| |
ZL3AI > APRDIG 28.12.00 16:03l 216 Lines 6770 Bytes #999 (0) @ WW
BID : 35247_ZL3AI
Read: GUEST
Subj: TAPR Digest, Dec 26, 3/4
Path: DB0ABH<DB0CWS<DB0ROF<DB0ERF<DB0BRI<DB0HAG<DB0ACH<PI8JOP<PI8ZAA<PE1NMB<
PI8RWD<PI8ZWL<HA3PG<PP5BLU<PY3KW<ZL2TZE<ZL2TZE<ZL2WA<ZL2TCX<ZL2BAU<
ZL3VML
Sent: 001227/0322Z @:ZL3VML.#80.NZL.OC #:51723 [Chch-NZ] FBB7.00g25 $:35247_ZL3
From: ZL3AI@ZL3VML.#80.NZL.OC
To : APRDIG@WW
ray@rayvaughan.com
ray@2-way.com
----------------------------------------------------------------------
Subject: Re: 10 Meter 300 baud APRS
From: Bill Vodall <wa7nwp@yahoo.com>
Date: Tue, 26 Dec 2000 11:43:17 -0800 (PST)
X-Message-Number: 9
--- Skip Allison <sallison@megsinet.net> wrote:
> Michael Francoeur wrote:
> > Is anyone doing 300 baud APRS on 10 meters? If so, what frequency?
> It doesn't appear that there is a standard for 10M APRS. I've seen
> posts from various people of 10M APRS activity on the following
> frequencies:
> 28.151 LSB
> We really ought to try to standardize a freq. I don't have a
> preference. Anybody have and reasons why a particular freq should be
> used?
I'm planning on using 28.151 to start with when I get the newly
acquired KAM hooked to the HR2510 and on the Digi_NED server.
Two reasons:
It's similar to 10.151.
It's in the middle of band segment where unattended digital
operation is allowed: 28.120-28.189 MHz
Bill V.
----------------------------------------------------------------------
Subject: Re: Installing Win95 on laptop WITHOUT a cdrom drive.
From: Bob Nielsen <nielsen@oz.net>
Date: Tue, 26 Dec 2000 12:15:55 -0800
X-Message-Number: 10
On Tue, Dec 26, 2000 at 02:19:31PM -0500, Qrpvhf@aol.com wrote:
> In a message dated 12/26/00 1:59:58 PM Eastern Standard Time,
> kd7nm@pugetsound.net writes:
>
> > Another way to accomplish this
> > (at about the same speed) would be to use LapLink or another equivalent to
> > transfer the Win95 directory from any CD equipped desktop over to the
> > laptop.
>
> No way as fast, after computing the LapLink transfer at a max speed of
> 19,200bps, it worked out to a transfer time of about 16hours! The ZIP to HD
> transfer took 15 minutes.
I haven't used LapLink (although I once used the PCTools equivalent)
but would expect that it would be able to transfer at much higher
speeds than 19,200. Buffered serial ports are useable to 115,200 bps
and parallel will do quite a bit better than that.
Bob
--
Bob Nielsen, N7XY nielsen@oz.net
Bainbridge Island, WA http://www.oz.net/~nielsen
----------------------------------------------------------------------
Subject: Re: Installing Win95 on laptop WITHOUT a cdrom drive.
From: "Mike Yetsko" <myetsko@insydesw.com>
Date: Tue, 26 Dec 2000 15:45:52 -0500
X-Message-Number: 11
First off, LapLink doesn't have to work at 19,200. Laplink,
on machines OTHER than certain specific models by a certain
3-letter company, links at 115K. Ie, a divisor of '1' in the Baud
Rate Divisor of the standard UART. (One machine has a 'bug'
in their ASIC, and if you set a divisor of '1', it will latch up
and burn... But it's an old 386.)
