| |
ZL3AI > APRS 14.10.00 21:04l 199 Lines 7557 Bytes #999 (0) @ WW
BID : 33962_ZL3AI
Read: GUEST
Subj: TAPR Digest, Oct 11, 8/8
Path: DB0MRW<DB0ERF<DB0SAW<DB0MVP<DB0MAR<DB0IL<OZ5BBS<OZ4PAC<OZ2DIZ<7M3TJZ<
LZ3NP<ZS6RO<ZL3VML
Sent: 001012/1058Z @:ZL3VML.#80.NZL.OC #:43226 [Chch-NZ] FBB7.00g25 $:33962_ZL3
From: ZL3AI@ZL3VML.#80.NZL.OC
To : APRS@WW
did it ... I think I went to the main page and clicked something like
"downloads" It brought me to a FTP page that had various languages, I then
clicked ENGLISH and that brought me to where all the goodies were (I think)
ByTheWay, I'm *thinking* about getting a D700 (that's why I was looking for
the manual)
Richard Amirault N1JDU Boston, MA, USA
ramirault@erols.com "Go Fly A Kite"
http:// www.erols.com/ramirault
----- Original Message -----
From: "Smith, Tim" <n1btq@ne.mediaone.net>
To: "TAPR APRS Special Interest Group" <aprssig@lists.tapr.org>
Sent: Wednesday, October 11, 2000 4:36 PM
Subject: [aprssig] Kenwood D7AG Manual?
> I'm unable to get to Kenwoods FTP site to download a user manual. If
> someone has one handy I'd be most grateful if you could anonymous FTP it
to
> nonebtq.ne.mediaone.net.
----------------------------------------------------------------------
Subject: An Apology
From: Mark Fellhauer <sparkfel@primenet.com>
Date: Wed, 11 Oct 2000 20:00:01 -0500
X-Message-Number: 34
Several people from the BDL (Byon Defense league) have emailed me and
demanded a public apology for my remarks about the TinyTrak kit. Most of
the comments they attributed to me I never made. And the error had been
corrected by several people already on the SIG. But people insisted, so
here goes:
I did imply that the Byonics TinyTrak does not incorporate a TX-hold off
function. I was incorrect. This is an option that can be enabled as part
of the kit. The person who showed me the dozen or so TinyTraks he had made
and I had a communications break down. I asked him if they would hold off
transmitting on a busy channel. He said they didn't. More accurately, he
hadn't wired them up to. I mistook that to mean that they couldn't.
So to set the record straight:
The Byonics TinyTrak is designed to hold off transmitting on a busy
channel. The design of this hold-off circuit is quite good.
The TinyTrak kit is a very nice kit. I'm sorry If I gave anyone the
impression that I thought it wasn't. I never did think that, and I'm even
more impressed with it now that I've downloaded and looked at the docs. I
think this kit should be promoted more. I may even order one myself.
I am however shocked by several of the BDL (Byon Defense League)
people. I got a number of private emails in defense of Byon that
consisted mainly of attacks on the character of Bob Bruninga. Most
odd. Perhaps someone can fill me in on that dynamic. But off the SIG
please. BDL (Byon Defense League) affiliates and agents need not reply.
73,
Mark
KC7BXS
----------------------------------------------------------------------
Subject: Re: Gas Balloons are Off and APRSing!!!
From: "Jim Gill" <gillj@uswest.net>
Date: Wed, 11 Oct 2000 21:02:44 -0500
X-Message-Number: 35
----- Original Message -----
From: "Brian P. Mileshosky" <n5zgt@swcp.com>
Subject: [aprssig] Gas Balloons are Off and APRSing!!!
> After three days of bad weather (high winds, rain, etc.) the gas
> balloons competing in the America's Challenge distance competition are
> launching at the present time from the International Balloon Fiesta field
in
> Albuquerque, New Mexico!
Brian and others,
This has been exciting to watch. Great job one and all!
