| |
ZL3AI > APRS 28.10.00 07:43l 274 Lines 8000 Bytes #999 (0) @ WW
BID : 34142_ZL3AI
Read: GUEST
Subj: TAPR Digest, Oct 24, 2/3
Path: DB0MRW<DB0RGB<DB0LAN<DB0RBS<DB0LX<DB0CZ<DB0GE<LX0PAC<LX0HST<HA3PG<
VE1DRG<VK3BBS<VK2CPG<VK2CZR<VK2IO<VK2TGB<ZL2TZE<ZL2TZE<ZL2WA<ZL2BAU<
ZL3VML
Sent: 001026/1414Z @:ZL3VML.#80.NZL.OC #:45023 [Chch-NZ] FBB7.00g25 $:34142_ZL3
From: ZL3AI@ZL3VML.#80.NZL.OC
To : APRS@WW
Greetings to the SIG,
Looking for the sources of the waterproof cases(Pelican-type) and magnets I
saw on the trackers at DCC 2000. Also a website on their construction, if
available.
TIA
Lee Ciereszko N4TCW
Find Lee: http://map.findu.com/n4tcw
----------------------------------------------------------------------
Subject: Re: Opinions on UIDIGI firmware for TNC2s?
From: tarnerich@in-situ.com (Tony Arnerich)
Date: Tue, 24 Oct 2000 10:24:16 -0600
X-Message-Number: 10
Greg Noneman <greg@clubnet.net> set me straight:
>>but it does do some unnecessary dupes just like Kantronics 8.2/8.3 firmware
>Sounds like you were running version 1.7 (or earlier). Version 1.8,
>which is currently in beta, eliminates these duplications. I believe
>Marco plans to have version 1.8 fully released within the next few weeks.
Yes indeed, it was 1.7. I'm very glad to hear about the fix for this behavior
in 1.8, and thanks for correcting me! That removes any reservations I've had.
I too feel that UIDIGI in an old bargain-basement used TNC2 is THE class act
in standalone digipeaters. Fine business, Marco.
Anything else that works that well requires the addition of a computer. The
big advantage of UIDIGI in my opinion is that the digipeater is back in
action within seconds of the restoration of lost electrical power.
73,
Tony KD7TA
----------------------------------------------------------------------
Subject: Re: Portable Trackers
From: Ken Brown <W2KB@compuserve.com>
Date: Tue, 24 Oct 2000 12:42:35 -0400
X-Message-Number: 11
>> Looking for the sources of the waterproof cases(Pelican-type) <<
Look at: http://www01.bhphotovideo.com
Once at the site, the Pelican cases are in the underwater photography
and/or waterproof cases section. Discounted prices.
73,
---Ken W2KB@ARRL.net
----------------------------------------------------------------------
Subject: Re: ADMIN: We're closed
From: Mark Fellhauer <sparkfel@primenet.com>
Date: Tue, 24 Oct 2000 12:24:56 -0500
X-Message-Number: 12
And, BTW, the person(s) responsible are also doing it to individual
subscribers. Like me.
73,
Mark
KC7BXS
At 07:14 AM 10/24/00, Mike Yetsko wrote:
>OK, please remember, we are NOT BEING SPAMMED!!!!
>
>We have an individual that is intentionally registering to
>other mail list as THIS SIG.
----------------------------------------------------------------------
Subject: Not-so-smart Digipeating?
From: Ralph Milnes <milnes1@rcn.com>
Date: Tue, 24 Oct 2000 13:37:42 -0400
X-Message-Number: 13
I have a question about smart digipeating.
Let's assume A can hit two WIDEs, B and C, but can't hit D or E, and D and
E can only hear C not B.
A
B C
D
E
Let's assume C is a smart digi that will wait a few seconds to check for a
dupes.
A sends a packet via WIDE2-2.
B picks it up and digis it first.
C hears B's digi of A's packet, so it doesn't digi A's packet.
Without the relay from C, digis E and D and any APRS stations in their
range never see the packet from A.
So only stations to my southwest will see my packets; stations to the east
and southeast will never see my packet
Do I have that right? That smart digis will cut down on both dupes and
desired relays?
