| |
G0FTD > RF 24.12.05 12:16l 11 Lines 309 Bytes #999 (0) @ WW
BID : EA3161G0FTD
Read: GUEST OE7FMI
Subj: Re: RF down a plastic spindle?
Path: DB0FHN<DB0RGB<DB0MRW<DB0HOT<DB0ERF<DB0FBB<DB0IUZ<DB0GOS<DB0RES<DK0WUE<
7M3TJZ<HS1LMV<ED1ZAC<GB7YKS<GB7LGS<GB7ESX<GB7NNA
Sent: 051224/0918z 75623@GB7NNA.#31.GBR.EU $:EA3161G0FTD [Witham, Esx]NNA V3.1
G3ZJO wrote:-
>> So how does the RF travel to the grub screw and give an RF burn ?
>
> Hmm, someone has fitted the shaft the wrong way round. Re fit with the
> knob on the Negative Phase end and the RF will flow back in instead of
> out.
Or a decoupling capacitor at each end of the spindle ;-))
- Andy -
Read previous mail | Read next mail
| |