Any idea what freqs (ham or aircraft) these balloons will typically be on
for voice? I've tried typical simplex freqs in the ham band and unable to
raise anyone, and I've scanned around the local approach freqs and nothing
there either to monitor.
There's five balloons in close proximity to Omaha right now with the closest
to pass 10 miles from my home. Sure would be nice to see them during the
day, though! Any beacon lights operating to catch of glimpse of with
Binoculars?
Thanks for the fun.
73,
Jim N0RMO
Omaha NE
----------------------------------------------------------------------
Subject: Kenwood manual download page
From: "Richard Amirault" <ramirault@erols.com>
Date: Wed, 11 Oct 2000 22:41:28 -0400
X-Message-Number: 36
In case anyone need it, this is where the Kenwood on-line manuals (in
English) are:
http://216.133.235.165/Amateur/Current%20Instruction%20Manuals/
----------------------------------------------------------------------
Subject: RE: Looking for inexpensive APRS tracker
From: Mark Fellhauer <sparkfel@primenet.com>
Date: Wed, 11 Oct 2000 22:03:33 -0500
X-Message-Number: 37
At 05:58 AM 10/11/00, Smith, Tim wrote:
> If you can't hit a digi 9 miles away with your 5 watt
>installation it sounds like you have some pretty deaf or low elevation
>digi's out there.
That's the case in many parts of the country. And I have to apologize for
the low antenna height of the Sioux Falls Digi, as that's my fault.
I first visited Sioux Falls SD in the mid 1990's and was shocked to find no
APRS activity in the state, whatsoever. In 1997 while visiting Sioux
Falls (Groomsman in KB0WSV's Wedding) I gave a demonstration to the Sioux
Empire ARC on APRS, and it was the first time many club members had ever
heard of it. Also did a demo about A0-27. After the wedding ceremonies I
returned to Phoenix. A year later I accepted a position at Gateway
Computers - Sioux Falls Mixed-Use Facility. And moved on up. Still no
APRS activity. This was untenable.
Despite empassioned pleas to local hams and communications companies for
tower space - none was offered. So I was on my own. My first
digipeater was nothing more than a few sections of RS tower, an ADI HT with
an amp, KPC-3, and a $35 el cheapo antenna bought at Ft Tuthill. Results
were less than stellar. Steve (KB0WSV) had a 25 foot aluminum tower
unplanted in his backyard (my backyard too, as his house has an attached
apt) and offered it up as a DIGI tower. But his schedule didn't allow for
him to plant it. I asked him to mark the spot where he wanted the
tower. He did. In October of 1998 I went out with a post-hole digger (and
not the gas powered kind) and dug the foundation for the tower. We formed
up and poured the foundation a few weekends later. 25 foot tower and 10
foot section of mast - gave us about 35 feet of elevation (and we are in a
high spot). The Sioux Falls Digi went online fulltime - Thanksgiving Day,
1998. It was good enough for trackers around town and we could pick up
some truckers and travellers on the local highways.
Two years of trying to get a higer location has failed. But we continued
to make improvements on the Digi. We added a full time I-gate, scrapped
the HT in favor of a real radio, 6 db Diamond Antenna, a KPC-3 Plus with
the most current firmware, a real gas-discharge lightning arrestor, and a
weather station. Most of which was paid for out of my pocket. The
Diamond antenna really helped.
On July 11th, 2000, several tornadoes rumbled through the area along with
90+ mile per hour straight line winds. Sometime while I was hiding in the
basement, the tower folder (I don't feel too bad because that storm took
out some mighty sturdy towers that were well guyed). The Diamond antenna
was shattered.
Currently the DIGI is still up. A bandaged antenna sits about 10 feet off
the ground. The I-gate is currently offline (for obvious reasons). With
one hard freeze already. I don't know when another tower will go up.
73,
Mark
KC7BXS
(just a young punk schmuck who hasn't paid his dues to this hobby, as one
person put it)
---
END OF DIGEST
Read previous mail | Read next mail
| |