| |
VK5TRM > TPK 18.08.96 21:02l 35 Lines 1594 Bytes #-11052 (0) @ WW
BID : 2056_VK5TRM
Read: GUEST
Subj: TPK SWapp command
Path: DB0AAB<DB0FSG<DB0IGL<DB0KCP<DB0CZ<DB0GE<LX0PAC<ON7RC<ON1BWP<ON6AR<
F6CNB<WB0TAX<KA6EYH<VK2TLH<VK2BXQ<VK5BRL
Sent: 960815/0703Z @:VK5BRL.#RIV.#SA.AUS.OC #:39790 [Berri, SA] FBB5.15c
From: VK5TRM@VK5BRL.#RIV.#SA.AUS.OC
To : TPK@WW
VK5TRM/TPK 1.82 Msg #:2056 Date:15-08-96 Time:6:55Z
HI ALL....
I am not sure of how many of you are aware of the SWapp command
in TPK 182. If you have a IBM 286 or comp and above you can swapp the
recieve buffer of TPK to your upper memory thus giving you more lower
memory for other uses such as the shell to dos (F3) and running a text
editor though the message writing screen. This also means that you can
increase your recieve buffer size and scroll back from 500 lines to 1500
lines based on a 286 with 1M of memory
To set this up edit your config.tpk file with a normal text editer.Find the
line that saids "BUFFER 500" Replace the 500 with 1500.Now go to the bottom
of the file and put in as the last line "SW ON XMS" Save the file and now
re-boot TPK. When it has finished re-booting it should have the line on the
screen "recieve buffer swapped to XMS during Dos shell" This means it has
all worked ok..
CHEERS AND 73's
NAME: ROBERT MIDDELMANN
PACKET ADDRESS: VK5TRM @ VK5BRL.#RIV.#SA.AUST.OC
POSTAL ADDRESS: C-O LOXTON CARAVAN PARK,LOXTON S.A 5333
QTH LOCATOR: QF05FO (180 km N.E of Adelaide S.A)
COMPUTER: IBM COMP 286
SOFTWARE: TPK ver 1.82
TNC: KANTRONICS KPC 3
RADIO 6M PLESSEY MTR 8000 (FREQ 53.000 MHZ)
RADIO 70CM: MOTOROLA SYNTREX (FREQ 439.075 MHZ)
ANTENNA 6M HOME BREW HALF WAVE VERTICAL
ANTENNA 70CM: HOME BREW 16 ELEMENT BEAM
Read previous mail | Read next mail
| |