|
ZS1PT > APRS 08.07.07 10:04l 42 Lines 923 Bytes #999 (0) @ WW
BID : 2C0008ZS1PT
Read: GUEST
Subj: UI-VIEW with PK-88 TNC
Path: DB0FHN<DB0FOR<DB0MRW<OK0PPL<DB0RES<IK2XDE<IW2OAZ<CX2SA<ZS0MEE<ZS0BEL<
ZS0STB
Sent: 070707/1743Z @:ZS0STB.TBG.WCP.ZAF.AF #:5182 [Durbanville] FBB7.00g25
From: ZS1PT@ZS0STB.TBG.WCP.ZAF.AF
To : APRS@WWW
Greetings ;)
Having dusted off an old PK-88 I'd like to get it working with UI-VIEW.
Reception of local stations is fine. Packet reception appears to working
perfectly.
On the transmit side however, something small appears to be throwing a
wobbler.
Setup is as follows :
COMMS : 4800
DATA : 8
STOPS : 1
PARITY : NONE
HANDSHAKING : RTS / CTS
HOST : NONE
TNC : PK232 (no, PK88 default)
On switch-on only PWR and MULT burn (Memory jumper removed) followed by :
CMD and DCD on start of the UI-VIEW program
Followed by CONV, DCD and STA
On SEND ??? Random timing ??? Only CONV and DCD LED's burn
F9 (Beacon Send) only the STA LED burns - No transmit though.
Any help in setting up this TNC, to work properly, with UI-VIEW will be
greatly appreciated.
Best 73 - Pete, ZS1PT @ ZS0STB.TBG.WCP.ZAF
Message timed: 19:33 on 2007-Jul-07
E-mail : pburnham@stocks.co.za
Read previous mail | Read next mail
| |