OpenBCM V1.13 (Linux)

Packet Radio Mailbox

DB0FHN

[JN59NK Nuernberg]

 Login: GUEST





  
ZL3AI  > APRS     14.10.00 16:37l 224 Lines 7813 Bytes #999 (0) @ WW
BID : 33957_ZL3AI
Read: GUEST
Subj: TAPR Digest, Oct 11, 6/8
Path: DB0MRW<DB0ERF<DB0ROF<DB0SRS<DB0ZDF<DB0GE<LX0PAC<LX0HST<HA3PG<WB0TAX<
      VK3BBS<VK2CZR<VK2GJB<ZL2TZE<ZL2TZE<ZL2WA<ZL2TCX<ZL2BAU<ZL3VML
Sent: 001012/1055Z @:ZL3VML.#80.NZL.OC #:43225 [Chch-NZ] FBB7.00g25 $:33957_ZL3
From: ZL3AI@ZL3VML.#80.NZL.OC
To  : APRS@WW


If truly ham radio is to be considered a emergency service, that Radio Shack
might be closed during a emergency. Then, one will have to improvise. *This*
I'm sure is what the poster was referring to.

Chill out.

-Jeff

---
You are currently subscribed to aprssig as: panderson@centerpartners.com
To unsubscribe send a blank email to leave-aprssig-18700I@lists.tapr.org
Questions regarding the SIG go to the SIG administrator: wa1lou@tapr.org

----------------------------------------------------------------------

Subject: Re: Looking for inexpensive APRS tracker
From: "Mike Yetsko" <myetsko@insydesw.com>
Date: Wed, 11 Oct 2000 12:59:21 -0400
X-Message-Number: 21

> > >Go forth and wire,
> > >and build, and experiment, and learn.  And probably save a few
bucks, if
> > >that's important.  The Ham that can fix and wire up stuff is far
more
> > >valuable than someone who has to wait until Radio Shack opens up to
buy a
> > >replacement cable.
>
> > I think you've missed the point.  The original inquiry was a SIMPLE
> > low-cost tracker.  The objective of this is not kit-building.  When
you
> buy
> > a kit - you know what you are getting into.
>
> He was talking about a TinyTrack? About as simple as they get plus a
> gez-whiz
> GUI config utility. Best of both worlds.


While I agree, I have to say that sometimes we all miss the obvious.  We
read the questions sometimes in the way we would like to answer, not
the way it was asked.

I know in my case right now, I have a TripMate sitting there unused.  I
want
to do something with it.  And I DON'T want to build another project
right now.
And it's not that I don't want to build.  I've recently built a K2, then
added
three options, and I've build 2 PIC projects and one Z8+ project (all
from
scratch).  I currently have two hot partials on my plate, so building
ANYTHING
right now is out of the question.

So right now I can fully empathise with someone not wanting to 'build'
another project.

Mike




----------------------------------------------------------------------

Subject: Re: Balloon Race
From: K5QQ@aol.com
Date: Wed, 11 Oct 2000 13:22:27 EDT
X-Message-Number: 22

In a message dated 10/11/2000 10:28:10 AM Mountain Daylight Time, 
k4hg@tapr.org writes:

> The Americas Challenge balloon race is well underway, though it looks 
>  like perhaps half of the entrants never got airborne (or their trackers 
>  are defunct). You can follow the action at a special web page on findu:
>  
>  http://www.findu.com/cgi-bin/aibf.cgi
>  
>  This is a very cool use of APRS!
>  
>  Steve K4HG

Thanks to Steve as his server is one of the key ingredients to making this 
all possible!!!

Yes, we filled last night and because of the vast uncertainty of the Weather, 
13 of the 25 dropped out at that time.  

Of the remaining 12, 7 lifted off and were light enough to get out of the 
local southerly winds and into Northerly winds aloft.   Their speeds were in 
the 25-35 mile range in the fist hour.  3 Lifted off but apparently opted for 
the heavier ballast option and thus drifted Southerly in the ground winds 
very slow speeds.  They turned later this morning and now those ten have now 
grouped together on a line almost 100 miles long, all North of Dodge Kansas.  
7 are coming thru the I Gate of George, N0ZED-5, in Denver. 1 is coming thru 
Jimmy's, KB5WIO-7, IGate in Amarillo.  Two are still in radio contact with 
the local digipeater here in Albuquerque, a direct range of 352 Miles!  But 
clearly without the IGate and the support of hams through out America, these 
reports will not be received here at N5B!

