OpenBCM V1.13 (Linux)

Packet Radio Mailbox

DB0FHN

[JN59NK Nuernberg]

 Login: GUEST





  
ZL4CW  > TPK      17.08.96 12:07l 31 Lines 1315 Bytes #-11054 (0) @ WW
BID : 13_ZL4CW
Read: GUEST
Subj: RE TPK BEACONs.
Path: DB0AAB<DB0PV<DB0WGS<OE3XBS<OE6XHG<HG1KZC<HA1VH<HA5KDF<OM0PBB<OK0PKR<
      OK0PBB<OK0PAB<OH3RBR<VE4KV<KE0WO<KB0HLO<N0RSE<M0DEM<ZL2TZE<ZL2TZE<
      ZL2WA<ZL4AA<ZL4TAY
Sent: 960815/0101Z @:ZL4TAY.#95.NZL.OC #:25224 Bluff 5.15c $:13_ZL4CW
From: ZL4CW@ZL4TAY.#95.NZL.OC
To  : TPK@WW

ZL4CW/TPK 1.82 Msg #:13  Date:15-08-96  Time:13:02Z

I  should  have  mentioned  in my previous bulletin on TPK BEACONs & CTEXTs
that  it is possible to test your beacons manually by typing EX BEACON when
not  connected. This  will  send the  beacon, and  display  it and the sync
request, but please remember that you will  now  have  two  timers setup to
send beacons! The first timer was sent by the  CONFIG.TPK  and  the  second
timer was sent manually by you.

If you do  more  manual  tests  you will have more timers setup!! You could
conceiveably have beacons  transmitting  at every few minutes, depending on
how many timers you have set up while testing!!!

To  list  the timers that are waiting type A followed by a carriage return.
If more than one shows up as a beacon timer, then delete them till you have
only one listed as a beacon timer. Don't delete your other script timers if
you have any set up.

To remove the extra timers use the EFA command. If you are deleting a timer
that displays at A 12H25 EX BEACON  for example, type EFA 12H25. The  other
method is to  exit  TPK  and then re-start it, allowing the CONFIG.TPK file
to  set  up  one  beacon  timer  from  scratch, as mentioned in my previous
bulletin.

73 de Geo. ZL4CW@ZL4TAY.#95.NZL.OC



Read previous mail | Read next mail


 22.11.2026 19:14:21lGo back Go up