much life left in it?
- jim
----------------------------------------------------------------------
Subject: Re: Schematic Software
From: Bob Bruninga <bruninga@usna.edu>
Date: Mon, 20 Jan 2003 16:03:25 -0500 (EST)
X-Message-Number: 14
Thanks for the help!
Bob
----------------------------------------------------------------------
Subject: Re: APRS & 9600 (was Next Gen TNC )
From: "Rich Garcia" <k4gps@bellsouth.net>
Date: Mon, 20 Jan 2003 17:03:07 -0500
X-Message-Number: 15
I have often thought about this but not exactly along your lines. Picket
fencing would be interesting to see on UHF. In some cases it may really be
worse there is more of it with deeper nulls but it would be shorter in
duration. Since we would be at 9600 and the frequency could handle more then
we could increase the beacon rate to make up for it. The more packets we
send out the better chances we have to get in as mobiles as long as the
frequency can handle the traffic.
2nd thing I would worry about while mobile is ghost stations. On UHF the
range will not be as good for direct copy and home stations beaconing out
will probably not hear the mobiles or at least enough for the DCD. If this
is the case then home stations would end up sending packets on top of a
mobile beacon and chances are with capture effect the digi will hear a base
much better so we would lose that mobile packet. Another reason for high
rates on mobile stations BUT we are talking 9600 baud here, I would hate to
see everyone set up a 1 minute or less rate on 1200!!
Rich
----------------------------------------------------------------------
Subject: Re: APRS & 9600 (was Next Gen TNC )
From: "Dakota Summerhawk" <wypcguy@hotmail.com>
Date: Mon, 20 Jan 2003 15:47:19 -0700
X-Message-Number: 16
Ok so I am going out on a limb here. Does that mean that the backbone is not
set up for 9600? But if it was that the faster position rates (ie: 1 min
intervals) would work? If the path from mobile to mobile was set to path
relay,wide,3-3 there would be be some chance of hitting a digi somewhere to
be able to get in the system? I am not very good in equipment but is most of
the equipment set up to NOT transmit when other stations are on the air? I
know that some "Dumb trackers" dont have this function and transmit "in the
blind" no matter if there is traffic or not. I can see the difference for
running a higher data rate has more advantage of a faster network if the
system is ready for it. I take it from the email that the Igate would not
have a problem if the traffic went to 9600?
I am still learning on all of this as I have been playing with APRS for
about a year now and am still getting my feet wet so to speak.
Thanks for the information.
Peter N0WRE
----------------------------------------------------------------------
Subject: Re: APRS & 9600 (was Next Gen TNC )
From: "Rich Garcia" <k4gps@bellsouth.net>
Date: Mon, 20 Jan 2003 18:08:57 -0500
X-Message-Number: 17
Yes a TNC will not (and even the pic based trackers) transmit over another
station as long as the user has a receiver and connected it to the TNC or
PIC. There was at one time several people using TX only units out there for
trackers and I hope there are not a lot of them.
The TNC DCD or the PIC presudo DCD will prevent PTT when the DCD is lit but
the point is that UHF is shorter range than VHF. It is difficult enough on
VHF to avoid collisions but on UHF it may be more difficult. Remember a DIGI
can hopefully hear everything so a digi will not collide and hopefully your
tracker will not collide with the digi. BUT there are lots more stations on
a frequency than just a digi (that can hopefully hear as good as it can TX!!
there are a lot that cannot).
Say a home station on 9600 baud UHF or even 1200 baud UHF is 5 miles south
of a digi and you have a mobile 5w tracker (heck even 30W) 14 miles north of
a digi going at 55 MPH down the road behind trees and buildings. The digi
will probably hear you and not TX but how about that home station 19 miles
away with an antenna at 20 or so feet if that ? Chances are very good that
the home station will not hear you and then key up right over your position
report. Who will the digi hear 9 out of 10 times ? The stationary station
(probably beaconing every 5 minutes or less) 5 miles away or the low power
tracker behind the buildings and trees 14 miles away ? So the problem is not
with the digi but with distant stations within range of the digi that cannot
hear each other.
Some ways to aliviate this problem is to have home stations on another
frequency/port or have gentlemen rules for stationary operation and mobile
operation. Low power and slow position reports for home stations would be a
start, possibly even requesting home stations to have at least a somewhat
decent antenna system to increase the chances that it will hear a mobile and
prevent talk over. High TX rates for mobiles and as I have always suggested
keep the 2-5w trackers in a box awaiting the next marathon. You are going to
need more than 5W from a mobile on UHF 9600 to cut it, even on VHF people
wonder why they have irratic plots on their map with a HT tracker. Unless
you have digi's at 3K feet and great coverage they are more hassle than what
they are worth and interest for the future is a lower but higher count of
digi's. I don't ever forsee us building a cellular network where digi's are
placed every 6 miles or less. Maybe lower and more but not that many more.
Rich K4GPS
----------------------------------------------------------------------
Subject: VS-3 board an the D-700
From: "Kurt O. Jauss" <kf6hjo@earthlink.net>
Date: Mon, 20 Jan 2003 16:06:21 -0800
X-Message-Number: 18
After seeing a message that was posted on the HT APRSSIG, I started
to play with sending messages to my D-700. Here is what I found.
(the two characters must be in brackets)
[5a] MEMORY [5b] SQUELCH
[5c] POWER [5d] #
[5e] * [5f] HELLO
[52] HIGH [53] MEDIUM
[54] LOW [55] EL
[56] ERROR [57] ENTER
[58] CLEAR [59] RESET
[6a] MENU [6b] ON
[6c] OFF [6d] UP
[6e] DOWN [6f] PS
[60] MHz [61] KHz
[62] METER [63] CENTIMETER
[64] DB [65] MINUS
[66] PLUS [67] OPEN
[68] CHANNEL [69] OVER
[7a] POINT [7b] VFO
[7c] (UNCLEAR) [7d] PM
[70] ZERO [71] TWO
[73] THREE and so on...
Other character combinations in the 4 range and 8 range spoke French
and Japanese Enjoy, YMMV
Kurt
----------------------------------------------------------------------
Read previous mail | Read next mail
| |