| |
ZL3AI > APRDIG 22.06.03 08:49l 36 Lines 1384 Bytes #999 (0) @ WW
BID : 1513-ZL3AI
Read: GUEST
Subj: TAPR Digest, Jun 19, 3/3
Path: DB0FHN<DB0RGB<DB0MRW<OK0PKL<OK0PCC<OK0NAG<OK0PPL<RZ6HXA<IK1ZNW<ON0AR<
VK6HGR<ZL2BAU<ZL3VML
Sent: 030621/1328Z @:ZL3VML.#80.NZL.OC #:2805 [Chch-NZ] FBB7.00i $:1513-ZL3AI
From: ZL3AI@ZL3VML.#80.NZL.OC
To : APRDIG@WW
Subject: APRS+SA help
From: N4QWF@aol.com
Date: Thu, 19 Jun 2003 22:08:02 -0400
X-Message-Number: 25
Taking a look at this version and need a little help. Seems the spots don't
wont to appear on the street atlas map. I can get them there using the
CRTL+2 key stokes but there must be away to get them to do live updates.
Sure hope the forced CRTL+2 function is not all it will do. Anyone know
anything about this? Thanks for the help. 73's << John
----------------------------------------------------------------------
Subject: Stupid Question Time; IC-746 "Pro"
From: "Matthew Stennett" <wa4tkg@iwon.com>
Date: Thu, 19 Jun 2003 23:06:29 -0400 (EDT)
X-Message-Number: 26
I used to have an IC-746...without a doubt, the BEST radio I have bought to
date. The problem is/was, it had NO "data" (Mini-DIN) connector, as the
"Pro" model does. I would LIKE to think, that connector #5 on the back
panel will allow operation of ALL bands HF & 2m inclusive. The ORIGINAL
746 had NO MEANS of getting you onto 2m packet, if you already had "ACC #1"
wired up for HF, thus the "AF" pin was already being used for the #1 ACC.
TELL ME; SOMEONE who actually has one WIRED UP, they have FIXED this, or
did we, once again, ENGINEER a DEFECT into the 746, AGAIN? (IF the DID; I
may just go and buy a USED 746 [original model].
---
END OF DIGEST
Read previous mail | Read next mail
| |
