| |
EB2DVY > PSK31 05.07.00 21:01l 397 Lines 13789 Bytes #-9507 (0) @ WW.SYD.NSW
BID : 1313-EB2DVY
Read: GUEST
Subj: PSK31 Digest V1 #441
Path: OE1XAB<OE3XPR<OE6XAR<OE5XBL<DB0RGB<DB0SL<DB0FSG<I4UKI<IK2HDG<IK1MAP<
I1YLM<IK1ZNW<LW9EOC<LW2EIQ<EA2URV
Sent: 000701/2030Z @:EA2URV.EABI.ESP.EU #:62458 [URV-ABRA Bilbao] $:1313-EB2DVY
From: EB2DVY@EA2URV.EABI.ESP.EU
To : PSK31@WW.SYD.NSW.AUS.OC
De: Psk31 Digest <owner-psk31@aintel.bi.ehu.es>
Para: <psk31-digest@bipt106.bi.ehu.es>
Asunto: Psk31 Digest V1 #441
Fecha: sßbado 1 de julio de 2000 4:27
Psk31 Digest Saturday, July 1 2000 Volume 01 : Number 441
In this issue:
[psk31] Yaesu FT1000
Re: [psk31] Yaesu FT1000
Re: [psk31] Sound Blaster 16 IDE PnP card; model CT2940
[psk31] wiring for FT920
[psk31] twpsk version 1.0
[psk31] twpsk version 1.0 URL
[psk31] ts570
Re: [psk31] Sound Blaster 16 IDE PnP card; model CT2940
Re: [psk31] Disable Windows Sounds!!!
Re: [psk31] IF I SEE IT I HEAR IT
Re: [psk31] MFJ PSK31
See the end of the digest for information about psk31-digest
----------------------------------------------------------------------
Date: Fri, 30 Jun 2000 02:26:27 EDT
From: KA8FJC@aol.com
Subject: [psk31] Yaesu FT1000
Hello fellow Warblers:
I put my rig on the air last week and it works wonderfully. Now I tried
to hook up a rig at work, a FT1000 and it seems the packet rear panel 5 pin
socket works good on Recv but transmit I need to select Packet on the front
panel which allows only LSB or FM to be selected. Has any one else had this
problem and how did you solve it? I bet here is a simple answer but I can't
seem to come up with it.
I enjoy all the articles. The one comment about not being offended at
comment from other operators is right on the mark. I welcome ANY comments on
signal etc. Only with input from other hams can we be aware of many problems.
Moses Gingerich
KA8FJC
Waxhaw NC
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
to unsuscribe from the list send to majordomo@aintel.bi.ehu.es a message
with a text line as follow: unsubscribe psk31 or unsubscribe psk31-digest
More instructions on PSK31 Webpage: http://aintel.bi.ehu.es/psk31.html
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
------------------------------
Date: Fri, 30 Jun 2000 09:57:18 -0400
From: Jim Lynch <jwl@sgi.com>
Subject: Re: [psk31] Yaesu FT1000
I use a FT-990 which has the same problem. Except it doesn't seem to be
a problem. I receive and transmit just fine. I don't think that psk
can be "upside down" like rtty, or it doesn't seem so. The only
disadvantage I see is that I have to set the dial to 14073 so that I see
signals from 2k (AF) to 3k as 14071 to 14070. Takes a bit of getting
used to, but then I don't care much exactly what frequency I'm on yet.
In reality, I set my dial to about 14072.5.
Jim. de k4gvo
KA8FJC@aol.com wrote:
>
> Hello fellow Warblers:
>
> I put my rig on the air last week and it works wonderfully. Now I tried
> to hook up a rig at work, a FT1000 and it seems the packet rear panel 5 pin
> socket works good on Recv but transmit I need to select Packet on the front
> panel which allows only LSB or FM to be selected. Has any one else had this
> problem and how did you solve it? I bet here is a simple answer but I can't
> seem to come up with it.
> I enjoy all the articles. The one comment about not being offended at
> comment from other operators is right on the mark. I welcome ANY comments on
> signal etc. Only with input from other hams can we be aware of many problems.
>
> Moses Gingerich
> KA8FJC
> Waxhaw NC
>
> +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> to unsuscribe from the list send to majordomo@aintel.bi.ehu.es a message
> with a text line as follow: unsubscribe psk31 or unsubscribe psk31-digest
>
> More instructions on PSK31 Webpage: http://aintel.bi.ehu.es/psk31.html
> +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
to unsuscribe from the list send to majordomo@aintel.bi.ehu.es a message
with a text line as follow: unsubscribe psk31 or unsubscribe psk31-digest
More instructions on PSK31 Webpage: http://aintel.bi.ehu.es/psk31.html
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
------------------------------
Date: Fri, 30 Jun 2000 10:25:53 -0400
From: Vince <wa2rsx@worldnet.att.net>
Subject: Re: [psk31] Sound Blaster 16 IDE PnP card; model CT2940
Hi Bob:
Thanks for ur info/input.
