OpenBCM V1.13 (Linux)

Packet Radio Mailbox

DB0FHN

[JN59NK Nuernberg]

 Login: GUEST





  
ZL3AI  > APRDIG   03.02.03 14:28l 213 Lines 8214 Bytes #999 (0) @ WW
BID : 766-ZL3AI
Read: GUEST
Subj: TAPR Digest, Jan 22, 5/5
Path: DB0FHN<DB0RGB<DB0MRW<DB0ERF<DB0SAW<DB0MAR<DB0RDB<OZ5BBS<OZ3BUL<ON0AR<
      7M3TJZ<SP7MGD<IK6PYS<VK3TE<ZL2TZE<ZL3VML
Sent: 030125/1019Z @:ZL3VML.#80.NZL.OC #:58085 [Chch-NZ] FBB7.00i $:766-ZL3AI
From: ZL3AI@ZL3VML.#80.NZL.OC
To  : APRDIG@WW

Subject: Re: WX directional antenna options
From: Bob Bruninga <bruninga@usna.edu>
Date: Wed, 22 Jan 2003 20:11:28 -0500 (EST)
X-Message-Number: 37

The DJ-S11 used for packet must use a TNC that has open-squelch DCD
because you must put a rubber band around the "monitor" button to keep the
squelch open.

This is because the RX has power saver mode that cannot be disabled.
After 5 seconds, the RX goes to sleep and only wakes up for 0.2 seconds
every second.  Thus, it misses almost all packets (unless your channel in
your area is ALWAYS busy.. then its not so bad..  But if it is by itself,
it will not hear most of anything...

----------------------------------------------------------------------

Subject: Re: new IGATE on the way! (CQ AA3JY)
From: Steve Dimse <k4hg@tapr.org>
Date: Wed, 22 Jan 2003 20:21:02 -0500
X-Message-Number: 38

On 1/22/03 at 8:03 PM bruninga@usna.edu (Bob Bruninga) sent:

>>You can't tell if a station is a IGATE or not unless they have the proper
>>ICON for it and still that is not 100%. With some detective work on the path
>>statements you see on findu you can get a good idea who is the IGATE.
>
>One thing we want is for all PERMANENT Igates to use the "I&" ICON which is
>the GATEWAY ICON but with an "I" overlay.  If we can get people to do
>that, then we can get a much better idea of the reliability of our APRS
>network.
>
>I think WinAPRS and others default to using the "TCPIP" callsign.  I used
>to want everyone to change to the proper IGATE ICON (as notedd above), but
>now I think it is better to let casual Igates use the default, and those
>permanent 24/7 IGates to make the change so that we can see the
>difference...

There are problems with this, Bob. My Keys station, when it is on RF, is an
IGate, weather station, and a digi...and I want to use the IOTA icon
anyway. How do multiple use stations fit into your scheme?

Note that with the Q construct, we have a reliable way of determining who
the IGates are, all it takes is software to look at these over time, to
give reliability figures for each one, and do dynamic mapping of online
systems. I'm not going to have time to do this for a while, but it is
something that would make a nice, well defined project for someone else.

Steve K4HG

----------------------------------------------------------------------

Subject: Re: new IGATE on the way! (CQ AA3JY)
From: Bob Bruninga <bruninga@usna.edu>
Date: Wed, 22 Jan 2003 20:24:59 -0500 (EST)
X-Message-Number: 39

On Wed, 22 Jan 2003, Steve Dimse wrote:

>>Onething we want is for all PERMANENT Igates to use the "I&" ICON which is
>>the GATEWAY ICON but with an "I" overlay.  If we can get people to do
>>that, then we can get a much better idea of the reliability of our APRS
>>network.

>There are problems with this, Bob. My Keys station, when it is on RF, is
>an IGate, weather station, and a digi...and I want to use the IOTA icon
>anyway. How do multiple use stations fit into your scheme?

Yep, multiple use is a problem. Here the WX symbol is more important...

>Note that with the Q construct, we have a reliable way of determining
>who the IGates are, all it takes is software to look at these over time,
>to give reliability figures for each one, and do dynamic mapping of
>online systems. I'm not going to have time to do this for a while, but
>it is something that would make a nice, well defined project for someone
>else.

Excellent idea! Wow, so many ideas, so little time...

Anyway, I still think its a good idea for IGates that are permenant -and-
are still using the old TCPIP icon, to change to the GATE with the "I"
overlay just to clean things up a bit...

