OpenBCM V1.13 (Linux)

Packet Radio Mailbox

DB0FHN

[JN59NK Nuernberg]

 Login: GUEST





  
ZL4CW  > TPK      28.08.96 17:41l 41 Lines 1536 Bytes #-11043 (0) @ WW
BID : 2E0084ZL4CW
Read: GUEST
Subj: Mods to TPK BEACONs
Path: DB0AAB<DB0KCP<HB9OS<HB9PD<HB9IAP<F1IOI<ZL2TZE<ZL2TZE<ZL2WA<ZL4AA<
      ZL4TAY
Sent: 960827/0243Z @:ZL4TAY.#95.NZL.OC #:26743 Bluff 5.15c $:2E0084ZL4CW
From: ZL4CW@ZL4TAY.#95.NZL.OC
To  : TPK@WW

It seems that the TPK BEACONs has generated quite some interest. I, like
a few others, was told that you can't beacon from TPK when using a Baycom
style modem. Now it appears that there are at least two method of doing
so.
First a modification to the BEACON setup I first sent out as a bulletin.
I have reduced the startup delay to 1 second, and G7CUX has come up with
the Unproto as CQ and 6a to return to the COMMAND mode instead of
BR YOURBBS SY. The modifications are as follows;

ATT 1
U CQ
<<Your beacon text>>
6a
A %TIME%+45 EX BEACON

The above works well. Now you can turn back on the BR YOURBBS SY sync
command in the CONFIG.TPK file, that we previously disabled. The 6a works
well too, returning TPK back to the command mode.

Now another method of running a beacon has been recommended by G7CUX,
and that is to make it a MACRO, using the ALT M command to enter the
MACRO EDITOR and ADD a MACRO, and is added as follows;

BEACON U CQ^MCONV^M<<Your beacon text>>^M6a^MAT %TIME%+45 macro BEACON^M

In the CONFIG.TPK file change EX BEACON to M BEACON. This command is
case sensitive, in this example it must be upper case. M BEACON can be
typed at the command prompt too, but remember, as before, that the more 
program timers you set up, the more beacons that will be sent out. The
advantage of this beacon is that a delay is not needed. The ^M is 
interpreted as a carriage return or end of line by TPK.

73 - George, ZL4CW @ ZL4TAY.#95.NZL.OC

Message timed: 14:37 on 27 Aug 96



Read previous mail | Read next mail


 22.11.2026 18:20:16lGo back Go up