| |
ZL3AI > APRS 14.10.00 16:38l 180 Lines 7761 Bytes #999 (0) @ WW
BID : 33948_ZL3AI
Read: GUEST
Subj: TAPR Digest, Oct 11, 2/8
Path: DB0MRW<DB0ERF<DB0ROF<DB0SRS<DB0ZDF<DB0GE<LX0PAC<LX0HST<HA3PG<WB0TAX<
VK3BBS<VK2CZR<VK2IO<VK2GJB<ZL2TZE<ZL2TZE<ZL2WA<ZL2TCX<ZL2BAU<ZL3VML
Sent: 001012/1042Z @:ZL3VML.#80.NZL.OC #:43220 [Chch-NZ] FBB7.00g25 $:33948_ZL3
From: ZL3AI@ZL3VML.#80.NZL.OC
To : APRS@WW
However, the table that someone who started this thread posted is an excellent
start.
Let's see if we can work out some tracker standards for 70cm in the apparent
vacuum of any other group doing so.
Here's my proposal:
441.0500 - 9600 baud, using either G3RUH or other modulation standards.
Trackers, and backbone links, internet gateways, etc. Using DSP based modems,
major digis and backbones could have firmware allowing them to recognize and
digi both 9600 and 1200.
If 21st century digital signal processor based modems and AX.25 engine is still
too complex for we more enterprising imbedded processor hackers, then maybe we
could use 441.0375 or 441.0250 for 1200 baud packet, older TNCs without multi-
speed DSP based hardware that could recognize different data rates "on the
fly".
"He that would make his own liberty secure, must guard even his enemy from
oppression; for if he violates this duty, he establi
shes a precedent which will reach to himself." --Thomas Paine (1737-1809),
conclusion, Dissertation on First Principles of Gove
rnment, 1795
----------------------------------------------------------------------
Subject: Re: TCP/IP on MacAPRS
From: "Jim Gill" <gillj@uswest.net>
Date: Wed, 11 Oct 2000 00:49:19 -0500
X-Message-Number: 4
----- Original Message -----
From: "Dennis Hudson, N2LBT" <n2lbt@n2lbt.com>
Subject: [aprssig] Re: TCP/IP on MacAPRS
> If you are using OS 9.0+, or more specifically Open Transport 2.5.2+ you
> have to use the new and improved MacAPRS_OpnTpt version 3.4.5.
I have a new iMacDV SE (MacOS 9.0.4), and the Open Transport version works
great for me over TCP/IP. On my 4 box LAN, one of the boxes running Win98SE
has my ISDN terminal adapter, and Internet Connection Sharing enabled. I
set up my iMac to be a DHCP client for TCP/IP, and when I boot the iMac, it
acquires an (internal) IP number from the ICS box.
I then used the instructions in the previous message to make a "duplicate"
of the www.aprs.net:10151 port file, then set it to port 23. The caveat
mentioned about having to open, close, then open the port again works here,
too. But then it works great over Windows ICS! The files downloaded from
Rutgers were completely plug and play - the iMac uncompresses them
automatically after the download into the proper folder; you just run
MacAPRS_OpnTpt and you are on your way!
Now my only problem is having to decide if I want to register MacAPRS now,
in addition to the WinAPRS registration I already have. The speech and
other features built in to MacAPRS are great!!! I'm gonna have lots of fun
with this iMac. (This is not an invitation to open a Mac vs. Win war again
:-)
Jim Gill
N0RMO
Omaha, NE
----------------------------------------------------------------------
Subject: Re: Looking for inexpensive APRS tracker
From: Earl Needham <KD5XB@AMSAT.ORG>
Date: Tue, 10 Oct 2000 16:17:45 -0600
X-Message-Number: 5
At 02:46 AM 10/10/00 -0500, Mark Fellhauer blasted the following out into
the ether:
<snip>
>I hate to sound like a jerk, but I'd like to bring people into the hobby,
>and not turn them off. The TinyTrak has a place in APRS, but it's not a
>good solution for the novice APRS'er. 5 watts just doesn't cut it as a
>mobile tracker in all but the best of situations. Spend the extra
>$150 for a DR-135TP and you get so much more. 1200/9600
>capability. Ability to hook up a computer to the TNC for full Packet/APRS
>use. TX inhibit so you don't just QRM. Power to punch through ground
>clutter. Resale value.