Finally, one of the last two balloons is now in the air and supposedly the 
second one is due to launch sometime this morning.   Unfortunately they have 
the tracker box in a support vehicle or something and so the GPS loses lock 
from time to time and they show up in Earl's back yard - Clovis NM.

Thanks to all of you for making this work just GREAT.  let's hope it 
continues.

A Very Special Thanks to Brent, KH2Z, for his support in some special data 
recovery programming and almost instantaneous APRS+ technical assistance over 
the last several months.

Thanks to Bob Bruniniga, WB4APR, for helping to join in reviewing the path 
planning decision criteria as well as valuable kbitizing.

And, just so everyone knows this was a 'Big Three' operation, thanks to Keith 
Sproul, WU2Z who was here for the Fiesta and served as part of the checkout 
and deployment crew.

Adios all and thanks again to all

Jim Baremore  K5QQ
Tech Suppport Team
WWW.Explorium.org

----------------------------------------------------------------------

Subject: Re: Looking for inexpensive APRS tracker
From: "Smith, Tim" <n1btq@ne.mediaone.net>
Date: Wed, 11 Oct 2000 13:35:42 -0400
X-Message-Number: 23

Peter,

Please excuse some of the more passionate zealots on the sig.  However don't
let it discourage you as people's opinions are like certain body
parts...everyone's got 'em...some are productive and some are not.  Take
each one with a grain of salt and stick it out.  Don't consider it a
war....it's what I consider a healthy discussion of all pros and cons no
matter what the tone of each message is.

God luck with your tracking endeavors but hang around...it's still one of
the best places to learn and exchange ideas.

73,

Tim N1BTQ

-----Original Message-----
From: bounce-aprssig-17998@lists.tapr.org
[mailto:bounce-aprssig-17998@lists.tapr.org]On Behalf Of Peter Anderson
Sent: Wednesday, October 11, 2000 12:48 PM
To: TAPR APRS Special Interest Group
Subject: [aprssig] Re: Looking for inexpensive APRS tracker


I was just looking for information on the best way for trackers and to have
people email me OFF the list.  That is why I am reluctant to place any
questions here to this list as I have had problems in starting this email
war before.  this list is, in my feeling, not for those of us who are just
starting out as APRS hobbyists.  This is more of a technical list not a
beginners list.  In the future I will take my mail elsewhere to avoid this
issue on this list.

Thank You

Peter, N0WRE

-----Original Message-----
From: Jeff King [mailto:jeff@aerodata.net]
Sent: Wednesday, October 11, 2000 10:06 AM
To: TAPR APRS Special Interest Group
Cc: TAPR APRS Special Interest Group; aprssig@tapr.org;
RMckni8527@aol.com
Subject: [aprssig] Re: Looking for inexpensive APRS tracker




Mark Fellhauer wrote:

> At 11:41 PM 10/10/00, RMckni8527@aol.com wrote:

> >Go forth and wire,
> >and build, and experiment, and learn.  And probably save a few bucks, if
> >that's important.  The Ham that can fix and wire up stuff is far more
> >valuable than someone who has to wait until Radio Shack opens up to buy a
> >replacement cable.

> I think you've missed the point.  The original inquiry was a SIMPLE
> low-cost tracker.  The objective of this is not kit-building.  When you
buy
> a kit - you know what you are getting into.

He was talking about a TinyTrack? About as simple as they get plus a
gez-whiz
GUI config utility. Best of both worlds.

> When someone wants a tracker, they want to get on the air and transmit
> their location, not spend a weekend squinting over a PC board with burning
> flux fumes in their eyes.

A 16 year old built a TinyTrak in less then one hour with no help. I'm sure
he or
others would be happy to help out soldering a extremely simple PCB for a
small fee.


> I'm sorry, but the tenor of the "homebrew" people around here
> is reaching about the same level of zeal as the pro-code crowd.

This is off topic, but to compare the luddinite "pro-code" crowd to
homebrewers,
frankly is insulting. I think you owe a apology on this one. I'm not
suggesting
homebrewing makes sense all the time, but it's on a entirely different level



Read previous mail | Read next mail


 17.11.2026 14:01:32lGo back Go up