VK8PDG > TECH 14.09.04 18:51l 35 Lines 1545 Bytes #999 (0) @ WW
BID : 44724_VK8PDG
Read: GUEST OE7FMI
Subj: YAESU FT3000M Noise problems
Path: DB0FHN<DB0MRW<OK0PKL<OK0PPL<DB0RES<ON0AR<VE3FJB<E20LAL<VK8PDG
Sent: 040915/1114Z @:VK8PDG.PLM.#NT.AUS.OC #:44724 FBB7.00i $:44724_VK8PDG
From: VK8PDG@VK8PDG.PLM.#NT.AUS.OC
To : TECH@WW
Hello All.
Just a few tips concerning the FT3000M in that some time one can hear some
odd noise being TX on the audio !.
You can start by having a good look at the power conector in line with the
radio.
It sounds silly but I have found that this connector can give problems and
put odd line noise onto the TX audio.
Just clean or replace the male/female connector and you will find that the
noise has gone.
Regards
Peter VK8PDG 15-Sept-04
(``\-^.^-/'') Forward for a better Future (``\-^.^-/'')
`( 0 0 )' `( 0 0 )'
IIIIIIIIIIooO (_) OooIIIIIIUIIUIIIIIIIIIIIooO (_)OooIIIIIII
U U VK8PDG@winlink.org
WW LOCATOR -PH57LM U U Sysops: Peter
Winlink/WinFBB32/APRS U U Info on : QRZ.COM
VK8PDG-L EchoLink Node 7593 .. RF DTMF Link Freq: 146.150 Mhz
First on Line in THE NORTHERN TERRITORY second on line Australia Wide
QRV TelNet BBS: Static IP 61.9.228.188 Port:6300 or 23
YOUR PACTOR/PACKET/TELNET/NEXUS GATEWAY IN THE NORTHERN TERRITORY
Web Site: http://www.vk8pdg.com
** Supporting Digital Communications in VK8 since 1998 **
<><> ( ) Oo. VK8PDG @ VK8PDG.PLM.#NT.AUS.OC ( ) Oo. <><>
EIIIIIIIIIII\_)III( )IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII\_)III( )IIIIIII
Read previous mail | Read next mail
| 
