OpenBCM V1.13 (Linux)

Packet Radio Mailbox

DB0FHN

[JN59NK Nuernberg]

 Login: GUEST





  
ZL3AI  > APRS     14.10.00 16:37l 195 Lines 7779 Bytes #999 (0) @ WW
BID : 33952_ZL3AI
Read: GUEST
Subj: TAPR Digest, Oct 11, 4/8
Path: DB0MRW<DB0ERF<DB0ROF<DB0AIS<DB0ZDF<DB0GE<LX0PAC<LX0HST<HA3PG<WB0TAX<
      VK3BBS<VK2CZR<VK2GJB<ZL2TZE<ZL2TZE<ZL2WA<ZL2TCX<ZL2BAU<ZL3VML
Sent: 001012/1050Z @:ZL3VML.#80.NZL.OC #:43223 [Chch-NZ] FBB7.00g25 $:33952_ZL3
From: ZL3AI@ZL3VML.#80.NZL.OC
To  : APRS@WW


TMD-700 running tnc in band A, for the citadel (APRS)
Band B simplex 146.580. In band B I was hearing stations that were
transmitting on 145.670. One sattion is 1/2 mile away (full scale on meter)
the other station was 5 miles away (1/2 scale on meter).
Switched APRS to band B and the simplex freq. to band A and it stopped.
Also removed the aprs freq in band A and listened to band B thinking it
thinking it was a harmonic but the problem still occured.
Is this a bug in the radio?
A bad radio?
Any ideas?
thanks
Dave k7iou


----------------------------------------------------------------------

Subject: rand mcnally
From: "k7iou" <k7iou@flash.net>
Date: Wed, 11 Oct 2000 06:17:29 -0700
X-Message-Number: 12

Just a reminder. Anyone ordering from www.randmcnally.com don't forget to
fill in the on-line registration first, to receive a 20% on-line discount
with your first order.
I did this when I ordered the GPS receiver. Shipped with tax it was $74.
Dave k7iou


----------------------------------------------------------------------

Subject: Re: Looking for inexpensive APRS tracker
From: David Locke <dlocke@cityofaltus.org>
Date: Wed, 11 Oct 2000 08:26:43 -0500
X-Message-Number: 13

Again I say tiger tronics. I don't think you will get by any simpler or cheaper.

73,
Dave KC5SII


----------------------------------------------------------------------

Subject: No track, Notune OMNI Igates
From: Bob Bruninga <bruninga@nadn.navy.mil>
Date: Wed, 11 Oct 2000 11:35:36 -0400 (EDT)
X-Message-Number: 14

We can MONITOR many of our satellites at ANYtime form ANYwhere here on the
internet, AO27, UO14, UO11, PACSATS*, OPAL, SO35, SEDSAT  voice, or
digital. Everything exists and is proven capable of this....  All we need
is to get around-to-it....  First digital:

TELNET to 199.227.86.221 to see the stream of packets being monitored
WORLDWIDE from as many as 70 or more full time internet linked IGates.
(Anyone with a PC and a radio can be an IGate).  To see where all these
IGates are, Live, go to www.aprs.net and pick the WORLD map and look for
the yellow TCPIP stations.

Now all we need to see satellites at any time from anywhere is for a few
of these 70 stations or anyone else to connect a spare radio and TNC to
their serial port and tune it to their favorite satellite downlink.
Hook it to an OMNI 20" whip antenna and thats IT!  DONE!

In the past, no one was satisfied with OMNI whip PACSAT reception because
it only captures the central 1/4 of all pass opportunities, but that is
because they are operating "alone".  If these OMNI stations simply SHARE
their output with each other via a port like 199.227.86.221 then they all
get to see every packet that ANY of them hears.  THus they get EVERYTHING,
including beyond their own horizon!  And everyone on the planet can
monitor it at that same TELNET port.  Thanks to K4HG for this!

VOICE:  SImilarly for the single channel VOICE satellites. There are many
free voice-over-internet conference capabilities (IPHONE, IVISIT,
FIRETALK, SPEAKFREELY, etc...) that can pool together multiple feeds of
AUDIO from anywhere on the planet from anyone with a radio and a sound
card.  ANYONE then, anywhere, can then listen on the INTERNET to the
downlink from anywhere.  Due to delays, a DUPE filter or traffic-cop
software will be needed to feed only the best sounding audio at any given
time...