I have received so many replies directly to my INBOX and all have brought me to
the following conclusion(s):
If truly PnP, WIN95 should find the appropriate device driver on the WIN95
CDrom for the CT2940.
The www.creativelabs site should (and it has) lead me to the required device
driver. I did find a cross ref table that I.D.ed the CT2940 as a IDE PnP card
Right now, this shack is a real mess, but when I get the chance I shall install
the CT2940 SB16 card and see what happens.
Thanks again, Bob, and all the others that have offered good advice.
73s es HAVE FUN !
~Vince~
WA2RSX, permanently on IOTA NA-026.
Robert Lay wrote:
> Dear Vince,
>
> The model CT2940 does not ring a bell, but I would be surprised if Win 95
> does not have a driver for that card. Have you installed it and told Win 95
> to find a driver for it? If you haven't, then you should try that. The
> Creative Labs driver situation is murky at best.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
to unsuscribe from the list send to majordomo@aintel.bi.ehu.es a message
with a text line as follow: unsubscribe psk31 or unsubscribe psk31-digest
More instructions on PSK31 Webpage: http://aintel.bi.ehu.es/psk31.html
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
------------------------------
Date: Fri, 30 Jun 2000 11:12:11 -0400
From: "Phil Mohon" <ku4rk@naxs.com>
Subject: [psk31] wiring for FT920
I need to find out the wiring for the Yaesu FT-920. I've got the RX but now
TX. I would like to use the mic con. Using the data plug already but could
change back and forth if I had wiring for that to.
Thanks and 73
Phil , KU4RK
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
to unsuscribe from the list send to majordomo@aintel.bi.ehu.es a message
with a text line as follow: unsubscribe psk31 or unsubscribe psk31-digest
More instructions on PSK31 Webpage: http://aintel.bi.ehu.es/psk31.html
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
------------------------------
Date: Fri, 30 Jun 2000 11:46:54 -0400
From: "Williams, Ted" <ted@Bluestone.com>
Subject: [psk31] twpsk version 1.0
Hi,
Hansi and I are pleased to announce the release of twpsk version 1.0,
a Linux application for PSK31 using the Lesstif toolkit.
It is available at -
http://metalab.unc.edu/pub/Linux/ham/twpsk-1.0.tar.gz
and will also be at Hansi's web site.
http://wwwcip.informatik.uni-erlangen.de/~hsreiser/hamradio/
73,
Ted Williams - WA0EIR
ted@bluestone.com
Bluestone Software Voice (856) 727-4600 ext. 1180
1000 Briggs Road Fax (856) 778-4925
Mt. Laurel, N.J.
08054
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
to unsuscribe from the list send to majordomo@aintel.bi.ehu.es a message
with a text line as follow: unsubscribe psk31 or unsubscribe psk31-digest
More instructions on PSK31 Webpage: http://aintel.bi.ehu.es/psk31.html
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
------------------------------
Date: Fri, 30 Jun 2000 17:17:51 -0400
From: "Williams, Ted" <ted@Bluestone.com>
Subject: [psk31] twpsk version 1.0 URL
Sorry, I miss typed the URL for twpsk - forgot the apps directory.
It should have been
http://metalab.unc.edu/pub/Linux/apps/ham/twpsk-1.0.tar.gz
Ted - WA0EIR
ted@bluestone.com
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
to unsuscribe from the list send to majordomo@aintel.bi.ehu.es a message
with a text line as follow: unsubscribe psk31 or unsubscribe psk31-digest
More instructions on PSK31 Webpage: http://aintel.bi.ehu.es/psk31.html
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
------------------------------
Date: Fri, 30 Jun 2000 17:15:00 EDT
From: Larryw0pya@aol.com
Subject: [psk31] ts570
First, this is my first send message. Hope it goes correct. some time back
their was a bunch of talk on hooking up a ts570 to the sound card. anyone
have a list of the mail or better still the pin wiring.
Larry w0pya
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
to unsuscribe from the list send to majordomo@aintel.bi.ehu.es a message
with a text line as follow: unsubscribe psk31 or unsubscribe psk31-digest
More instructions on PSK31 Webpage: http://aintel.bi.ehu.es/psk31.html
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
------------------------------
Date: Fri, 30 Jun 2000 15:03:08 -0700
From: "Dick Hughes" <rahughes@worldnet.att.net>
Subject: Re: [psk31] Sound Blaster 16 IDE PnP card; model CT2940
Vince -
Also note that the device does not have to be PNP in order to make use of
the Windows supplied drivers.
