| |
PA2AGA > PACDIG 20.07.00 21:07l 152 Lines 4061 Bytes #-9243 (0) @ EU
BID : PR_2000_179B
Read: GUEST
Subj: PacketRadioDigest 2000/179B
Path: DB0AAB<DB0FSG<DB0PV<DB0MRW<OK0PKL<OK0PPR<OK0PJI<OM0PBB<SR9ZAA<SR9DIP<
HA3PG<SV1AAW<EA7URC<PE1NMB<PI8HGL
Sent: 000720/1331Z @:PI8HGL.#ZH1.NLD.EU #:62538 [Den Haag] FBB $:PR_2000_179B
From: PA2AGA@PI8HGL.#ZH1.NLD.EU
To : PACDIG@EU
Date: Thu, 20 Jul 00 14:15:47 MET
Message-Id: <pr_2000_179B>
From: pa2aga@pe1mvx.ampr.org
To: pr_broadcast@pa2aga.ampr.org
X-BBS-Msg-Type: B
> programs).
>
> But MixW32 is NOT freeware. It is sharware. Try the demo software.
>
> The web site for MixW32 is http://tav.kiev.ua/~nick/ham.html. Click on
> UT2UZ software for HAM radio.
>
> 73's
> Rob
>
> "Rodney Isom" <rodneyi@nooospam.hiwaay.net> wrote in message
> news:sn4lqaimnd680@corp.supernews.com...
> > Hi Folks,
> >
> > I'm trying to use my soundcard for packet instead of a TNC. I
downloaded
> > the AGW packet engine and WinPack 6.4, but I have no idea how to make
them
> > work together. Can someone please give me a brief explanantion of what
I
> > need to do to use this software or point me to something that is more
> > intuitive to use?
> >
> > Thanks in advance,
> >
> > Rodney, KF4COV
> >
> > ***************
> > Rodney Isom
> > Arab, AL
> > rodneyi@nooospam.hiwaay.net
> > (remove the obvious part to reply)
> >
> >
> >
> >
>
>
------------------------------
Date: Wed, 19 Jul 2000 22:33:38 -0400
From: "Rob" <Pse@NoEmail.Com>
Subject: Soundcard packet
I have a Yamaha sound card. It works great.
I think AGW and MixW32 just use the sound card driver that Windows loads for
your sound card. So ANY sound card that has a windows driver should work.
It sounds like you may have a windows sound card driver problem. Or perhaps
you have not set your Mixer settings properly. Oh yes, some Yamaha sound
cards ALSO have an external VOLUME CONTROL. You MUST set the VOLUME CONTROL
above 0 or you will not hear any volume REGARDLESS of the mixer settings.
I suggest you send UT2UZ an Email regarding your problems with MixW32. He
should be able to help you.
Oh yes, why are you hooking up your mic to your sound card?? You should be
hooking up your receiver's audio output (using an audio isolation
transformer and perhaps a resistor (or POT) for any required attenuation).
73's
Rob
"Rodney Isom" <rodneyi@nooospam.hiwaay.net> wrote in message
news:sncnj2b26tt102@corp.supernews.com...
> I tried this and AGW and can't get a peep out of my soundcard, although
the
> MixW32 looks like it's hearing noise picked up by the microphone. I've
> fiddled with all the mixer settings I can find, but no luck....I have a
> Yamaha sound card. Maybe it's not 100% Soundblaster compatible.
>
> Thanks for the advice,
> Rodney
>
> Rob <Pse@NoEmail.Com> wrote in message
> news:Jvjd5.31619$qS3.67093@tor-nn1.netcom.ca...
> > You may want to try MixW32 for windows and a sound card.
> >
> > MixW32 implements NOT ONLY 1200 baud packet BUT ALSO 300 baud HF packet,
> > RTTY, PSK31 and FSK31.
> >
> > It is very easy to use and setup! You just need to install one software
> > program to get on packet with your sound card (unlike some competing
> > programs).
> >
> > But MixW32 is NOT freeware. It is sharware. Try the demo software.
> >
> > The web site for MixW32 is http://tav.kiev.ua/~nick/ham.html. Click on
> > UT2UZ software for HAM radio.
> >
> > 73's
> > Rob
> >
> > "Rodney Isom" <rodneyi@nooospam.hiwaay.net> wrote in message
> > news:sn4lqaimnd680@corp.supernews.com...
> > > Hi Folks,
> > >
> > > I'm trying to use my soundcard for packet instead of a TNC. I
> downloaded
> > > the AGW packet engine and WinPack 6.4, but I have no idea how to make
> them
> > > work together. Can someone please give me a brief explanantion of
what
> I
> > > need to do to use this software or point me to something that is more
> > > intuitive to use?
> > >
> > > Thanks in advance,
> > >
> > > Rodney, KF4COV
> > >
> > > ***************
> > > Rodney Isom
> > > Arab, AL
> > > rodneyi@nooospam.hiwaay.net
> > > (remove the obvious part to reply)
> > >
> > >
> > >
> > >
> >
> >
>
>
------------------------------
End of Packet-Radio Digest V2000 #179
******************************
You can send in your contribution to this digest by
sending an e-mail to: packet-radio@pa2aga.ampr.org
or (via BBS-net) to: praga@pi8vnw.#zh2.nld.eu
Read previous mail | Read next mail
| |
