| |
ZL3AI > APRDIG 21.06.03 19:06l 47 Lines 1351 Bytes #999 (0) @ WW
BID : 1497-ZL3AI
Read: GUEST
Subj: TAPR Digest, Jun 15, 2/2
Path: DB0FHN<DB0RGB<DB0FSG<DB0GAP<DB0BOX<DB0MRW<DB0ERF<DB0FBB<DB0GOS<DB0EEO<
DB0RES<ON0AR<ZL2BAU<ZL3VML
Sent: 030617/1329Z @:ZL3VML.#80.NZL.OC #:2629 [Chch-NZ] FBB7.00i $:1497-ZL3AI
From: ZL3AI@ZL3VML.#80.NZL.OC
To : APRDIG@WW
Subject: Re: PIC accessory for Mobile APRS
From: "Wes Johnston" <wes@johnston.net>
Date: Sun, 15 Jun 2003 18:52:56 -0400
X-Message-Number: 9
just command the d700 (assuming it's already in APRS mode) to BCN 0 <pause
100ms> BCN 1 . It'll beacon it's posit within a second of that.
Wes
----- Original Message -----
From: "Andrew McDade" <amcdade@senet.com.au>
To: "TAPR APRS Special Interest Group" <aprssig@lists.tapr.org>
Sent: Sunday, June 15, 2003 12:32 AM
Subject: [aprssig] Re: PIC accessory for Mobile APRS
>Gday all,
>
>Im curious to know whether someone has figured out the TMD700 control
>command for outputting their own position data. All other commands are there
>to accomplish what Bob is suggesting here except, perhaps ?, a way to output
>the current location data. The other way of course is to have a seperate
>data feed from the GPS to the pic chip. Not as neat though, but maybe the
>only option.
>
>73 .. Andrew .. VK5EX
----------------------------------------------------------------------
Subject: import raw data
From: "Joe Della Barba" <joe@dellabarba.com>
Date: Sun, 15 Jun 2003 20:30:53 -0400
X-Message-Number: 10
Is there any way to take the raw data from FINDU and have APRS+ read it and
plot the positions?
Thanks,
Joe Della Barba
73 de N3HGB-5
---
END OF DIGEST
Read previous mail | Read next mail
| |
