| |
ZL3AI > APRDIG 28.12.00 16:03l 195 Lines 6879 Bytes #999 (0) @ WW
BID : 35244_ZL3AI
Read: GUEST
Subj: TAPR Digest, Dec 26, 2/4
Path: DB0ABH<DB0CWS<DB0ROF<DK0MNL<DF0HMB<DB0HHW<DB0IL<OZ5BBS<OZ4PAC<OZ2DIZ<
7M3TJZ<HA3PG<PP5BLU<PY3KW<ZL2TZE<ZL2TZE<ZL2WA<ZL2TCX<ZL2BAU<ZL3VML
Sent: 001227/0318Z @:ZL3VML.#80.NZL.OC #:51722 [Chch-NZ] FBB7.00g25 $:35244_ZL3
From: ZL3AI@ZL3VML.#80.NZL.OC
To : APRDIG@WW
> sells them for $xx.xx - I HIGHLY recommend them - I had the station shipped
> from Mexico to NY in a single day. The station itself is a good-quality unit
> that just needs some RTV on the joints for weatherproofing. )
>
> I was thinking that it would be relatively easy to integrate the OWW for
> linux software ( http://www.melhuishs.freeserve.co.uk/simon/projects/oww/ )
> with a little glue code to the aprsd software, and thus have a weather node
> that is substantially cheaper than the Davis systems, for example.
>
> - Rich
>
> --
> Catapultam habeo. Nisi pecuniam omnem mihi dabis, ad caput tuum saxum
> immane mittam.
> Where's Rich? http://www.findu.com/cgi-bin/find.cgi?aa2ys
>
> ---
> You are currently subscribed to aprssig as: quesnelb@ve2.ele.etsmtl.ca
> To unsubscribe send a blank email to leave-aprssig-18700I@lists.tapr.org
> Questions regarding the SIG go to the SIG administrator: wa1lou@tapr.org
--
Bruno Quesnel va2bmg@videotron.ca
Genie Electrique quesnelb@ve2.ele.etsmtl.ca
Electrical Engineering queb1604@ele.etsmtl.ca
Ecole de Technologie Superieure VA2 BMG
----------------------------------------------------------------------
Subject: Re: aprsd 2.14 and RedHat 7
From: Chris Devine <vistaeng@alltel.net>
Date: Tue, 26 Dec 2000 11:13:54 -0600
X-Message-Number: 4
Thanks to everyone for the suggestions. I installed all the updates,
recompiled, and all is well.
Thanks and 73,
Chris
Bruno Quesnel wrote:
> I think this problem is known. I Think i've seen others having the same
> problem but didn't find any solution to the problem.....
>
> Chris Devine wrote:
>
> > Hello all,
> >
> > Has anyone tried aprsd 2.14 on RedHat 7? It seems to compile and run OK,
> > but it seems to have networking trouble. None of the incoming ports are
> > open, and although the IGATES seem to connect, there is no data
> > transfer. This happens with a known good aprsd.conf file.
> >
> > Is this a known problem?
> >
> > TIA & 73,
> > Chris
> > KK5XF
> >
>
> --
> Bruno Quesnel va2bmg@videotron.ca
> Genie Electrique quesnelb@ve2.ele.etsmtl.ca
> Electrical Engineering queb1604@ele.etsmtl.ca
> Ecole de Technologie Superieure VA2 BMG
----------------------------------------------------------------------
Subject: Re: Help for KB8ROP
From: "Bruce Bennett" <bruts@alltel.net>
Date: Tue, 26 Dec 2000 12:10:34
X-Message-Number: 5
On 12/18/00, "Qrpvhf@aol.com" wrote:
> There is a guy near Cleveland,Oh area callsign KB8ROP who is trying to setup
> a weather station under WinAPRS that could probably use some help.
>
> He has shown up twice today on our local screens as a weather station. First
> his position was near Waynesburg,PA then it moved to near Kingwood,WV on the
> WV/MD border.
