OpenBCM V1.13 (Linux)

Packet Radio Mailbox

DB0FHN

[JN59NK Nuernberg]

 Login: GUEST





  
ZL3AI  > APRS     28.10.00 07:45l 240 Lines 7950 Bytes #999 (0) @ WW
BID : 34144_ZL3AI
Read: GUEST
Subj: TAPR Digest, Oct 24, 3/3
Path: DB0MRW<DB0RGB<DB0ABH<DB0ZKA<DB0KFB<DB0CZ<DB0GE<LX0PAC<LX0HST<HA3PG<
      VE1DRG<VK3BBS<VK2CPG<VK2CZR<VK2IO<VK2TGB<ZL2TZE<ZL2TZE<ZL2WA<ZL2BAU<
      ZL3VML
Sent: 001026/1432Z @:ZL3VML.#80.NZL.OC #:45024 [Chch-NZ] FBB7.00g25 $:34144_ZL3
From: ZL3AI@ZL3VML.#80.NZL.OC
To  : APRS@WW


was received directly. Then it comes straigt from the originator then is not
a duplicate but a retransmission. This will be digipeated by the digi, even
if it has the same contents. This way the local digi will always serve you
when you originate a packet.

Duplicate checking may prevent reception but also reduces the channel load
which increases the reception performance. In a quiet enrionment dumb digis
will work best. As soon as you get more traffic the dumb digis polute the
channel with an excessive amount of redundant packets. Then intelligent
digis work best.

I hope this is clear.

Kind regards,

Henk.



----------------------------------------------------------------------

Subject: Re: Not-so-smart Digipeating?
From: "Valentino Sarro, VE6SZR" <sarrov@home.com>
Date: Tue, 24 Oct 2000 18:15:23 -0600
X-Message-Number: 18

|Ralph Milnes wrote:
|I have a question about smart digipeating.

>
> Let's assume A can hit two WIDEs, B and C, but  can't hit D or E, and D and
> E can only hear C not B.

> Let's assume C is a smart digi that will wait a few seconds to check for a
> dupes.
>
> A sends a packet via WIDE2-2.

> B picks it up and digis it first.

In your example if you assume that C is the only smart digi, then B cannot
transmit a WIDEn-n encoded packet at all.....in this case C would transmit it
because it also can hear station A

Ok lets assume all the digis are smart and see the difference .....however
because A can reach both B and C, there is the possibility that B and C will
digi the WIDE2-2 packet, if they attempt to transmit at exactly the same time.

> C hears B's digi of A's packet, so it doesn't digi A's packet.

In your example, using your assumption that B transmits first, the C digi will
hear the beacon  from B as it has been decremented to WIDE2-1 and C will then
transmit again and decrement the packet to WIDE2.

>
> Without the relay from C, digis E and D and any APRS stations in their
> range never see the packet from A.

If C never gets a chance to transmit anything, yes this would seem correct.

> So only stations to my southwest will see my packets; stations to the east
> and southeast will never see my packet

refer to the above answer.

> Do I have that right? That smart digis will cut down on both dupes and
> desired relays?

This is essentially correct, smart digis reduce duplications....but to
understand this....I'll give you a better example.

Examine the system below.

                C                                                I

   B            A            D       E        F            G           H

You may assume the following:

Station A can reach digis B,C,D and B,C,D can reach each other;
Station G can reach digis F,I,H  and F,I,H can reach each other,
Digis D,E,F can reach each other.
All digis in this example are WIDE digis.

The Scenario:

If station A wanted to get packets to station G and used conventional labels
such as WIDE to achieve this, a logical choice would be a path of
WIDE,WIDE,WIDE.  BUT.....what would be the consequence of this action? Well, in
the area which surrounds station A, we could have upto 27 packets occurring
between digis B,C,D as they alternate between all ordered combinations of that
path (c,b,d)(b,c,d)(c,d,b)(d,c,b)...etc.  And we haven't even discussed the
interaction of C,D,E yet!........   It should be plainly obvious that this
would generate a huge amount of QRM.

However, an improvement would be gained if the digis here were smart digis
capable of WIDEn-n digipeating. If this were the case, then a path of WIDE3-3
could be used, in which case each digi would only digipeat once and not
duplicate any further. Thus potentially we would have a max of 5 repeats...once
each for b,c,d,e,f....

