OpenBCM V1.13 (Linux)

Packet Radio Mailbox

DB0FHN

[JN59NK Nuernberg]

 Login: GUEST





  
ZL3AI  > APRDIG   29.12.00 09:51l 241 Lines 6928 Bytes #999 (0) @ WW
BID : 35193_ZL3AI
Read: GUEST
Subj: TAPR Digest, Dec 22, 2/6
Path: DB0ABH<DB0CWS<DB0ZDF<DB0AIS<DB0NDK<DB0ACH<ON0RAT<ON5VL<LX0HST<HA3PG<
      7M3TJZ<RV3DHC<F5TMZ<F5TMZ<GB7GUR<ZL2BAU<ZL3VML
Sent: 001224/0305Z @:ZL3VML.#80.NZL.OC #:51481 [Chch-NZ] FBB7.00g25 $:35193_ZL3
From: ZL3AI@ZL3VML.#80.NZL.OC
To  : APRDIG@WW


> the integrated radio/TNC market.   I'm dying to see some performance data
> on its built in 1200 and 9600 baud TNC.  Hope someone can do some
> measurements between a pair of them soon...
>
> de WB4APR, Bob
>
> ---
> You are currently subscribed to aprssig as: JREINH@IX.NETCOM.COM
> To unsubscribe send a blank email to leave-aprssig-18700I@lists.tapr.org
> Questions regarding the SIG go to the SIG administrator: wa1lou@tapr.org

---
You are currently subscribed to aprssig as: locked@intplsrv.net
To unsubscribe send a blank email to leave-aprssig-18700I@lists.tapr.org
Questions regarding the SIG go to the SIG administrator: wa1lou@tapr.org


----------------------------------------------------------------------

Subject: Re: [Re: KPC3+ Jumpers]
From: Bill Tetens <bftet@netscape.net>
Date: 22 Dec 00 06:52:20 PST
X-Message-Number: 7

I haven't looked to find the text reference to putting power on the DB 25=
 but
you can accomplish by opening the case and placing J7 into the #1 positio=
n and
J6 to the #2 position.  This will apply the 12 volts to the Rs 232 port p=
in
13.  You can also apply the voltate to pin 7 of the DB 9.  Use the suppli=
ed
schematic and parts location sheets to accomplish this.

Bill KB4ZM

Holler if you need any more help.

"Ev Tupis (W2EV)" <propnet@greeceny.com> wrote:
Actually, the jumper configuration is on page 265 of my
manual and no where does it mention the ability to put +12v
on the DB25.  Even the index under the word "Power" points
to an area that omits this information.

Has this feature been eliminated in the "plus" version of
the TNC or am I simply overlooking it in the manual?

Ev, W2EV


"Clayton H. Owen" wrote:
> =

> Alex Pinheiro Machado Rodrigues wrote:
> >
> > Hi sig.
> > I'm looking for how to configure my kpc3+ to put +12v at the db25.
> > Thanks.
> > Alex, PT2VHF
> >
> Page 245 of the KPC-3 Plus "Users Guide"
> =

> ---
> You are currently subscribed to aprssig as: PROPNET@GREECENY.COM
> To unsubscribe send a blank email to leave-aprssig-19453L@lists.tapr.or=
g
> Questions regarding the SIG go to the SIG administrator: wa1lou@tapr.or=
g



---
You are currently subscribed to aprssig as: bftet@netscape.net
To unsubscribe send a blank email to leave-aprssig-18700I@lists.tapr.org
Questions regarding the SIG go to the SIG administrator: wa1lou@tapr.org


____________________________________________________________________
Get your own FREE, personal Netscape WebMail account today at http://home=
=2Enetscape.com/webmail

----------------------------------------------------------------------

Subject: Re: Alinco DR-135 in standalone?
From: Jeff Reinhardt <jreinh@ix.netcom.com>
Date: Fri, 22 Dec 2000 06:55:51 -0800
X-Message-Number: 8

David:

What do you mean by "standalone?" As a tracker or as a digipeater?
Jeff Reinhardt AA6JR
======================================

David Locke wrote:
> 
> Is anyone getting the Alinco DR-135 in to operate in APRS in a standalone
> manner?