Dick Hughes - W6CCD
- ----- Original Message -----
From: "Vince" <wa2rsx@worldnet.att.net>
To: "Robert Lay" <w9dmk@crosslink.net>
Cc: "PSk31 Listserver" <psk31@bipt106.bi.ehu.es>;
<RadioDataDecoding@egroups.com>; <Hellschreiber@egroups.com>;
<hamlogger@egroups.com>; <Zakanaka@egroups.com>
Sent: Friday, June 30, 2000 7:25 AM
Subject: Re: [psk31] Sound Blaster 16 IDE PnP card; model CT2940
> Hi Bob:
>
> Thanks for ur info/input.
> I have received so many replies directly to my INBOX and all have brought
me to
> the following conclusion(s):
>
> If truly PnP, WIN95 should find the appropriate device driver on the WIN95
> CDrom for the CT2940.
> The www.creativelabs site should (and it has) lead me to the required
device
> driver. I did find a cross ref table that I.D.ed the CT2940 as a IDE PnP
card
> Right now, this shack is a real mess, but when I get the chance I shall
install
> the CT2940 SB16 card and see what happens.
>
> Thanks again, Bob, and all the others that have offered good advice.
>
> 73s es HAVE FUN !
> ~Vince~
> WA2RSX, permanently on IOTA NA-026.
>
> Robert Lay wrote:
>
> > Dear Vince,
> >
> > The model CT2940 does not ring a bell, but I would be surprised if Win
95
> > does not have a driver for that card. Have you installed it and told Win
95
> > to find a driver for it? If you haven't, then you should try that. The
> > Creative Labs driver situation is murky at best.
>
>
> +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> to unsuscribe from the list send to majordomo@aintel.bi.ehu.es a message
> with a text line as follow: unsubscribe psk31 or unsubscribe psk31-digest
>
> More instructions on PSK31 Webpage: http://aintel.bi.ehu.es/psk31.html
> +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>
>
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
to unsuscribe from the list send to majordomo@aintel.bi.ehu.es a message
with a text line as follow: unsubscribe psk31 or unsubscribe psk31-digest
More instructions on PSK31 Webpage: http://aintel.bi.ehu.es/psk31.html
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
------------------------------
Date: Fri, 30 Jun 2000 19:08:42 -0400
From: "Bob Lewis" <aa4pb@erols.com>
Subject: Re: [psk31] Disable Windows Sounds!!!
Is it possible for Windows sounds to go out over top of the PSK signal
while the PSK program is in the Tx mode? If not then using PTT should
solve the problem.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
to unsuscribe from the list send to majordomo@aintel.bi.ehu.es a message
with a text line as follow: unsubscribe psk31 or unsubscribe psk31-digest
More instructions on PSK31 Webpage: http://aintel.bi.ehu.es/psk31.html
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
------------------------------
Date: Fri, 30 Jun 2000 19:30:32 -0400
From: "Bob Lewis" <aa4pb@erols.com>
Subject: Re: [psk31] IF I SEE IT I HEAR IT
One of the reasons that the PSK software copies signals that you can't
hear via the speaker or headset is that you are listening to approx. 3
Khz worth of noise along with the narrow, weak PSK signal. The
software is "listening" through a much narrower passband and "sees"
much less noise. It's the same effect (although more pronounced) as
when switching a narrow filter on a weak CW signal and the signal
appears to suddenly jump out at you. Same signal, less noise.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
to unsuscribe from the list send to majordomo@aintel.bi.ehu.es a message
with a text line as follow: unsubscribe psk31 or unsubscribe psk31-digest
More instructions on PSK31 Webpage: http://aintel.bi.ehu.es/psk31.html
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
------------------------------
Date: Fri, 30 Jun 2000 19:32:37 -0400
From: "Bob Lewis" <aa4pb@erols.com>
Subject: Re: [psk31] MFJ PSK31
> I contacted MFJ re: using their 20 meter ssb qrp rig on PSK31.
Frequency stability will be a major problem. You need either a crystal
controlled or a synthesized rig to have a chance of getting the
stability required for comfortable PSK31 operation.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
to unsuscribe from the list send to majordomo@aintel.bi.ehu.es a message
with a text line as follow: unsubscribe psk31 or unsubscribe psk31-digest
More instructions on PSK31 Webpage: http://aintel.bi.ehu.es/psk31.html
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
------------------------------
End of Psk31 Digest V1 #441
***************************
Read previous mail | Read next mail
| |
