OpenBCM V1.13 (Linux)

Packet Radio Mailbox

DB0FHN

[JN59NK Nuernberg]

 Login: GUEST





  
ZL3AI  > APRS     25.10.00 16:19l 187 Lines 6577 Bytes #999 (0) @ WW
BID : 34122_ZL3AI
Read: GUEST
Subj: TAPR Digest, Oct 23, 1/5
Path: DB0MRW<DB0RGB<DB0ABH<DB0ZKA<DB0GPP<DB0LX<DB0CZ<DB0GE<LX0PAC<LX0HST<
      HA3PG<7M3TJZ<IK1ZNW<IK6PYS<N8ZFM<ZL2TZE<ZL2TZE<ZL2WA<ZL2BAU<ZL3VML
Sent: 001024/1052Z @:ZL3VML.#80.NZL.OC #:44739 [Chch-NZ] FBB7.00g25 $:34122_ZL3
From: ZL3AI@ZL3VML.#80.NZL.OC
To  : APRS@WW


TAPR APRS Special Interest Group Digest for Monday, October 23, 2000.

1. Re: Opinions on UIDIGI firmware for TNC2s?
2. TM-321 220 rig?
3. Re: Opinions on UIDIGI firmware for TNC2s?
4. Re: Further thoughts on dual-band TNCs and cross-freq digipeating ...
5. Re: Opinions on UIDIGI firmware for TNC2s?
6. Re: Opinions on UIDIGI firmware for TNC2s?
7. Re: Opinions on UIDIGI firmware for TNC2s?
8. Re: Opinions on UIDIGI firmware for TNC2s?
9. Re: Opinions on UIDIGI firmware for TNC2s?
10. Reply to Bob's question on UIDIGI firmware for TNC2s?
11. JOTA-APRS-FRS-SCOUTS
12. Re: Opinions on UIDIGI firmware for TNC2s?
13. Re: ADMIN: We're closed
14. Re: ADMIN: We're closed
15. Re: SPAM WhoIs
16. Re: ADMIN: We're closed
17. D7's, D700's and the old F6
18. STREETS on DISK
19. HyperJumps again....
20. Re: Opinions on UIDIGI firmware for TNC2s?
21. Last Chance
22. Re: Fwd: [APRSUK] TM-D700E Queries?
23. Re: Bearing/Distance
24. Re: HyperJumps again....
25. Re: ADMIN: We're closed
26. AMSAT Conference
27. Re: Opinions on UIDIGI firmware for TNC2s?
28. Weather warnngs

----------------------------------------------------------------------

Subject: Re: Opinions on UIDIGI firmware for TNC2s?
From: Roger Grady <k9opo@netusa1.net>
Date: Sun, 22 Oct 2000 23:47:37 -0500
X-Message-Number: 1

At 10:07 PM 10/22/00 EDT, KB7ADO@aol.com wrote:
>I'd like to hear from those who have experience with the new UIDIGI firmware 
>available to use TNC2 units as WIDEn-n digipeater tncs, compared to using 
>KPC3 or 3+ with 8.2 and 8.3 firmware.  Any problems, incompatiblities, etc., 
>that you've noticed?  After trying both out, is it still preferred to use
the 
>KPCs?  Please reply directly to reduce additional postings on the sig.

Please reply to the SIG also. Others are interested (me, at least). That's
what the SIG is for.

Roger Grady  K9OPO

----------------------------------------------------------------------

Subject: TM-321 220 rig?
From: Earl Needham <KD5XB@AMSAT.ORG>
Date: Sun, 22 Oct 2000 23:04:26 -0600
X-Message-Number: 2


      Anyone with a Kenwood TM-321, please contact me off-list.

      Thanks,
      Earl


Earl Needham, KD5XB    mailto:KD5XB@AMSAT.ORG
Clovis, New Mexico         DM84jk N34d 25.446m W103d 12.700m (or so)

Pet peeve: breath is a noun,  breathe is a verb (When you take a breath, 
you breathe...)


