| |
OE1SMC > DPTNT 21.02.99 23:43l 64 Lines 1755 Bytes #999 (999) @ WW
BID : L29OE1XAB084
Read: GUEST
Subj: little faq for tnt
Path: DB0MAK<DB0PV<DB0WGS<OE3XSR<OE1XAB
Sent: 990221/2041z @:OE1XAB.#OE1.AUT.EU [OeVSV-LV1 BBS SysOp OE3DZW] bcm1.40n2
From: OE1SMC @ OE1XAB.#OE1.AUT.EU (Hans)
To: DPTNT @ WW
X-Info: No login password
tnt - a program by mark wahl, dl4ybg
questions i receive sometimes. (990221)
q: is it necessary to install ax.25-kernel
or ax.25 utils ?
a: no
tnt can be installed without this.
q: i forgot to switch on the tnc2
what to do ?
a: this is a well known proplem.
only a kill -9 <pid> does help immediatly.
q: i have a linux distribution from xyz.
is it possible to compile tnt ?
a: i don't know. try it.
tnt is able to be compiled on near
every linux distribution.
q: is it possible to telnet to tnt ?
a: yes
you have to open a port with the following command
:socket axspec loopback:2222
this can either be done from the window or
in the configuration-file itself.
where 2222 is an example of an portnumber.
if your_computer is connected to lan, then you
can do from every other computer of the lan a
telnet your_computer 2222
and also you can on your_computer a
telnet loopback 2222
and use the features of a xterminal or wherever
you did start the telnet-session.
also you have to modify the file netpass.tnt
as described in the documentation.
important information:
connecting over a non-ham-network is not allowed
in austria due to the new law for amateur radio.
q: digi says: txdelay too long
a: modify the parameter t
reduce the value. reduce more up to a point, it
will still not work again. then increase with 2
you can do this by keying in ":t <value> <return>"
and checking the value with ":t <return>"
q: tfkiss was terminating normally.
after new start it hangs.
a: remove the file tfkiss.par
best regards from vienna
hans
oe1smc/oe1xya
Read previous mail | Read next mail
| |
