| |
M1BYT > HELP 25.08.03 15:41l 34 Lines 1424 Bytes #999 (0) @ WW
BID : 7E1725M1BYT
Read: GUEST DB0FHN
Subj: Re: Hex stud removal (ww2 surplus)
Path: DB0FHN<DB0RGB<DB0MRW<OK0PPL<DB0RES<ON0AR<GB7FCR
Sent: 030825/1231Z @:GB7FCR.#16.GBR.EU #:11863 [Blackpool] FBB-7.03a $:7E1725M1
From: M1BYT@GB7FCR.#16.GBR.EU
To : HELP@WW
VK3BO Opined with considerable skill:-
> I used an Allen hex-key for this, but the hex stud seemed to be
> frozen on the axle! What would be the proper way to do this
> without damaging the parts?
> I would appreciate a good response and will reply to it.
I my memory serves me correctly, I believe these tended to work loose in
use, so were tightened into place after a dab of what would today be
called 'Locktite', was applied to the threads. The only way to free them
is by the application of heat. Remove all heat susceptable bits first
(or cover with a damp rag), then use an hot air gun whilst trying to
turn the key.
ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
º 73 from Harry, M1BYT @ GB7FCR.#16.GBR.EU º
ÌÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͹
º International Museums Weekend 19th+20th June 2004 º
º www.ukradioamateur.org/imw/index.html º
ÌÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͹
º The ARC's FL/RAE courses + Newcomers Intro to º
º to amateur radio:- http://www.ukradioamateur.org/ º
ÌÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍËÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͹
º QTH: Garforth, W. Yorks.. º Timed 12:30 º
º harry.m1byt@tiscali.co.uk º 25 Aug 2003 º
ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÊÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
Message sent using WinPack-Telnet V6.80
Read previous mail | Read next mail
| |
