| |
VK7AX > UIVIEW 08.02.08 01:35l 55 Lines 2219 Bytes #999 (0) @ WW
BID : VK7AX-0702IU
Read: GUEST DL1BAH DM3SG
Subj: [ui-view] Digest Number 4404
Path: DB0FHN<DB0RGB<DB0SL<DB0FSG<DB0RBS<DB0KTL<DB0LHR<F6KFT<LX0PAC<DB0NDK<
DB0ACH<DB0ACC<DB0GOS<DB0OVN<DB0II<DB0UHC<DB0CHV<DB0WHV<DB0PDF<TA2BBS<
IK0MIL<GB7CIP<SL0ZS<CE8FGC<SR1BSZ<IV3SCP<IR2UBX<IR2UBX<IK2XDE<PY1AYH<
ON4HU<F4BWT<I0TVL<VE2RXY<N9ZZK<CX2SA<ZL2BAU<VK7NW
Sent: 080207/0114Z @:VK7NW.#ULV.TAS.AUS.OC #:37568 [NWTARIG] FBB7.00g $:VK7AX-0
From: VK7AX@VK7NW.#ULV.TAS.AUS.OC
To : UIVIEW@VKNET
From:
There is 1 message in this issue.
Topics in this digest:
1a. Re: What is needed for mobile APRS monitoring?
From: David Russell
Message
________________________________________________________________________
1a. Re: What is needed for mobile APRS monitoring?
Posted by: "David Russell" davidrus@alphalink.com.au davidxdrdennis
Date: Mon Feb 4, 2008 10:28 pm ((PST))
Jeffrey wrote:
> >
> > Hello,
> > I have been running APRS out of the house for a long time and also
> > of course out of the mobile. I run a Tinytrak3 into a Kenwood 241A 2m
> > mobile. Built a setup where it just sits inside my trunk on a spare
> > battery I charge once it gets low. This way it stays out of the way,
> > sort of forgotten about but always running. Anyway, I would like to
> > go a step deeper in the hobby. What is required or needed to be able
> > to monitor UIVEW32 inside a mobile? I have a spare laptop that can
> > run UIVIEW32, extra 2 meter radio, a Kantronics PacketCommunicator 3.
> > All this laying around inside my shack collecting dust. What do I have
> > to do to basically get UIVIEW32 to show me all the local activity on
> > the laptop like at home, but in the mobile?
> >
> > Hmmm, if I have all the basic necessities awesome if not then tell me
> > what else I need.
> >
> > Jeffrey
> >
> >
HELLO JEFFERY David xdr I HAVE A MFJ TNC DONATED TO ME BY MAX W TRYING TO SET IT UP CONNECTED TO MY847 RADIO using UI VIEW NOT HAVING A LOT OF SUCSESS but can see my station there but nothing else 73 take care david 3xdr
Messages in this topic (4)
________________________________________________________________________
________________________________________________________________________
Please see <http://www.apritch.myby.co.uk/uiv32.htm> for UI-View registration information.
Precision Mapping version 8 works with UI-View32; the necessary additional PMapServer7 is available for download at <http://www.ui-view.org>.
At <http://wa8lmf.net/aprs/UIview_Notes.htm>, you will find useful hints and info for your UI-View setup and use.
------------------------------------------------------------------------
Read previous mail | Read next mail
| |