Ralph, KC2RLM
----------------------------------------------------------------------
Subject: PG4R cable for D7A
From: "Dwayne Moffett" <dmoffett@aaicontrols.com>
Date: Tue, 24 Oct 2000 12:44:51 -0500
X-Message-Number: 14
This is a multi-part message in MIME format.
------=_NextPart_000_001A_01C03DB8.33A7DDD0
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
Can anyone tell me where I can find a schematic for the Sky command cable
for the D7A to TS-570 radio. Or the PG4R cable that works. The only reason
I am posting it here is because there are a lot of D7A owners here.
Thanks KD5LDQ
Please answer direct to KD5LDQ @ arrl.net.
[non-text lines removed]
----------------------------------------------------------------------
Subject: Re: Not-so-smart Digipeating?
From: Dave Kaplan <dkaplan@steffeninc.com>
Date: Tue, 24 Oct 2000 13:11:12 -0500
X-Message-Number: 15
At 13:37 10/24/2000 -0400, Ralph Milnes wrote:
>I have a question about smart digipeating.
Let me take a stab at this one.
>Let's assume A can hit two WIDEs, B and C, but can't hit D or E, and D
>and E can only hear C not B.
>
> A
>
>
> B C
> D
>
> E
>Let's assume C is a smart digi that will wait a few seconds to check for a
>dupes.
>
>A sends a packet via WIDE2-2.
>B picks it up and digis it first.
I don't think "B" will digi it at all. If "B" is not a smart digi, it will
not recognize the WideN-N format and therefore not digi it at all since
Wide2-2 does not fit the Relay or Wide or Trace that non-smart digi's
recognize.
>C hears B's digi of A's packet, so it doesn't digi A's packet.
I don't think so. In this case, "B" did not digi the signal so "C" will.
Even if "B" was a smart digi, "C" still would since its has not digi'd the
signal in the past x seconds (x=user programable)
>Without the relay from C, digis E and D and any APRS stations in their
>range never see the packet from A.
But, in either case "C" will digi the signal
>So only stations to my southwest will see my packets; stations to the east
>and southeast will never see my packet
I disagree. I still think digi "B" will ignore while digi "C" will digipeat
properly.
>Do I have that right? That smart digis will cut down on both dupes and
>desired relays?
Smart digis will cut down on dupes, but I don't see how they cut down what
you call desired relays. I suspect this why many suggested using the path
WIDE,WIDE2-2 rather than just WIDE2-2. This allows for the first digi in
line to not be a "smart" digi.
>Ralph, KC2RLM
As Dennis Miller would say, "Of Course I Could Be Wrong"
Dave
WB0WNX
----------------------------------------------------------------------
Subject: Re: Portable Trackers
From: Mike Musick <mcmusick@anet-stl.com>
Date: Tue, 24 Oct 2000 15:40:46 -0500
X-Message-Number: 16
Lee asks:
>Looking for the sources of the waterproof cases(Pelican-type) and magnets I
>saw on the trackers at DCC 2000. Also a website on their construction, if
>available.
The cases are Serpac model R-100, and are available from:
[commercial content removed]
----------------------------------------------------------------------
Subject: Re: Not-so-smart Digipeating?
From: "Henk de Groot" <henk.de.groot@hetnet.nl>
Date: Tue, 24 Oct 2000 23:00:07 +0200
X-Message-Number: 17
Hello Ralph
----- Oorspronkelijk bericht -----
> A sends a packet via WIDE2-2.
> B picks it up and digis it first.
> C hears B's digi of A's packet, so it doesn't digi A's packet.
> Without the relay from C, digis E and D and any APRS stations in their
> range never see the packet from A.
>
> So only stations to my southwest will see my packets; stations to the east
> and southeast will never see my packet
It doesn't matter for this example if the digis are smart or dumb. C will
always here the packet from A first, approximately at the same time as B
does. The only way that C hears the packet from B first is if C missed the
packet from A directly. In that case there is no difference with dumb
digipeaters. Only if A repeats the transmission within the duplicate check
time a dumb digi will forward the packet where some intelligent digis will
stop it (not all, see below).
In general delivery of packets in a silent environment is guaranteed better
with dumb digis. This is because there will be an aufull lot of redundant
packets. In a more noicy environment this goes rapidly down-hill because the
redundant packets cause collisions of transmissions.
What I've done in the duplicate checking in DIGI_NED is check if the packet
Read previous mail | Read next mail
| |