| |
VK2ZRG > TPK 18.12.05 04:34l 29 Lines 890 Bytes #999 (0) @ WW
BID : 1870_VK2ZRG
Read: GUEST
Subj: TNC commands at close down?
Path: DB0FHN<DB0FOR<DB0SIF<DB0EA<DB0ACC<DB0GOS<DB0RES<DK0WUE<I0TVL<VK2TGB<
VK2IO<VK2WI
Sent: 051218/0242Z @:VK2WI.#SYD.NSW.AUS.OC #:1291 [SYDNEY] FBB7 $:1870_VK2ZRG
From: VK2ZRG@VK2WI.#SYD.NSW.AUS.OC
To : TPK@WW
VK2ZRG/TPK 1.83d Msg #:1870 Date:17-12-05 Time:22:51Z
Hello TPK users,
I've set up a macro to send commands to my TNC before
shutting down TPK. The idea is to change the connect message text CTEXT
and to have stations that connect to VK2ZRG while the PC is off,
connected to my TNC mailbox.
This works OK if I remember to use the macro before closing TPK.
What I would like to do is have the commands in a config file that
TPK reads automatically when it's shut down. Is this possible?
I've looked at the TPK help file and can't find anything on this
subject. As far as I know, CONFIG.TPK is only read when TPK starts up.
Any suggestions? Thanks in advance.
73s from Ralph VK2ZRG@VK2WI.#SYD.NSW.AUS.OC
/ack
Taglines Version 1.00, by Colin Coker G4FCN
C Program run, C Program Crash...ReWrite in Pascal!
Read previous mail | Read next mail
| |