Bob

----------------------------------------------------------------------

Subject: Re: ID Digipeaters
From: Mark Cheavens <mcheavens@usa.net>
Date: Wed, 22 Jan 2003 19:29:33 -0600
X-Message-Number: 40

I can confirm that these three are all UIDigi roms and do not support ID!

I wonder what packets triggered this. I know that the TX-2 digi was not on 
the previous list....

Mark
At 08:08 PM 1/22/2003 -0500, Bob Bruninga wrote:
> WD5IYT-1  41   31  -99
> WD5IYT-2  152  30  -98
>  AI5TX-2  21   30  -96

----------------------------------------------------------------------

Subject: Re: ID Digipeaters
From: Steve Dimse <k4hg@tapr.org>
Date: Wed, 22 Jan 2003 20:48:26 -0500
X-Message-Number: 41

On 1/22/03 at 8:08 PM bruninga@usna.edu (Bob Bruninga) sent:

>FIXING the Network (ID digis):

OK, as long as we are covering errors, I've noticed a surge in parsing
errors reported by findU. Please check the list below for any calls under
your control that may beed fixing...there are a lot of bad digi beacons
(common since they are manually entered), and what I think are a few errors
in new client programs.

http://www.findu.com/parse-errors.html

Not everything in here is a fixable error, I have not gone through the list
manually. For example the IGate serial port dropped char issue created some
of these, as have the combined packet issue. There may also be some errors
in my parser, if you see something that you think should be parsed, please
let me know.

Steve K4HG

----------------------------------------------------------------------

Subject: Re: new IGATE on the way! (CQ AA3JY)
From: Steve Dimse <k4hg@tapr.org>
Date: Wed, 22 Jan 2003 20:50:06 -0500
X-Message-Number: 42

On 1/22/03 at 8:24 PM bruninga@usna.edu (Bob Bruninga) sent:

>>>Onething we want is for all PERMANENT Igates to use the "I&" ICON which is
>>>the GATEWAY ICON but with an "I" overlay.  If we can get people to do
>>>that, then we can get a much better idea of the reliability of our APRS
>>>network.
>
>>There are problems with this, Bob. My Keys station, when it is on RF, is
>>an IGate, weather station, and a digi...and I want to use the IOTA icon
>>anyway. How do multiple use stations fit into your scheme?
>
>Yep, multiple use is a problem. Here the WX symbol is more important...

I disagree...the icon should not be depended upon for anything, and
therefore I use the IOTA icon.

Steve K4HG

----------------------------------------------------------------------

Subject: Re: new IGATE on the way! (CQ AA3JY)
From: "Ev Tupis (W2EV)" <w2ev@arrl.net>
Date: Wed, 22 Jan 2003 22:14:32 -0500
X-Message-Number: 43

>>>There are problems with this, Bob. My Keys station, when it is on RF, is
>>>an IGate, weather station, and a digi...and I want to use the IOTA icon
>>>anyway. How do multiple use stations fit into your scheme?
>>
>>Yep, multiple use is a problem. Here the WX symbol is more important...
>>
>I disagree...the icon should not be depended upon for anything, and therefore I
>use the IOTA icon.

Not for nuthin' guys, but BEACONet has a protocol which describes the
personality of the originating station.  APRS has something close called
PHG, but it falls short in that there are parameters that may be important
to know, but aren't included, including a station's "Network Personalities"
(plural, as Steve has pointed out...one station may have several
personalities).  Maybe this is an opportunity to revisit the PHG system to
expand it to include other important information?

Ev, W2EV

----------------------------------------------------------------------

Subject: Re: WX directional antenna options
From: WA8LMF2@aol.com
Date: Wed, 22 Jan 2003 23:16:00 EST
X-Message-Number: 44

In a message dated 1/22/2003 5:05:27 PM Pacific Standard Time, 
Scott.Miller@vandenberg.af.mil writes:

>I think someone here mentioned corner reflectors awhile back -
>can they be made a reasonable size a 144.39?

A corner reflector is a couple of joined surfaces, each somewhat larger than 
a half-wave on a side   formed around a 1/2-wave dipole. A corner reflector 
would be at least as large as a 2 or 3 el yagi at a given frequency.  The 
advantage is the almost infinite front-to-back ratio compared to a yagi.  

Stephen H. Smith                   wa8lmf @ aol.com 
Home Page:                                         http://wa8lmf.com
Ham Radio/Mobile SSTV page:     http://members.aol.com/wa8lmf/ham
APRS Stuff                                              
http://members.aol.com/wa8lmf/aprs

---

END OF DIGEST


Read previous mail | Read next mail


 16.11.2026 11:05:44lGo back Go up