| |
ZL3AI > APRDIG 03.02.03 14:27l 265 Lines 9411 Bytes #999 (0) @ WW
BID : 741-ZL3AI
Read: GUEST
Subj: TAPR Digest, Jan 18, 1/6
Path: DB0FHN<DB0RGB<OK0PPL<RZ6HXA<SP7MGD<ZL3VML
Sent: 030122/0936Z @:ZL3VML.#80.NZL.OC #:57913 [Chch-NZ] FBB7.00i $:741-ZL3AI
From: ZL3AI@ZL3VML.#80.NZL.OC
To : APRDIG@WW
TAPR APRS Special Interest Group Digest for Saturday, January 18, 2003.
1. Re: [ Robbie ] Re: D700 Mute
2. Fast A/D+D/A ? (Re: Next Generation TNC
3. Does a tracker require receive?
4. Re: Next Gen TNC
5. Re: Next Generation TNC -- a "real" TNC, please - A Reply
6. Re: Next Gen TNC
7. Re: Next Gen TNC
8. Re: Next Gen TNC
9. Re: Next Generation TNC -- a "real" TNC, please - A Reply
10. Next Gen TNC $159
11. Re: Next Generation TNC -- a "real" TNC, please - A Reply
12. SA4 & UIview ??
13. Re: [ Robbie ] Re: D700 Mute
14. Re: Next Generation TNC -- a "real" TNC, please
15. Re: Fast A/D+D/A ? (Re: Next Generation TNC
16. Re: Does a tracker require receive?
17. Re: Next Generation TNC -- a "real" TNC, please - A Reply
18. Re: Next Generation TNC -- a "real" TNC, please
19. Re: Does a tracker require receive?
20. Re: Does a tracker require receive?
21. Re: Next Generation TNC -- a "real" TNC, please - A Reply
22. Re: Does a tracker require receive?
23. Re: Next Generation TNC -- a "real" TNC, please
24. Re: Next Gen TNC $159
25. Re: Does a tracker require receive?
26. Re: Next Generation TNC -- a "real" TNC, please
27. Horrendously long path being advocated on APRS website...
28. Re: Next Generation TNC -- a "real" TNC, please - A Reply
29. RE: Horrendously long path being advocated on APRS website...
30. Re: Next Gen TNC
31. RE: Horrendously long path being advocated on APRS website...
32. 2002 TAPR Digi Conference Audio
33. APRSEast Downtime
34. Re: Computer reliability
35. Re: SA4 & UIview ??
36. Lost Manual for Yaesu/Vertex VX-150
37. New version of Server based filtering - javAPRSFilter 1.2
38. DOS serial port
39. Re: Does a tracker require receive?
40. Re: Next Generation TNC and the RF BACKBONE
41. Re: Lost Manual for Yaesu/Vertex VX-150
42. Re: Lost Manual for Yaesu/Vertex VX-150
43. RE: Horrendously long path being advocated on APRS website...
----------------------------------------------------------------------
Subject: Re: [ Robbie ] Re: D700 Mute
From: Robbie <mwrobertson@attbi.com>
Date: Sat, 18 Jan 2003 00:18:14 -0600
X-Message-Number: 1
Comment below,
Bob Bruninga wrote:
>On Fri, 17 Jan 2003, Robbie wrote:
>
>>Not if your CTCSS is on and set to 100.0, I would in no way listen to
>>the braaps either!! :-)
>
>We call the CTCSS 100 on 144.39 the "APRS Voice-Alert" because it allows
>you to call a local D700 that you need to talk to by just giving a quick
>voice call and you will know that he is listening....
>
>Running APRS-Voice-Alert on the A side makes it very easy to say "good
>morning" on the A side without having to wait 5 minutes for your
>turn or to interrupt the very busy QSO's on the commuter repeater.
>
>I would not rush to judgment until you have tried it.
Ah, but in fact I am a D700 owner... and use it Bob.. But around Chicago
the packet is never ending but I don't hear it, but as soon as another
D700 sends a packet, the D700 holds the data for a few seconds at least,
after it opens the CTCSS allowing us to see the call sign, or at least
know someone is near by the receiver's squelch opening up with the
Braap, :-)
Have you tried it with the CTCSS set to 100? You won't hear anything
until a station running TONE set at 100. So, I am not rushing to
judgment, but I don't have to listen to the packet and uhf/vhf at the
same time and getting the xyl ticked off with all the noise, :-)
Robbie
----------------------------------------------------------------------
Subject: Fast A/D+D/A ? (Re: Next Generation TNC
From: "Douglas Quagliana" <dquagliana@hotmail.com>
Date: Sat, 18 Jan 2003 07:01:07 +0000
X-Message-Number: 2
Jeff King <jeff@aerodata.net> writes:
>THE SOFTWARE/HARDWARE EXISTS TODAY TO DO THIS "NEXT GEN TNC",
[...]
>We HAVE a ethernet TNC, we HAVE a USB TNC, we have advanced open source
>networking,
Do we have a fast ( > 100,000 samples per second ) analog-to-digital and
digital-to-analog converter that interfaces to ethernet (or USB) that
doesn't cost a fortune? Where?
