| |
ZL3AI > APRDIG 12.06.03 10:16l 223 Lines 7327 Bytes #999 (0) @ WW
BID : 1472-ZL3AI
Read: GUEST
Subj: TAPR Digest, Jun 09, 2/2
Path: DB0FHN<DB0RGB<DB0IGL<DB0FSG<DB0MAK<DB0MRW<OK0PKL<OK0PPL<DB0RES<ON0AR<
ZL2BAU<ZL3VML
Sent: 030611/1402Z @:ZL3VML.#80.NZL.OC #:2234 [Chch-NZ] FBB7.00i $:1472-ZL3AI
From: ZL3AI@ZL3VML.#80.NZL.OC
To : APRDIG@WW
Subject: Re: Firenet.us DNS server down?
From: "Spider" <spider@rivcom.net>
Date: Mon, 9 Jun 2003 11:08:25 -0700
X-Message-Number: 11
it's back up! turned it off last night after APS blew up some huge fuses
feeding a transformer that feeds the entire town!
Waited until they got it back up to be safe. I was at the transformer
during the one of the explosions! THAT was exciting!
We actually shut down the entire ISP!
Jim, WA6OFT
----------------------------------------------------------------------
Subject: replicating KISS ports under windows
From: Alex <kr1st@amsat.org>
Date: Mon, 09 Jun 2003 15:50:12 -0400
X-Message-Number: 12
Hi there,
Is anyone aware of a trick for windows to replicate (KISS) ports?
Under Linux I used to use mkiss and kissattach to replicate data
received from one port to another and vice versa, but Ihaven't found
anything like that for Windows. I have a Windows95 setup running UI-View
with a KPC3 in KISS mode. I'd like to share this TNC on another serial
port. (AGWPE does not do this as far as I can tell).
73,
--Alex KR1ST
----------------------------------------------------------------------
Subject: GPS DATA TO WinAPRS
From: Gonzales Andy <agonzales@arc.nasa.gov>
Date: Mon, 9 Jun 2003 13:06:20 -0700
X-Message-Number: 13
When you have a GPS receiver feeding position reports to a Kenwood,
and the Kenwood conected to a PC runnng WinAPRS, does the GPS
position data get sent to WinAPRS over the serial port ?
If not, does that mean that if you are moving do you still have to
update your station location manually in WinAPRS ?
Or if you are transmitting your position, do you have to look for
yourself in order to update your moving position. Right now I can't
do that until I pass the Technician's exam.
Or do yo need a second GPS receiver connected to the GPS port ?
--
Andy Gonzales
NASA / Ames Research Center
Moffett Field, CA 94035-1000
Bldg. N-244, Rm. 240
MS 244-19
agonzales@arc.nasa.gov
650-604-0309
----------------------------------------------------------------------
Subject: Re: GPS DATA TO WinAPRS
From: WA8LMF2@aol.com
Date: Mon, 9 Jun 2003 16:33:21 EDT
X-Message-Number: 14
In the "PACKET" mode, GPS data fed into the the dedicated GPS port is echoed
out the main serial port to the computer , along with data from the TNC.
But only if you run the interface in the normal TNC command mode. If you
initialize the TNC into the KISS mode, the GPS echoing is non-functional.
It is then up to the client program on the PC to separate the TNC traffic and
local GPS data strings. [ All current Windows APRS clients; i.e. APRSplus,
APRSpoint, UI-View and WinAPRS do this. ]
When the D700/TH-D7 are run in their standalone "APRS" modes that use the
front panel display as an APRS terminal, the GPS echoing also does not happen.
----------------------------------------------------------------------
Subject: Re: GPS DATA TO WinAPRS
From: Mark Sproul <msproul@jove.rutgers.edu>
Date: Mon, 9 Jun 2003 16:36:27 -0400
X-Message-Number: 15
At 1:06 PM -0700 6/9/03, Gonzales Andy wrote:
>When you have a GPS receiver feeding position reports to a Kenwood,
>and the Kenwood conected to a PC runnng WinAPRS, does the GPS
>position data get sent to WinAPRS over the serial port ?
