| |
YT7MPB > BPQ 08.11.22 17:04l 25 Lines 939 Bytes #999 (0) @ WW
BID : 55932_YT7MPB
Read: DJ6UX GUEST
Subj: Re: Using FT-847 with (Lin)BPQ
Path: DB0FHN<DB0BLO<DB0ERF<OK0NAG<OK0NBR<SR1BSZ<IW0QNL<ON0AR<OZ5BBS<CX2SA<
N3HYM<YT7MPB
Sent: 221108/1453Z 55932@YT7MPB.#NSD.SRB.EU LinBPQ6.0.23
On 11/6/22 09:21, UT1HZM wrote:
> So maybe its happens because BPQ can't check first, if the radio active or not
> and missed early commands to send.
>
> If not that case, it worth to check RS-232 cable, possible its need full lines, not only RXD-TXD
> to have correct data flow.
> Just an idea...
Thank you, Sergey. In fact, I used the same CAT cable that I previously
used (successfully) with FT-1000MP. It was an open-end cable that I got
with the pactor modem. So I just soldered an RS232 plug to the open-end.
It worked pretty well with FT-1000MP and also with FT-1000Field.
And now for FT-847 I just changed the gender of that RS232 plug with a
male/female gender adapter. It seems that FT-847 is capable to accept
some commands if they are sent to it at 'SCS modem level' (via the
pactor modem CAT port). But not always good if they are sent by BPQ.
Need to make more tests.
--
73 de Misko YT7MPB@YU7BPQ.#NSD.SRB.EU
Read previous mail | Read next mail
| |