----------------------------------------------------------------------

Subject: Re: Opinions on UIDIGI firmware for TNC2s?
From: Greg Noneman <greg@clubnet.net>
Date: Sun, 22 Oct 2000 23:41:29 -0700
X-Message-Number: 3


>I'd like to hear from those who have experience with the new UIDIGI firmware 
>available to use TNC2 units as WIDEn-n digipeater tncs, compared to using 
>KPC3 or 3+ with 8.2 and 8.3 firmware.  Any problems, incompatiblities, etc., 
>that you've noticed?  After trying both out, is it still preferred to use 
>the 
>KPCs?  Please reply directly to reduce additional postings on the sig.
>
>Thanks.
>
>Bob, KB7ADO

-----------------
Bob,

I have been running UIDIGI on a local hilltop in Southern California 
(N6EX-4) for nearly six months.  I believe that UIDIGI is currently the 
best solution for a dedicated APRS digipeater.  Over the years, I have 
operated digipeaters based on both TNC-2 and KPC-3 controllers, so I am 
pretty familiar with the operation of both types.

There are several advantages to running UIDIGI:

(1)  You can use it on any inexpensive TNC-2 clone (PacComm, MFJ, etc.).  

(2)  It has a reduced instruction set which is catered specifically to 
APRS, so it is easier to configure.

(3)  It supports  SSID routing which permits directional packet routing 
when used with the MIC-E, TH-D7, TM-D700, etc. 

(4) But probably the most important feature is that it implements WIDEn-N 
routing correctly!  The Kantronics TNCs have a packet duplication 
checking algorithm which applies only to packets addressed to WIDEn-N.  
They do not check for duplicates where a discrete callsign or a generic 

RELAY or WIDE is used within the path.  This can cause channel congestion 
problems (a lot of duplicate packets) in a high density area such as 
SoCal, where several digis overlap the coverage area.  UIDIGI has several 
selectable parameters which can be used customize how the duplication 
checking is performed.  The testing I have performed over the past 
several months indicates that this function is working extremely well.

As far as problems or incompatibilities, I haven't encountered any.  My 
digi has been running flawlessly since early May in a local network of 
KPC-3 based WIDEn-N digis.  The only potential inconvenience is that it 
is necessary to program the EPROM that is installed in the TNC-2.  If you 
don't have this capability or have a friend that does, you would have to 
find someone to do this for you.  Once the EPROM is installed, its pretty 
much plug-and-play.  The default operational parameters (such as 
callsign, beacon rate, location, etc.) get permanently programmed in the 
EPROM (although these can be changed remotely, as with other TNC 
firmware).

In general, I think Marco Savegnago (IW3FQG) has done a great job of 
creating digipeater firmware which addresses the specific needs for APRS. 
 He has been very receptive to comments and suggestions and has released 
several updates with increased feature sets. 

I can highly recommend the use of UIDIGI.


Greg
WB6ZSU


 
    

----------------------------------------------------------------------

Subject: Re: Further thoughts on dual-band TNCs and cross-freq digipeating ...
From: Bob Bruninga <bruninga@nadn.navy.mil>
Date: Mon, 23 Oct 2000 08:50:51 -0400 (EDT)
X-Message-Number: 4

On Sun, 22 Oct 2000 WA8LMF1@aol.com wrote:

> I would be listening to the repeater's OUTPUT off-the-air from a location 
> about a mile from the repeater site.

Good luck.  There is so much audio processing in most repeaters that
packets through them usually do not decode...  Just a thought.  Test
before you buy, etc..

In any case, the decoding will never be as good as decoding it the first
time...

bob



----------------------------------------------------------------------

Subject: Re: Opinions on UIDIGI firmware for TNC2s?
From: Bob Bruninga <bruninga@nadn.navy.mil>
Date: Mon, 23 Oct 2000 09:12:37 -0400 (EDT)
X-Message-Number: 5

Now that we have a TRUE APRS'er writing specific DIGIPEATER code, I think
it should be the best type digipeater.  And since it is just an EPROM that
plugs into any TAPR-2 clone TNC, then it is trivial to do.  But I think



Read previous mail | Read next mail


 17.11.2026 08:44:39lGo back Go up