| |
G4UEQ > HELP 25.08.03 13:48l 23 Lines 791 Bytes #999 (0) @ WW
BID : 5258-GB7SYP
Read: GUEST DB0FHN
Subj: help with pro scanner
Path: DB0FHN<DB0RGB<DB0MRW<OK0PPL<DB0RES<ON0AR<GB7SYP
Sent: 030825/1223Z @:GB7SYP.#19.GBR.EU #:5258 [Barnsley] $:5258-GB7SYP
From: G4UEQ@GB7SYP.#19.GBR.EU
To : HELP@WW
hello everyone.
i wonder if anyone ca n help with a problem on my realistic pro 26 scanner ?
i t has worked fine for years, running of a p.s.u, but several times i
noticed a blank screen. it turned out that the psu socket was faulty.
fine i thought, i will just solder power leads straight to the board.
no problem with that, but when put back together it went extreme low
volume on am .
i took it out of the case and reassembled it again but it was just the
same.
rather than risk anything else going wrong i built a little chip audio
amp and all was ok again.
the problem now is the extension speaker socket is also faulty.
so my question is, before i buy a new scanner, can anyone help with
the original fault?
many tnx
73/s terry g4ueq
Read previous mail | Read next mail
| |
