| |
G0SYR > UIV32 21.02.08 02:40l 58 Lines 2539 Bytes #999 (0) @ EU
BID : 40760G0SYR
Read: GUEST DC9BM DL1DVE
Subj: Re: More..
Path: DB0FHN<DB0FOR<DB0SIF<DB0EAM<DB0SMG<DB0RES<DB0GOS<ON0AR<GB7CIP<GB7CIP<
GB7CIP
Sent: 080221/0029Z @:GB7CIP.#32.GBR.EU $:40760G0SYR
T:From: g0syr <g0syr@gb7cip.ampr.org>
T:Newsgroups: ampr.misc
T:Message-Id: <1jhaytsgmpawj.1dt49vj35isu6.dlg@40tude.net>
Hi Rodge and all,
Rodge wrote
>> UI-View32 sometimes referred to as APRS is a fantastic realtime comms mode
>> at the reach of all Radio Amateurs. The program was written like Winpack
>> by Roger G4IDE(SK) It is an excellent program, in use in this shack 24/7
>> for the last five years. At first glance one could be forgiven for
>> thinking its just a reporting system but, nowt could be further from the
>> truth and whether you use RF or INET it is really the bees knees!
On Tue, 19 Feb 2008 19:53:00 +0000, g0cjm%gb7imk.#43.gbr.eu@gb7cip.ampr.org
wrote:
>> IT IS ESSENTIAL that you are using a computer TNC stand-alone on INET, yes
>> you may get into my setup but you will not be acked nor will you rx my
>> response, for this you must be working with me on INET. Radio comms are
>> out of the question for a real-time two way comms:(
>>
>> I was so frustrated that i cud not get back to your G8 stn last night but
>> now you know the reason om. There is another way you could comms with me
>> and that is VIA a Store-Fwd Station. To my knowledge there are just three
>> in the country. My favourite is MB7UDP. This is what u do To:MB7UDP Port:I
>> Msg:g0cjm# ru there old man? Send. Now as soon as MB7UDP hears my beacon
>> he will tx ur msg to me and i will respond. But,fwiw,imho,this is not
>> real-time a qso could take place over hours. Think about it! Its worth a
>> try, or, To:EMAIL Port:I Msg:g0cjm@arrl.net message.
>>
>> Gud luck om and thanks fer the try.
>
> As a matter of interest i set up one of my mobiles ie 6xcj-9 today, new
> car new drill but did get my signals heard and transposed onto aprs.fi
> take a look and c. Got a rollicking for using to mni digipeaters but as
> ive sed am in stiks so really its just getting out that concerns me:)
How disappointing after reading your glowing testimonial for the
communication abilities of APRS to find you can't use radio :-(
Now what surprises me is that it would now appear from what you say, all
your QSO with G1LEV was conducted over the internet yet I see almost every
line you both send because it is being transmitted over radio on 144.800 Mhz
yet I can't speak to either of you, doesn't seem right some how does it ?
There seems little point sending store and forward messages I can do that
on here :-)
--
73 de Bryan
AX25 mail: G0SYR@GB7CIP.#32.GBR.EU
amprnet mail: g0syr@gb7cip.ampr.org
internet mail: g0syr@beeb.net
Read previous mail | Read next mail
| |