HOWEVER, if you scan the fleas and computer marts, you
will see people selling 'standard' LapLink cables. For serial
and for parallel hookups. The parallel hookup is MUCH
faster than you can imagine if you are used to serial LapLink,
even serial at 115K. The parallel link isn't 8-bit, as it was done
in the days of the original parallel port, but it used two
'one way' 5-bit links, and one 4 or 5 bit parallel bus, I can't
remember for sure. But I think it comes out to about 20us
per byte.
AND, you don't have to use LapLink. Win95 has this think
built in called 'internlink' that lets you mount a machines drive
over a LapLink cable, and you can just copy the stuff over
the parallel LapLink cable.
I think I picked up my last LapLink cable set for $6, and that
included BOTH a serial (with a 9 and 25 pin EACH end)
AND a separate 25-25 pin parallel cable.
In my case, before I bought a 'manufactured' LapLink cable,
I used to use a 25-pin ribbon cable with both a MALE and
a FEMALE on EACH end, that way I could hook
anything to anything. Yes, it was 'straight through'. Then
I took a DB-25 shell and put a male and a female on it. And
cross-wired inside the shell to make it a LapLink/Interlink
cable.
If you can't find the info to make a parallel crossover cable
send me email and I will dig it out. I'd include it as part of this
message, but I got a new machine and don't have that file on
this one.
Mike
----- Original Message -----
In a message dated 12/26/00 1:59:58 PM Eastern Standard Time,
kd7nm@pugetsound.net writes:
>
:> > Another way to accomplish this
:> > (at about the same speed) would be to use LapLink or another
equivalent to
:> > transfer the Win95 directory from any CD equipped desktop over to
the
:> > laptop.
:>
:> No way as fast, after computing the LapLink transfer at a max speed of
:> 19,200bps, it worked out to a transfer time of about 16hours! The ZIP
to HD
:> transfer took 15 minutes.
:>
:>
:> Jacob Tennant,K8JWT
----------------------------------------------------------------------
Subject: Re: DR-135
From: "Henk de Groot" <henk.de.groot@hetnet.nl>
Date: Sun, 24 Dec 2000 17:21:22 +0100
X-Message-Number: 12
Hello Jeff,
> I find it hard to believe that TASCO made it. In the sense they
> have been making TNC's for some time, and there are so many oversights
> that should be second nature to any experienced TNC designer.
>
> Who said TASCO made it?
The TH-D7 said so, when I set it to TNC it starts with:
-------------------------------------------------------
bbRAM loaded with defaults
TASCO Radio Modem
AX.25 Level 2 Version 2.0
Release 09/15/99 2Chip ver 2.00
Checksum $CF
cmd:MY PE1DNN-7
MYCALL was NOCALL
cmd:PORTO $0000
PORTOUT was $0000
cmd:
-------------------------------------------------------
On the web, http://www.radiohound.com/ there is a mod with the famous
green-wire. There are two pictures of the inside of the TH-D7(A/E) where the
TASCO chip is cleary visible.
So there is no doubt where Kenwood did its shopping. Nevertheless I do not
know if TASCO also made the firmware or that Kenwood did that part. Maybe
TASCO only delivered the modem DSP and Kenwood did the rest.
Kind regards,
Henk.
----------------------------------------------------------------------
Subject: APRSD questions
From: Qrpvhf@aol.com
Date: Tue, 26 Dec 2000 18:37:57 EST
X-Message-Number: 13
I have 2 questions as to the setup of APRSD configuration file settings.
1. What command is the control of how rf2internet is handled. ie... messages
going from internet to rf are passed OK, acks from rf to internet as well as
rf messages to the internet are not going thru.
2. As to the NWS-???? messages, is there anyway to filter them as to only
certain nws offices. At the present time we are passing all NWS-WARN &
NWS-WATCH messages from internet to rf. However the trustee of the stations
callsign does not want this extra traffic going out.
Jacob Tennant,K8JWT
Read previous mail | Read next mail
| |