For a fairly inexpensive radio with a good amount of power, I went
with a GE Phoenix SX from K4ABT. About $135.00, I think. Sixteen
channels, and I know someone's going to SCREAM at me over this, but it
outputs about 60 watts.
7 3
Earl
Earl Needham, KD5XB mailto:KD5XB@AMSAT.ORG
Clovis, New Mexico DM84jk N34d 25.446m W103d 12.700m (or so)
Pet peeve: breath is a noun, breathe is a verb (When you take a breath,
you breathe...)
----------------------------------------------------------------------
Subject: Re: Looking for inexpensive APRS tracker
From: Mark Fellhauer <sparkfel@primenet.com>
Date: Wed, 11 Oct 2000 03:09:04 -0500
X-Message-Number: 6
At 11:41 PM 10/10/00, RMckni8527@aol.com wrote:
>I say, "plug-n-play is here to stay" but you don't learn much if anything
>from it. Just how to plug in more sophisticated stuff. Go forth and wire,
>and build, and experiment, and learn. And probably save a few bucks, if
>that's important. The Ham that can fix and wire up stuff is far more
>valuable than someone who has to wait until Radio Shack opens up to buy a
>replacement cable.
I think you've missed the point. The original inquiry was a SIMPLE
low-cost tracker. The objective of this is not kit-building. When you buy
a kit - you know what you are getting into.
When someone wants a tracker, they want to get on the air and transmit
their location, not spend a weekend squinting over a PC board with burning
flux fumes in their eyes. Not everyone in this hobby joined into ham
radio to build kits or to kludge together something that may or may not be
reliable. I'm sorry, but the tenor of the "homebrew" people around here
is reaching about the same level of zeal as the pro-code crowd. It's the
attitiude of "Why when I was a kid I built my own radio - we couldn't
afford tubes so we made our own out of pop bottles and aluminum
foil..." "So you should have to, also!" It's elitist and it serves no
purpose other than push a certain segment of people away from this hobby.
Your words: "The Ham that can fix and wire up stuff is far more
valuable than someone who has to wait until Radio Shack opens up to buy a
replacement cable."
I think I'm gonna print that up and make banner out of it. Maybe post it
at the next SEARC meeting. Of course I'll give you proper credit for the
quote.
That is pretty hateful stuff, sir, and shameful. Having been the Vice
President of a large amatuer radio club, the person I considered a most
valuable asset to that club, did not carry an HT on his hip, did not spend
his hours in CW contests, did not do APRS, and did not lead group
kitbuilding sessions. He spent his time bringing people into the club, and
worked on bringing publicity to, and promoting ham radio. I will not name
this person, but the ARRL named him "Ham of the Year" a few years back.
Your words: "just go out a buy your way into the hobby" More
derisiveness, More I'm better than you are. I'm sorry that you feel
slighted because other people have different ideas of fun than you. Some
people here aren't good at soldering, or may even have some kind of
disability that makes soldering more than a few big connections
impossible. One fine kitbuilder I know can't do it anymore because his
hands are CRIPPLED WITH ARTHRITIS. He was once a fine guitar player too,
and could hammer out code at a blazing speed. (I hope you feel stupid
now). Some of the brightest people I know are the least mechanically
adept.
Some people actually may have worked hard, saved their money, and
planned. Then went out and bought a Vertex VX-3000 brand new, and got a
brand new KPC-3+, and then wired it all to a brand new Garmin
TrackPak. Finished it off with a fancy brand new Diamond antenna and one
of them spiffy pre-made coax harnesses. Horror of horrors, to top it off,
they waited till Radio Shack opened up and bought a 12 foot RS-232 cable
there, so they could interface it all to a brand new laptop
computer. Gheez! Buying their way into the hobby...
I won't even go into the people who are trying to use APRS for Search &
Read previous mail | Read next mail
| |