----------------------------------------------------------------------

Subject: Re: Alinco DR-135 in standalone?
From: K3for@aol.com
Date: Fri, 22 Dec 2000 10:55:30 EST
X-Message-Number: 9

Here's Alinco's manual on the subject, for those interested in reading up.

http://www.alinco.com/pdf.files/Ej41u-e.pdf

There are a number of commands that need to be set:
(in lieu of UNPROTO, BEACON, BTEXT)
LOCATION (10 sec time increments for xmit)
LPATH (outgoing path)
LTEXT
GBAUD (GPS baud rate)
LTMON/LTMHEAD (optional)

GPS data strings interpreted are GPGGA, GPVTG, GPZDA, GPRMC, PNTS.  Similar 
to other systems, you can operate fixed without a GPS by putting static 
position info in the LTXT buffer.

Sections 4.5 and 5.0 have the info.  I don't have an Alinco so I can't try 
it, but hope this helps.

73's,
Skip/K3FOR

----------------------------------------------------------------------

Subject: DR-135
From: "wes johnston" <wes@johnston.net>
Date: Fri, 22 Dec 2000 10:59:31 -0500
X-Message-Number: 10

This is a multi-part message in MIME format.

------=_NextPart_000_0011_01C06C06.432585B0
Content-Type: text/plain;
	charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

Can anyone tell me if the Dr135 has the same 195byte lockup problem as =
the kenwood?  It is my understanding that the kenwood d700 locks up.

Wes

[html duplicate deleted]
----------------------------------------------------------------------

Subject: Re: DR-135
From: Jeff Reinhardt <jreinh@ix.netcom.com>
Date: Fri, 22 Dec 2000 08:24:20 -0800
X-Message-Number: 11

Wes:

Have not heard anything to that effect. One big difference between the
radios is that the DR-135 does not display received packets. 
Jeff Reinhardt AA6JR
==========================

> wes johnston wrote:
> 
> Can anyone tell me if the Dr135 has the same 195byte lockup problem as
> the kenwood?  It is my understanding that the kenwood d700 locks up.
> 
> Wes

----------------------------------------------------------------------

Subject: Re: [Re: KPC3+ Jumpers]
From: rbost@itexas.net (Roy Bost)
Date: Fri, 22 Dec 2000 10:29:39 -0600
X-Message-Number: 12

If I remember correctly, on the KPC-3 the DC power comes in\out pin 25  on
the DB-25 connector and on the KPC-3+ the DC power comes in\out pin 13 on
the DB-25.  The DC in\out on the DB-9 seems to be the same - pin 7.


----------------------------------------------------------------------

Subject: Re: KPC3+ Jumpers]
From: "Alex Pinheiro Machado Rodrigues" <alex@bsbnet.com>
Date: Fri, 22 Dec 2000 14:53:16 -0200
X-Message-Number: 13

Thanks Roy.
 Can you scan this page to me? I can't find my manual...
Thanks!

Alex, PT2VHF
BRAZIL

----- Original Message ----- 
From: "Roy Bost" <rbost@itexas.net>
To: "TAPR APRS Special Interest Group" <aprssig@lists.tapr.org>
Sent: Friday, December 22, 2000 2:29 PM
Subject: [aprssig] Re: [Re: KPC3+ Jumpers]


If I remember correctly, on the KPC-3 the DC power comes in\out pin 25  on
the DB-25 connector and on the KPC-3+ the DC power comes in\out pin 13 on
the DB-25.  The DC in\out on the DB-9 seems to be the same - pin 7.


---
You are currently subscribed to aprssig as: alex@bsbnet.com
To unsubscribe send a blank email to leave-aprssig-18700I@lists.tapr.org
Questions regarding the SIG go to the SIG administrator: wa1lou@tapr.org





----------------------------------------------------------------------

Subject: Re: Alinco DR-135 in standalone?
From: Bob Bruninga <bruninga@usna.edu>
Date: Fri, 22 Dec 2000 12:10:26 -0500 (EST)
X-Message-Number: 14

I also have an ALINCO on order now for some testing and so I will gain
some experience too...    de WB4APR, Bob

On Fri, 22 Dec 2000 K3for@aol.com wrote:

> Here's Alinco's manual on the subject, for those interested in reading up.
> 
> http://www.alinco.com/pdf.files/Ej41u-e.pdf
> 
> There are a number of commands that need to be set:
> (in lieu of UNPROTO, BEACON, BTEXT)



Read previous mail | Read next mail


 16.11.2026 17:30:06lGo back Go up