The short answer is, a smart digipeater will TX once and not duplicate any
further...and...it will continue any packet that has been decremented down to
WIDEn.

Hopefully this helps.....(I think I'll go back and learn my ABCs)  :-)

73, Tino.
VE6SZR
Calgary, Alberta


----------------------------------------------------------------------

Subject: PORTLAND MAINE APRS
From: Bob Bruninga <bruninga@nadn.navy.mil>
Date: Tue, 24 Oct 2000 20:20:09 -0400 (EDT)
X-Message-Number: 19

Help!?   I just checked APRServe and saw no activity in Portland Maine.

THis weekend will be the AMSAT Conference in Portland.  Please tell me
there is someting on the air in Portland on 144.39 or I will have a hard
time selling AMSAT on how pervasive APRS is.

If there is nothing that can be heard downtown, is there anyway possible
that someone somewhere can turn their home station into a WIDE digi for
the weekend???   Please bring in some traffic somehow someway!

I just did a MAPS-OVERLAYS-DIGIS and also it shows NOTHING that covers
PORTLAND.   Argh...

I was going to have my ususal display of APRS running inside the symposium
showing all local activity..  but a blank screen is not gonna look very
good...

 Thanks, Bob



----------------------------------------------------------------------

Subject: Re: Not-so-smart Digipeating?
From: Bob Bruninga <bruninga@nadn.navy.mil>
Date: Tue, 24 Oct 2000 20:36:16 -0400 (EDT)
X-Message-Number: 20

GOod question here.  APRS was designed with certain assumptions about
redundancy.  APRS replaces ACKS and RETIRES with multiple copies...  if we
are too successful at dupe ilimination, then the reliability of APRS goes
down.   Its a balance..  hummh...

On Tue, 24 Oct 2000, Ralph Milnes wrote about smart digipeating.
>
> Let's assume A can hit two WIDEs, B and C, but  can't hit D or E, and D and 
> E can only hear C not B.
> 
>                 A
> 
>    B          C
>                                  D
>                           E
> C is a smart digi that will wait a few seconds to check for dupes.
> A sends a packet via WIDE2-2. B picks it up and digis it first.
> C hears B's digi of A's packet, so it doesn't digi A's packet.
> Without the relay from C, digis E and D and any APRS stations in their 
> range never see the packet from A.


----------------------------------------------------------------------

Subject: APRSserve connection problem
From: Jacob W Tennant <k8jwt@juno.com>
Date: Tue, 24 Oct 2000 21:07:55 -0400
X-Message-Number: 21

I am running registered version 2.4.7 of WinAPRS of which I just did a
fresh install.

Whenever I try to connect to the aprsserve network I have two (2)
problems.

1. The only server shown is www.aprs.net 10151. Looked at the
aprserve.txt file and it has 5 or 6 other servers listed but none of the
show up in the listing of availables.

2. I get a TCP failed message from www.aprs.net 10151 everytime I try to
connect to it.

73's
Jacob Tennant
K8JWT - Home station
K8JWT-9 - Personal car

________________________________________________________________
[commercial content removed]
----------------------------------------------------------------------

Subject: Re: Weather warnings
From: Earl Needham <KD5XB@AMSAT.ORG>
Date: Tue, 24 Oct 2000 20:27:26 -0600
X-Message-Number: 22

At 10:26 AM 10/24/00 -0400, Gerald J. Stueve blasted the following out into 
the ether:
><snip>
>Try http://home.earthlink.net/~kg5qd/Maps.html for the link to a map and
>ftp site. For WinAPRS make sure you don't have to many maps within the
>Counties folder hierarchy. Check the pull-down to see that all the maps
>you need are accessible.

      OK!  Found the site, found the maps, and they're downloading now.

      Do these maps REPLACE the old ones, or SUPPLEMENT them?

      It seems really too bad that you have to download all these files 
individually, rather than having one big file with everything in it...

      Thanks, all,
      Earl


Earl Needham, KD5XB    mailto:KD5XB@AMSAT.ORG
Clovis, New Mexico         DM84jk N34d 25.446m W103d 12.700m (or so)

Pet peeve: breath is a noun,  breathe is a verb (When you take a breath, 
you breathe...)




---

END OF DIGEST



Read previous mail | Read next mail


 17.11.2026 08:30:32lGo back Go up