| |
EB2DVY > PSK31 30.04.00 04:48l 206 Lines 6421 Bytes #-9580 (0) @ WW.SYD.NSW.
BID : 1154-EB2DVY
Read: GUEST
Subj: PSK31 Digest V1 #368
Path: OE1XAB<OE3XPR<OE3XBS<OE5XBR<OE2XUM<OE5XBL<DB0RGB<DB0MRW<OK0PKL<OK0PPR<
OK0PPL<OK0POK<OK0PAB<HA5OB<HA3PG<PP5BLU<VE3FJB<IK1ZNW<7M3TJZ<JO1ZQK<
JG1YGH<JN1ZGA<JL1ZBF<JN1ZSL<JO1GIY<JK1ZRW<EA5RQ<EA5VDR<ED3ZAF<EA2K<
EA1URR<EA1URM<EA2RCF<EA2G<EA2URV
Sent: 000427/2142Z @:EA2URV.EABI.ESP.EU #:54360 [URV-ABRA Bilbao] $:1154-EB2DVY
From: EB2DVY@EA2URV.EABI.ESP.EU
To : PSK31@WW.SYD.NSW.AUS.OC
De: Psk31 Digest <owner-psk31@aintel.bi.ehu.es>
Para: <psk31-digest@bipt106.bi.ehu.es>
Asunto: Psk31 Digest V1 #368
Fecha: jueves 20 de abril de 2000 9:58
Psk31 Digest Thursday, April 20 2000 Volume 01 : Number 368
In this issue:
Re: [psk31] Question relating to Digipan
[psk31] Fw: psk31
[psk31] PSK31 IMD readings
[psk31] [PSK31] RigBlaster
Re: [psk31] [PSK31] RigBlaster
[psk31] Re: [PSK31] Field Day
See the end of the digest for information about psk31-digest
----------------------------------------------------------------------
Date: Tue, 18 Apr 2000 21:36:56 -0500
From: Martin <rutherford.ulea@mcleodusa.net>
Subject: Re: [psk31] Question relating to Digipan
Hi Dean. As far as I know, Digipan uses RTS only. Other programs can
use DTS, but NOT Digipan.
Dean Wooldridge wrote:
>
> I just hooked up a Lectrokit PSK31 kit between my ICOM 725 and my PIII
> computer. Kit works great. Using Digipan, I cannot trigger transmit
> automatically. Using WinPSKSE, the software does trigger the radio to go
> into transmit mode. I am using DTR rather than RTS because RTS is in use
> controlling the radio itself (tuning, etc). I did go into SETUP and set
> COM1 and DID NOT check the RTS box. Must be something I'm doing as Digipan
> does everything else just fine. Any help would be appreciated.
>
> Dean Wooldridge (K5DMP)
> dean@medsweb.com
> 214-265-5100
>
- --
Cul8r
Martin Campbell rutherford.ulea@mcleodusa.net KB0HAE
------------------------------
Date: Tue, 18 Apr 2000 22:37:41 -0400
From: "Ernie Mills" <mills-owen@email.msn.com>
Subject: [psk31] Fw: psk31
Hello Reflector,
Sorry for the bandwidth but can not think of any other way to possibly
help Steve, AD6HT. Anybody reading this who is close to Los Angeles who can
accommodate this request, please contact Steve at the e-mail address below.
Thanks es 73 Ernie
- ----- Original Message -----
From: "Steve" <steve@comcoinc.com>
To: <wm2u@qsl.net>
Sent: Tuesday, April 18, 2000 3:59 PM
Subject: psk31
> Hello,
>
> My name is Steve "ad6ht". I am looking for someone that can give a talk
> about psk31 at a club meeting in the near future. We are the Downey
> amateur radio club located in Downey, California. That's about 20 ne of
> Los Angeles.
>
> Can you direct me to someone in my area that can assist.