>
> Jacob Tennant,K8JWT
Some interesting error occured somewhere along the digipeat path (or more
locally in my WinAPRS setup). A peek at findu.com and a close check up of
my station showed no positional problems though.
I'd appreciate any reports of anomolies to bruts@alltel.net, and I'll keep
monitoring. My APRS station has been on the air for a number of years, but
recently I did increase power & digi-path. WX has been on for about eight
months.
Bruce Bennett, KB8ROP
----------------------------------------------------------------------
Subject: Re: Installing Win95 on laptop WITHOUT a cdrom drive.
From: Robert Donnell <kd7nm@pugetsound.net>
Date: Tue, 26 Dec 2000 10:59:32 -0800
X-Message-Number: 6
Hmmm -I must have missed your earlier post. Another way to accomplish this
(at about the same speed) would be to use LapLink or another equivalent to
transfer the Win95 directory from any CD equipped desktop over to the
laptop. Even JNOS on the laptop could be used as an FTP server, and the
Win95 FTP client could be used - although that client is about the least
convenient one that exists.
At 08:34 PM 12/25/2000 -0500, Qrpvhf@aol.com wrote:
>A few eeks ago I was asking about how to install Windows95 onto a older
>laptop without a cdrom drive
Another benefit of having the Win95 directory on board is that if you
change your configuration in a way that requests the "CD" it will
automagicly find what it needs in that Win95 folder - so don't delete it!
73, and I hope everyone had an enjoyable Christmas.
--
Bob Donnell, KD7NM Ph:206-542-7661 kd7nm@pugetsound.net
Western Washington Amateur Radio IP Address Coordinator
--------------------- http://wetnet.wa.com/~kd7nm ------------------------
-- For recent vehicle location try: http://map.findu.com/kd7nm-9 ------
-- For recent handytalky location try: http://map.findu.com/kd7nm-7 ---
----------------------------------------------------------------------
Subject: Re: Installing Win95 on laptop WITHOUT a cdrom drive.
From: Qrpvhf@aol.com
Date: Tue, 26 Dec 2000 14:19:31 EST
X-Message-Number: 7
In a message dated 12/26/00 1:59:58 PM Eastern Standard Time,
kd7nm@pugetsound.net writes:
> Another way to accomplish this
> (at about the same speed) would be to use LapLink or another equivalent to
> transfer the Win95 directory from any CD equipped desktop over to the
> laptop.
No way as fast, after computing the LapLink transfer at a max speed of
19,200bps, it worked out to a transfer time of about 16hours! The ZIP to HD
transfer took 15 minutes.
Jacob Tennant,K8JWT
----------------------------------------------------------------------
Subject: Re: Installing Win95 on laptop WITHOUT a cdrom drive.
From: "Ray J. Vaughan" <ray@rayvaughan.com>
Date: Tue, 26 Dec 2000 14:29:07 -0500
X-Message-Number: 8
At 02:19 PM 12/26/00 -0500, you wrote:
>In a message dated 12/26/00 1:59:58 PM Eastern Standard Time,
>kd7nm@pugetsound.net writes:
>
> > Another way to accomplish this
> > (at about the same speed) would be to use LapLink or another equivalent to
> > transfer the Win95 directory from any CD equipped desktop over to the
> > laptop.
>
>No way as fast, after computing the LapLink transfer at a max speed of
>19,200bps, it worked out to a transfer time of about 16hours! The ZIP to HD
>transfer took 15 minutes.
Yet another way I've seen it done...
If the laptop and a donor computer both have network cards, it's possible to
install a basic network protocol from a floppy, th
en do a DOS copy via the network. You should be able to get a few MB/s that
way. I've done it this way, but it's been so lon
g, I've forgotten what needs to be on the floppy. If I remember right,
there's even a program in NT that makes the floppy for
you. Using this method, network admins can install the whole system via the
network.
Ray J. Vaughan, MS, CBTE, CERT
KD4BBM PG-7-15266
http://www.rayvaughan.com/
Read previous mail | Read next mail
| |