Once you have the A/D and D/A, everything else can be just software.
Douglas KA2UPW
----------------------------------------------------------------------
Subject: Does a tracker require receive?
From: Adi Linden <adil@adis.on.ca>
Date: Sat, 18 Jan 2003 01:26:52 -0600 (CST)
X-Message-Number: 3
Hi,
Just testing the waters here to see how important it might be that a
tracker for position reporting only can actually receive and respect COS.
My opinion is that since the receiver will likely be unable to hear most
of the stations, it wouldn't make much sense to actually go through the
hassle of adding carrier detect to a tracker. Am I way of track here?
Adi
----------------------------------------------------------------------
Subject: Re: Next Gen TNC
From: "Darryl Smith" <Darryl@radio-active.net.au>
Date: Sat, 18 Jan 2003 20:50:27 +1100
X-Message-Number: 4
>We intend to continue use 1200 bps in the future?
>
>In my vision, APRS should be an aplication for a stable high speed data
>system (500kbps-10Mps) In wich Network Nodes should connected each other
>with radio or Internet, like Amprnet network.
With the greatest respect this is a unrealistic idea. The issue here is
that APRS is MOBILE. Higher bit rates and higher frequencies do not seem
to work as well when MOBILE.
The issue I believe is Rayleigh fading, as well as Eb/No issues causing
lower reliability with the uplink of data.
Darryl
---------
Darryl Smith, VK2TDS POBox 169 Ingleburn NSW 2565 Australia
Mobile Number 0412 929 634 [+61 4 12 929 634 International]
Darryl@radio-active.net.au | www.radio-active.net.au
----------------------------------------------------------------------
Subject: Re: Next Generation TNC -- a "real" TNC, please - A Reply
From: "Darryl Smith" <Darryl@radio-active.net.au>
Date: Sat, 18 Jan 2003 21:10:31 +1100
X-Message-Number: 5
People
I am writing now since this subject has come up - and I do not want to
say much at the moment. But I want to say something to attempt to douse
some of the disussion here on the subject. And Maybe find some
assistance with a project.
Work is underway on a next generation TNC, called the eTNC, for
embedded, ethernet or enhanced. At the moment we are working on hardware
and software for a dual radio port, tripple serial port and RS-485 port
device - running on a device that contains 512K flash and 512K RAM as
well as ethernet. Oh, and it is easy to construct without resorting to
surface mount... At the moment the pcb looks like being about 4" x 7".
We are planning to add many of the requirements that have been
discussed, and I will be going through the requirements that people are
requesting in detail, and add them to the wish list for a TNC.
With that said, I think we need to put this subject to bed until we have
something to release.
Darryl
P.s. At the moment we are looking for people who can program in C and if
possible have experience with the Rabbit processor. If you have this
experience please contact me.
---------
Darryl Smith, VK2TDS POBox 169 Ingleburn NSW 2565 Australia
Mobile Number 0412 929 634 [+61 4 12 929 634 International]
Darryl@radio-active.net.au | www.radio-active.net.au
----------------------------------------------------------------------
Subject: Re: Next Gen TNC
From: "Andrew Rich" <andrew.rich@bigpond.com>
Date: Sat, 18 Jan 2003 20:27:24 +1000
X-Message-Number: 6
How do the race cars do telemetry ?
----------------------------------------------------------------------
Subject: Re: Next Gen TNC
From: "Darryl Smith" <Darryl@radio-active.net.au>
Date: Sat, 18 Jan 2003 22:37:11 +1100
X-Message-Number: 7
I know a lot about this...
In order for the data to get through at high speeds, there needs to be a
good Signal to Noise raito, per bit. That means that if you want to
increase the power you can get higher speeds.
Race Cars use
* very SHORT links
* LINE OF SITE LINKS
* Low speed telemetry... Not at speeds of 500k at least...
For the data it tends to be low speed links. The microwave links that
may be used for telemetry are all line of site... They are relatively
high power, and high bandwithd - maybe 8 MHz. any fading might work for
100 khz, but not for that range.
Now, if hams were prepared to donate the 2M band to APRS Wideband we
could do some cute things :-)
Darryl
---------
Darryl Smith, VK2TDS POBox 169 Ingleburn NSW 2565 Australia
Mobile Number 0412 929 634 [+61 4 12 929 634 International]
Darryl@radio-active.net.au | www.radio-active.net.au
----------------------------------------------------------------------
Subject: Re: Next Gen TNC
From: "Ev Tupis (W2EV)" <w2ev@arrl.net>
Date: Sat, 18 Jan 2003 08:05:28 -0500
X-Message-Number: 8
Darryl,
I think these are two different things...
>>In my vision, APRS should be an aplication for a stable high speed data
>>system (500kbps-10Mps)
>>In wich Network Nodes should connected each other with radio or
>Internet, like Amprnet network.
>
>With the greatest respect this is a unrealistic idea. The issue here is
>that APRS is MOBILE. Higher bit rates and higher frequencies do not seem
>to work as well when MOBILE.
The first talks about a backbone connecting network appliances, while I think
you are talking about vehicle-to-network appliance circuits.
Ev, W2EV
----------------------------------------------------------------------
Read previous mail | Read next mail
| |