>
> 73
> Steve
> ad6ht@arrl.net
>
------------------------------
Date: Wed, 19 Apr 2000 08:26:01 -0500
From: John Chamberlain <chamber@cord.org>
Subject: [psk31] PSK31 IMD readings
On Tue, 18 Apr 2000 Julian G4ILO <julian@tech-pro.co.uk> wrote:
>I decided to check the output signal from my Elecraft K2 transceiver
>running 5W peak (it's a 10W QRP transceiver) by decoding it on another
>receiver. Even into a dummy load the signal was so strong that I only
>needed a short length of wire for a receive antenna, consequently there was
>very little band noise and a very good signal to noise ratio. PSK31SBW was
>showing a figure of -35/-36dB....
Julian,
Your setup would be a good opportunity to check to see what conditions
(e.g., overdriving the soundcard) produce IMD. I, too, have become a
little leary of reporting bad signals just because I see a few extra bands
on the waterfall. I'm cautious that it might be my own receive setup
introducing the IMD. Can you find time to explore this kind of thing with
your test setup, and report to the list?
73 de AC5CV
John Chamberlain (AC5CV@arrl.net)
Waco, TX EM11jm
------------------------------
Date: Wed, 19 Apr 2000 22:11:12 -0400
From: Curt <cdunn@netsync.net>
Subject: [psk31] [PSK31] RigBlaster
Hello to all, and tnx for reading. Has anyone tried to use the
RigBlaster advertised in QST running PSK or any of the other digital
modes with any rig, but in particular the Kenwood TS-440 ? I would be
interested in any comments prior to making the purchase.
It seems like it can do the job, and even make things much easier
especially on this end. The URL for the device is
http://www.westmountainradio.com
Again, tnx, and feel free to reply via direct email.
73, Curt KA2SLC
------------------------------
Date: Wed, 19 Apr 2000 21:38:48 -0500
From: "Anthony L. Nunn" <nunn@tconl.com>
Subject: Re: [psk31] [PSK31] RigBlaster
I have one on order and I'll report as soon as I get a chance to use it.
Should be by early next week I hope.
- ----- Original Message -----
From: "Curt" <cdunn@netsync.net>
To: "PSK31 List" <psk31@bipt106.bi.ehu.es>
Sent: Wednesday, April 19, 2000 9:11 PM
Subject: [psk31] [PSK31] RigBlaster
> Hello to all, and tnx for reading. Has anyone tried to use the
> RigBlaster advertised in QST running PSK or any of the other digital
> modes with any rig, but in particular the Kenwood TS-440 ? I would be
> interested in any comments prior to making the purchase.
>
> It seems like it can do the job, and even make things much easier
> especially on this end. The URL for the device is
> http://www.westmountainradio.com
>
> Again, tnx, and feel free to reply via direct email.
>
> 73, Curt KA2SLC
>
------------------------------
Date: Wed, 19 Apr 2000 22:53:51 -0400
From: "Andrew J. O'Brien" <obrienaj@netsync.net>
Subject: [psk31] Re: [PSK31] Field Day
A good question, I was thinking that PSK would be ideal for FD and perhaps
worth some club's exclusive effort.
Andy KB2EOQ
- ----- Original Message -----
From: "The Clarks" <csclark@computron.net>
To: <psk31@qth.net>
Sent: Wednesday, April 19, 2000 10:56 PM
Subject: [PSK31] Field Day
> Do you-all expect much PSK activity during Field Day this year. I hope to
> set up a station to work Field Day and demonstrate this fun mode for our
Ham
> club. We heard some signals last year but did not make contacts due to a
> bad solder connection (found later). We are ready this year! Just wanted
> to kow what to expect.
>
> Thanks,
> Stephen Clark
> KD5CXD
>
>
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
to unsuscribe from the list send to majordomo@aintel.bi.ehu.es a message
with a text line as follow: unsubscribe psk31 or unsubscribe psk31-digest
More instructions on PSK31 Webpage: http://aintel.bi.ehu.es/psk31.html
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
------------------------------
End of Psk31 Digest V1 #368
***************************
Read previous mail | Read next mail
| |
