| |
ZL3AI > APRDIG 03.02.03 14:27l 225 Lines 9117 Bytes #999 (0) @ WW
BID : 749-ZL3AI
Read: GUEST
Subj: TAPR Digest, Jan 19, 2/5
Path: DB0FHN<DB0RGB<OK0PPL<RZ6HXA<SP7MGD<7M3TJZ<ON0AR<ZL2BAU<ZL3VML
Sent: 030123/1037Z @:ZL3VML.#80.NZL.OC #:57975 [Chch-NZ] FBB7.00i $:749-ZL3AI
From: ZL3AI@ZL3VML.#80.NZL.OC
To : APRDIG@WW
Subject: Re: Next Generation TNC -- a "real" TNC, please - A Reply
From: "Dakota Summerhawk" <wypcguy@hotmail.com>
Date: Sun, 19 Jan 2003 07:34:48 -0700
X-Message-Number: 5
I think that some on the list need to be reminded that this is a HOBBY and
some of us have real jobs that need to take priority over the hobby in the
first place. Being able to have time to play on hobbies takes a back seat to
the suport of a roof over my head and food on the table. Slamming a group
that are trying to help the hobby is not right as they are doing it for the
good of the group and have a higher priority for the most part.
My opinion is none other than my own so if you want to gripe about it send
them to me direct: wypcguy@hotmail.com
Thanks
Peter N0WRE
----------------------------------------------------------------------
Subject: D700 "TNC OPENING" burp
From: Ralph Milnes <milnes1@rcn.com>
Date: Sun, 19 Jan 2003 09:53:36 -0500
X-Message-Number: 6
This was posted yesterday on the HTAPRS SIG, but got little reaction. I
don't know if that's because there are fewer Kenwood D700 owners there
(than here) or no one really had anything to contribute. (Rhetorical
question: I wonder how many D700 users are also on the HTAPRS sig? Further
rhetorical question: Is it time to fold the HTAPRS SIG yet? It seems the
few questions there could be handled here. I think it's outlived it's
usefulness and just makes it harder to know where to ask your question.)
*********
I have a new D700 and the TNC is set to open automatically on startup.
Sometimes when I turn on the radio, the message "Opening TNC" stays on
forever. If I cycle the radio off and back on, the message always goes away
and the TNC works. I can't reliably replicate the problem, however.
I do have a GPS hooked up to the radio. Sometimes it may be on, sometimes
off when I start the radio; it may or may not have "lock" when I turn on
the radio. It doesn't seem to make much difference as to when I get the
constant message.
No other devices, such as computers, hooked up, except for an external
speaker.
I'm hard-wired direct to the battery (but fused of course); not plugged
into the car's distribution system.
I'm trying to determine if this is unique to my radio or if it's a known
bug. Has anyone else experienced this? Suggestions for making it work
properly?
I'm in digest mode, so please "cc" me direct on any responses, thank you.
73,
Ralph KC2RLM
----------------------------------------------------------------------
Subject: DFing on APRS+
From: Skip Allison <skipk9sa@ameritech.net>
Date: Sun, 19 Jan 2003 09:27:02 -0600
X-Message-Number: 7
I'm starting to use APRS+ for fox hunting since it's the only APRS
program that supports DFing. My laptop draws the DF lines as
crosshatched lines. These are a little hard to see on the map. I can't
find anywhere in the setup where you can specify the color or pattern of
the DF lines. I can find it for range circles and track lines, but not
for DF lines.
Other than that, the DFing on APRS+ looks great.
Skip
K9SA
----------------------------------------------------------------------
Subject: RE: VX-150 manual
From: "Bob D." <n2iph@comcast.net>
Date: Sun, 19 Jan 2003 10:30:11 -0500
X-Message-Number: 8
Of course you could just go straight to the source (Yaesu)
http://www.yaesu.com/amateur/pdf/manuals/vx_150.pdf
----------------------------------------------------------------------
Subject: Re: D700 "TNC OPENING" burp
From: James Smith <k9apr@tawg.org>
Date: Sun, 19 Jan 2003 10:48:27 -0500
X-Message-Number: 9
Hi Ralph, et al,
I've had the same problem here, you really notice it when it is
especially cold outside. Wants the unit warms up all seems to work well.
They're is no fix that I'm aware of for this specific problem. I did
discover if you do a reset to the unit even if cold the problem is taken
care. It sux's if you have lot's of memory channels programmed in. Been
there done that!!!! :-)
I've decided to just leave it in "PKT"mode for the winter, and it is
computer aided (Palm Pilot)... Sorry couldn't be much help in the
matter, maybe "Kenwood" will chime in on the subject??