YES, TO WORK the satellites you still need to be a HAM with a radio.  But
by linking together multiple satellite receive sites, we can distribute
the downlink of these satellites to everyone that is interested outside of
the current footprint to leverage all kinds of neat applications.

Then our satellites become MUCH MORE useful to people in remote areas that
need to transmnit back to civilization from a remote location..  To see
the omni-notrack-no-tune concept, see the bottom 1/3rd of::

See http://web.usna.navy.mil/~bruninga/astars.html

de WB4APR, Bob

* FOR the PACSATS or any satelite with a 100% dutycycle 9600 baud or
greater downlink, it is best to have a front end filter to only pass the
UI or BEACON packets to the internet and not all the bulk data which is
already protected by the PACSAT protocol.  This prevents OVERLOAD on the
part of the APRServe dupe-checker which must monitor the streams from all
multiple sites simultaneously so that only one copy is actually
distributed.



----------------------------------------------------------------------

Subject: Re: Looking for inexpensive APRS tracker
From: Jeff King <jeff@aerodata.net>
Date: Wed, 11 Oct 2000 12:06:14 -0400
X-Message-Number: 15



Mark Fellhauer wrote:

> At 11:41 PM 10/10/00, RMckni8527@aol.com wrote:

> >Go forth and wire,
> >and build, and experiment, and learn.  And probably save a few bucks, if
> >that's important.  The Ham that can fix and wire up stuff is far more
> >valuable than someone who has to wait until Radio Shack opens up to buy a
> >replacement cable.

> I think you've missed the point.  The original inquiry was a SIMPLE
> low-cost tracker.  The objective of this is not kit-building.  When you buy
> a kit - you know what you are getting into.

He was talking about a TinyTrack? About as simple as they get plus a gez-whiz
GUI config utility. Best of both worlds.

> When someone wants a tracker, they want to get on the air and transmit
> their location, not spend a weekend squinting over a PC board with burning
> flux fumes in their eyes. 

A 16 year old built a TinyTrak in less then one hour with no help. I'm sure he
or 
others would be happy to help out soldering a extremely simple PCB for a small
fee. 


> I'm sorry, but the tenor of the "homebrew" people around here
> is reaching about the same level of zeal as the pro-code crowd.

This is off topic, but to compare the luddinite "pro-code" crowd to homebrewers,
frankly is insulting. I think you owe a apology on this one. I'm not suggesting
homebrewing makes sense all the time, but it's on a entirely different level
thenrabid pro-coders. The first clearly is a marketable skill, the later even
oldtime ship to shore stations have now been moving away from.


> Your words:  "The Ham that can fix and wire up stuff is far more
> valuable than someone who has to wait until Radio Shack opens up to buy a
> replacement cable."
> 
> I think I'm gonna print that up and make banner out of it.  Maybe post it
> at the next SEARC meeting.   Of course I'll give you proper credit for the
> quote.

I hope your serious as its one of the better quotes on the SIG in some time.
If truly ham radio is to be considered a emergency service, that Radio Shack
might be closed during a emergency. Then, one will have to improvise. *This*
I'm sure is what the poster was referring to.

Chill out.

-Jeff

----------------------------------------------------------------------

Subject: APRS Violates Laws of Physics
From: Bob Bruninga <bruninga@nadn.navy.mil>
Date: Wed, 11 Oct 2000 12:07:00 -0400 (EDT)
X-Message-Number: 16

Mark F. said:.....  From my unscientific tests I have found that
> >going from five watts with an HT to a 15 watt mobile quadruples the
> >number of successful digipeats in a typical RF environment.

NEW RULES FOR NEW TOOLS (APRS):  Classically, everyone learns that it
takes 4 times the power to double your range.  TRUE.  A law of physics.
 
But that assumes you want to talk from point A to B.  With APRS generic
digipeating, when you don't care who or what digipeats you, a 4 times
increase in power, will double your range, but actually COVER 4 times as
much AREA.  Thus you DO get a 4 times better probability that a
digi or other station somewhere heard your packet and will digipeate it!

So for APRS (generic digipeating) the equation is linear (on average)!




Read previous mail | Read next mail


 17.11.2026 14:09:34lGo back Go up