Yes, in WinAPRS you have to go to SETTINGS / SERIAL PORT and
check ALLOW GPS
>If not, does that mean that if you are moving do you still have to
>update your station location manually in WinAPRS ?
Configure as above and it works fine.
>Or if you are transmitting your position, do you have to look for
>yourself in order to update your moving position. Right now I can't
>do that until I pass the Technician's exam.
>
>Or do yo need a second GPS receiver connected to the GPS port ?
No, this would be totally un-acceptable.
------------------------------------------------------------------
Mark Sproul |
http://ecs.rutgers.edu |
msproul@jove.rutgers.edu |
Manager - Engineering Computing Services | 732-445-3121
Rutgers University School of Engineering |
Eng D111 |
------------------------------------------------------------------
----------------------------------------------------------------------
Subject: Connecting to a Ui-View Igate
From: "Michael J. Wolthuis" <wolthui3@msu.edu>
Date: Mon, 09 Jun 2003 16:27:12 -0400
X-Message-Number: 16
Several new IGATES have come online here in Michigan and are running
UiView32 as apposed to other options. Unfortuanetly I can not figure
out a way to "telnet" connect to these igates? The reason I would like
to do this is to capture data from them in order to display it on our
javAPRS map.
Is there any reverse connection interface to these igates? Thanks,
Mike
kb8zgl
----------------------------------------------------------------------
Subject: " Junk " Packet Mail & MFJ 1270C
From: "Matthew Stennett" <wa4tkg@iwon.com>
Date: Mon, 9 Jun 2003 20:36:45 -0400 (EDT)
X-Message-Number: 17
I keep getting useless (to ME anyway) bulletins into the limited (32K)
mailbox in my 1270C. I have attempted to create a REJECT list (opposite of
BUD list) in order to reject what I consider JUNK packet mails, but to no
avail..can anyone tell me the command settings / lines to crate a REJECT
list to avoid uselss messages to my mailbox? I' ve looked through the
manual, and haven't noticed anything of use to create a REJECT " XXXX @
XXXX list. SPECIFICALLY, I want to REJECT messages from the following
station:
Old Istantrak Keplerians #152
I6KZR@IK6WID.#AP.IMAR.ITA.EU
ONE of these is enough to FILL my mailbox.
It CONTINUALLY attempts to load the message, endlessly keying my
transmitter, and when it gets to the point when the tnc realizes there's
not enough memory, the whole thing gets DUMPED, and I've just BURNED my
finals more, for NOTHING.
----------------------------------------------------------------------
Subject: ATTN: KY4KY Digi owner
From: "Michael J. Wolthuis" <wolthui3@msu.edu>
Date: Mon, 09 Jun 2003 17:14:50 -0400
X-Message-Number: 18
The Ky4ky digi appears to have two sets of coordinates and is moving
between Kentucky and Michigan every few packets, here is what I see in
Michigan:
44 10.17N 085 28.032W
Then 10 minutes later I see
38 03.800N 085 43.870W
Then it switches back. Appears to change positions every 10minutes, two
BLT beacons???
Just curious if there is a reason for this? I assume you can see what
is going on if you look at the rawposit page on FINDU which I have not done.
Thanks,
Mike
kb8zgl
----------------------------------------------------------------------
Subject: Updated list of APRS Servers
From: Mark Elliott <marklelliott@sbcglobal.net>
Date: Mon, 09 Jun 2003 21:24:56 -0500
X-Message-Number: 19
Hello,
Can anyone direct me to an updated list of APRS Servers?
Thanks in advance!
Mark de N9WST
----------------------------------------------------------------------
Subject: RE: Updated list of APRS Servers
From: "Dave Anderson" <dandersn@citicom.com>
Date: Mon, 9 Jun 2003 23:27:38 -0400
X-Message-Number: 20
Mark,
http://www.aprs-is.net/APRSServers.htm
That's the most up-to-date list I am aware of.
73 de Dave
KG4YZY
www.aprsfl.net
---
END OF DIGEST
Read previous mail | Read next mail
| |