--
73, James, K9APR
Chairman \ Coordinator
Tri-State APRS Working Group
http://www.tawg.org
mailto:k9apr@tawg.org
Run a APRS Website? Why not join the APRS Webring. http://www.tawg.org/join.htm
----------------------------------------------------------------------
Subject: Re: Does a tracker require receive?
From: Bob Bruninga <bruninga@usna.edu>
Date: Sun, 19 Jan 2003 10:50:37 -0500 (EST)
X-Message-Number: 10
On Sun, 19 Jan 2003, Cap Pennell wrote:
>Perhaps a 144.39 station could "request" info back for a determinate
>period, kind of like the new filters on port 14580? 73, Cap KE6AFE
Yes, I think that is a good idea. There are other ideas that we need to
explore too. ANything that eliminates data not needed in an area, but
allows anyone to request anything he needs.
Lets make a list of what a "Gateway" should do. Eitehr IGate or Bgate
(Backbone gate). But I will write these specifically for a BGate:
1) It sucks up evreything from RF and puts it on the Backbone
2) Msgs TO someone are 'routed' to the digi where he was last heard
(Notice NOID must be enabled at all digis for this to work well)
3) Associated with any new message, is the courtesy position report of the
distant originator
4) SPECIAL Tracking, the sysop can set up special calls for posits to come
through
5) User requests with default 1 hour timeouts. X requests to see Y's
posits for the next 60 minutes.
6) ANY object originated anywehere (WX, or whatever) that has a position
within the PHG circle of any DIGI, is routed to those digis.
Any other categories?
There are lots of arguments about the next hardare, but hams being such a
diverse lot, nothing in HAM radio is ever develped top-down from a
committee of opinions. It always develps from the bottom up, by someone
who actually sits down and DOES it. If what he does meets a need, then
HAMS will adopt it in droves. But if not, it goes nowhere..
So lets focus on what the BGate is suppsed to do, and let people implement
it on whatever platform they want.. If a cheap reproducible hardare set
is found, I'm sure people will go for it. In my opinion, what it must DO
is VERY IMPROTANT to get standardized so the end end user has COMMON
EXPECTATIONS as to how the APRS network will work, no matter where he is.
Thus we need an APRS-BACKBONE SPEC. The above list is a start.
----------------------------------------------------------------------
Subject: Re: Network Appliance: TNG -- Development *and* Discussion
From: Jeff King <jeff@aerodata.net>
Date: Sun, 19 Jan 2003 11:13:16 -0500
X-Message-Number: 11
Arrrghh!!!
On Sun, 19 Jan 2003 09:29:17 -0500, Ev Tupis (W2EV) wrote:
>>>A lot of good ideas have been generated and I don't we should
>>>now dose off into a deep sleep waiting until TAPR decides to get out of
>>>hibernation with their project.
>>
>>Realistically I think this is a bit unfair on all involved.
>
>These two points-of-view are actually pushing on the same elephant (a reference
>to a story of 10 blind men describing an elephant, each touching a different
>part).
>
>Darryl seems to be talking about the development of an "engine". Alex is
>talking about open dialogue and vision sharing. The "elephant" is the
>development of something I refer to as "APRS Network Appliance: The Next
>Generation".
If a fully developed elephant was in my front yard, I might notice it. Look
out your front window, you might be surprised at what you see.
I've been pushing the fact that this "Elephant", at least with regards to a
routing engine, is here today. We just need to open our eyes and realize it.
It is not a "great idea" as Bob is trying to put it, it is a reality, that
exists today, for those hams willing to reach out and grasp it. We are not
talking development, we are talking administration, and if you can put
together a PC, you can do this.
Getting hams to deploy *existing* smart networking appliance's at digi
sites such as DIGI-NED, APRS-NOS and other devices, that exist today, would
be my goal. It is so so so so easy to make a ruggedized PC these days, that
the arguments I have seen against them hold no basis in fact. Save the
custom development for the volume markets such as end user TNC's,
automotive applications, micro-power devices and telemetry tools. These
certainly are needed and I commend the efforts being directed at them. But
we are talking a network appliance here. Two different things and one is
not dependent on the other. In fact, they should and can compliment each
other. The Germans developed FlexNet yet it didn't replace end user
TNC's... it is a smart networking tool. Two different things.
Anyways, my goal here is to just get people to realize that the holy grail
is not always over the horizon. Sometimes it is staring you in the face and
you just don't realize it.
-Jeff
----------------------------------------------------------------------
Read previous mail | Read next mail
| |