| |
ZS6ANW > TPK 26.08.96 16:45l 80 Lines 2846 Bytes #-11045 (0) @ WW
BID : 38_ZS6ANW
Read: DL3MDI GUEST
Subj: re TPK BEACON for BAYCOM
Path: DB0AAB<DB0PV<DB0WGS<OE3XSR<OK0PBX<OK0PKR<OM0PBB<HA5KDF<HG8GL<HA5OB<
HA3PG<WB0TAX<F6CNB<KD4IDR<K4VJI<KN4YT<KF4HFR<KI4ZJ
Sent: 960825/2054Z @:KI4ZJ.#SRQ.FL.USA.NA #:384 [SARASOTA, FL] FBB7.00 $:38_ZS6
From: ZS6ANW@KI4ZJ.#SRQ.FL.USA.NA
To : TPK@WW
R:960825/0902Z @:ZS6RO.TVL.ZAF.AF #:41813 [Jo'burg] FBB7.00a $:38_ZS6ANW
R:960825/0324Z @:ZS0DLD.TVL.ZAF.AF #:57190 [KG34XH] FBB5.15c $:38_ZS6ANW
R:960824/2218Z @:ZS6AI.TVL.ZAF.AF #:4780 [KG43CW] FBB5.15c $:38_ZS6ANW
From: ZS6ANW@ZS6AI.TVL.ZAF.AF
To : TPK@WW
ZS6ANW/TPK 1.82 Msg N§:38 Date:25-08-96 Time:0:31 SAST (-2HRS for Z)
Hi Tpkers
George ZL4CW has come up with a nifty solution for Tpk+Baycom users
towards accessing the facillity of putting out a beacon. I have always
been aware of the timer facility for TPK and have have in fact put out
a bulletin in the past, for TPK+Cantronics users, on how to get an
extra ID beacon going, being aware of the fact that the letter "K" will
put the Kam into CONVERSE mode, but was I not aware of the existence of
the CONV command for TPK, which does exactly the same thing.
However, it is possible for me to contribute towards George's
(ZL4CW) problem of getting TPK back to the command mode. He writes:
>The following file I have named BEACON;
>Change the text to suit your BEACON TEXT and BBS.
>ATT 5
>CONV
><<George - Invercargill - TPK 1.82 - PMS is ZL4CW-1>>
>BR ZL4TAY SY
>A %TIME%+45 EX BEACON
>The ATT 5 causes a 5 second delay before sending out the BEACON and the
>FBB sync request. This prevents some of the other commands in CONFIG.TPK
>from being sent out with the beacon and the FBB SYNC on startup.
>The CONV puts TPK into the CONVERSE mode so that the following BEACON text
>is sent. I still have to find a more satisfactory way to get out of the
>CONVERSE mode, the BR ZL4TAY SY sync request works, and puts it into the
>COMMAND mode and is relatively harmless. At present there doesn't seem to
>be any key or control sequence that will return TPK to the COMMAND mode,
>other than pressing F6.
The solution for getting out of the CONVERSE mode is to use the
facility of F6 but instead of pressing this key one can program its
simulation, using the notation "^6". George's BEACON file can
therefore be ammended as follows:
ATT 5
CONV
<<George - Invercargill - TPK 1.82 - PMS is ZL4CW-1>>
^6
A %TIME%+45 EX BEACON
The only change, therefore' being the substitution of the sync request
BR ZL4RTAY SY with ^6, which simulates pressing the F6 key and which
places the system back to COMMAND mode. This will eliminate the
unnecessary BBS sync request.
I hope this bulletin reaches you George
ÛßßßßÛ ÜßßßÜ DE  ÚÄ¿ ÚÄ¿
Û ÜÜß ³ ³ ³ ÃÄ ððððððððððððððððððððððððððð
Û ßÜ ÀÄÙ ÀÄÙ ÀÄÙ * ZS6ANW@ZS6AI.TVL.ZAF.AF *
Û Ü Û QTH POTCHEFSTROOM - NORTHWEST PROVINCE
ß ßßß ððððððððððððððððððððððððððððððððððððððð
Read previous mail | Read next mail
| |