| |
2E1FXN > TSTH 02.06.99 04:36l 29 Lines 1128 Bytes #999 (0) @ EU
BID : 1868-2E1FXN
Read: GUEST
Subj: is it possible to use BPQ & Baycom
Path: OE1XAB<OE3XPR<OE3XBS<S50BOX<S50MBL<IV3LAV<IV3AVQ<I4UKI<IK6RUY<IW0QMN<
IK6IHL<IT9LCP<IW9CNZ<IT9ICS<IW9EAO<IT9VZP<9H1BBS<GB7HFG<GB7DEO<GB7GFD<
GB7NLY<GB7DID<GB7AVM<GB7BEN<GB7LWB<GB7COV<GB7COV<GB7MAX<GB7WRG<GB7SYP
Sent: 990601/1130Z @:GB7SYP.#19.GBR.EU #:47922 [Barnsley] FBB7.00g23
From: 2E1FXN@GB7SYP.#19.GBR.EU
To : TSTH@EU
[¯¯¯ TST HOST 1.43b, UTC diff:-1, Local time: Tue Jun 01 11:22:56 1999 ®®®]
Hello All
I have 2 Baycom modems attached to my 386sx25 running TSTHOST1.43b
& using TFPCX 2.73 at present, my hope is to allow other stations connect
from my port1 to stations on port2 and in the reverse as with the BPQ Node
software.
I Have BPQ operating with its term4 program and using the SWITCH software,
is it possible to interface BPQ with TSTHOST, which would solve all the
problems I am currently having.
I am using TSTH on 6M and 70cms but there seems to be no way to allow
others to access the 6M port.
All replies will be gratefully recieved and responded to, via SP, TIA.
73 de Dave, 2E1FXN @ GB7SYP.#19.GBR.EU - Enjoying the Hobby!
Tagline: the problems of the world are due to lack of communication!
solve them by sending me a message...
QTH : Shirecliffe, Sheffield IO93GJ TSTHOST 1.43b & TFPCX 2.73
Email : 2e1fxn@bigfoot.com Website: www.bigfoot.com/~2e1fxn
70cms Icom IC-4SE - 433.700mhz 6Mtrs Palstar KH-6 - 50.650mhz
Read previous mail | Read next mail
| |
