| |
ZL3AI > APRDIG 11.06.03 21:06l 284 Lines 8229 Bytes #999 (0) @ WW
BID : 1469-ZL3AI
Read: GUEST
Subj: TAPR Digest, Jun 08, 1/1
Path: DB0FHN<DB0RGB<OK0PPL<RZ6HXA<SP7MGD<VK7AX<ZL2BAU<ZL3VML
Sent: 030610/1328Z @:ZL3VML.#80.NZL.OC #:2157 [Chch-NZ] FBB7.00i $:1469-ZL3AI
From: ZL3AI@ZL3VML.#80.NZL.OC
To : APRDIG@WW
TAPR APRS Special Interest Group Digest for Sunday, June 08, 2003.
1. ISS
2. WX station setup question
3. Re: WX station setup question
4. Re: I'm working on it ( was Re: Virus warning)
5. Help with geo file for radar
6. GRR Radar geo file
7. Re: Help with geo file for radar
8. KAM XL Commands
9. Re: GRR Radar geo file
10. Power
11. Re: Power
12. RE: Project progress
13. RE: Project progress
14. WINAPRS Question
----------------------------------------------------------------------
Subject: ISS
From: "Andrew Rich" <andrew.rich@bigpond.com>
Date: Sun, 8 Jun 2003 15:57:48 +1000
X-Message-Number: 1
Is ISS active ?
----------------------------------------------------------------------
Subject: WX station setup question
From: cdapples <cdapples@cablemt.net>
Date: Sun, 08 Jun 2003 10:09:45 -0600
X-Message-Number: 2
Hi All,
I am setting up a remote wx station using the Peet Bros Ultimeter
2000 and a KPC3+. I have most of the TNC parameters setup
(as per the NWaprs web site) but I don't see any output from the Ultimeter.
- Does the serial cable from the Ultimeter need to be a null modem
cable?
- Is there a better output mode (complete data?) from the Ultimeter
other than the data logger mode?
--
Chris / KF7KN
+===============================+================================+
| Charles C. Dapples, Ph.D. | Red Lodge, Montana, USA |
+-------------------------------+--------------------------------+
| e-mail: cdapples@cablemt.net | Telephone: (406) 698-4989 |
+ or +--------------------------------+
| kf7kn@amsat.org | |
+-------------------------------+--------------------------------+
| Web page: http://www.wtp.net/~ccdapple/ |
+===============================+================================+
----------------------------------------------------------------------
Subject: Re: WX station setup question
From: "Spider" <spider@rivcom.net>
Date: Sun, 8 Jun 2003 09:47:03 -0700
X-Message-Number: 3
http://www.peetbros.com/HTML_Pages/faqs.htm#Q7
That will give you the serial pin-outs.
Jim, WA6OFT
----------------------------------------------------------------------
Subject: Re: I'm working on it ( was Re: Virus warning)
From: Neil Johnson <njohnsn@njohnsn.com>
Date: Thu, 5 Jun 2003 17:05:32 -0500
X-Message-Number: 4
On Friday 06 June 2003 08:07 am, John Kraus wrote:
>This morning I received an email that had a file attached that Norton
>flagged as containing the w32bugbear.mm worm. This email came in on the
>address that I use for my ham mailing lists. I have no way of knowing
>which list it came from as the header is spoofed.
>
>The infected file is named REGISTRATION.PDF.EXE
>
>If you have extensions hidden you could be at risk.
>
>For information on the worm goto
>
>http://www.symantec.com
>or
>http://www.cert.org/
>
>The spoofed header is below.
>
>Return-Path: <KB2HUK@njohnsn.com>
Sorry, I'm just checking my e-mail for the first time in a while.
I'm the owner of the njohnsn.com domain. It's a personal domain name.
There is no KB2HUK@njohnsn.com.
I can only think 2 things are happening.
1. One of the three computers that use this domain have been infected by a
virus. (My computer which runs linux, my wife's, for my father's) I am will
be scanning my sysystems ASAP.
2. Some one is using (hijacking) my domain as the return address.
I will keep you posted.
Any assistance would be appreciated (Please replay off list).
My appologies if it is a virus.
--
Neil Johnson, NOSFH
http://www.njohnsn.com
PGP key available on request.
----------------------------------------------------------------------
Subject: Help with geo file for radar
From: "Michael J. Wolthuis" <wolthui3@msu.edu>
Date: Sun, 08 Jun 2003 16:28:45 -0400
X-Message-Number: 5
Everyone,
I am trying to put a .geo file of Grand Rapids NWS radar into Xastir.
So far I have found the actual URL of the image, but what is the best
way to make/pick the tie points? Do you just use an image editor to get
two sets of pixels and then pick close coordinates?
Thanks for the help,
Mike
kb8zgl
----------------------------------------------------------------------
Subject: GRR Radar geo file
From: "Michael J. Wolthuis" <wolthui3@msu.edu>
Date: Sun, 08 Jun 2003 16:53:44 -0400
X-Message-Number: 6
I found the srb_grr.geo file from Dave's WXSRV and that is good, but I
can't get it to load in XASTIR. Do I need something besides the .geo?
Mike
kb8zgl
----------------------------------------------------------------------
Subject: Re: Help with geo file for radar
From: dale huguley <kg5qd@wxsvr.net>
Date: Sun, 08 Jun 2003 20:51:26 +0000
X-Message-Number: 7
Do it the easy way- goto
http://wxsvr.net/tmp/radar_geos_lrc_src.tar.gz
These are the geos in gzipped format for the Long and short range base
reflectivity for 137 of the Radar Sites.
73 de kg5qd Dale
----------------------------------------------------------------------
Subject: KAM XL Commands
From: "Matthew Stennett" <wa4tkg@iwon.com>
Date: Sun, 8 Jun 2003 16:57:13 -0400 (EDT)
X-Message-Number: 8
There is a Ham in my area, who has a Kantronics KAM XL. I own both an MFJ &
AEA, and apparently quite a few commands are NOT common between the two. Is
there anyone who can assist him with commands concerning the Mailbox access
(LOCAL; that is, HOW to get into his OWN mailbox), and any other stuff he
should set for proper operation. He is NOT into APRS, (we're just getting
him STARTED) give 'em at least a couple weeks or so, 'eh?
His call is:
KA2USA, Jacksonville Florida
kirkster@ilnk.com
TX
----------------------------------------------------------------------
Subject: Re: GRR Radar geo file
From: dale huguley <kg5qd@wxsvr.net>
Date: Sun, 08 Jun 2003 21:03:25 +0000
X-Message-Number: 9
Mine resides in:
/usr/local/xastir/maps/6-radar-short/
directory- the "6-" is to control the sequence of the overlays- just
moving it into /usr/local/xastir/maps/ should work-
select it along with what-ever-else maps and wait 30 second or so-
should plot- looks like you are in for another round of bad wx.
73 de kg5qd Dale
----------------------------------------------------------------------
Subject: Power
From: David VanHorn <dvanhorn@cedar.net>
Date: Sun, 08 Jun 2003 17:01:33 -0500
X-Message-Number: 10
Does anyone know what's the largest Gel cell that will comfortably fit in a
50 cal ammo can?
----------------------------------------------------------------------
Subject: Re: Power
From: "Mark Fellhauer" <sparkfel@qwest.net>
Date: Sun, 08 Jun 2003 17:52:18 -0500
X-Message-Number: 11
At 05:01 PM 6/8/2003, David VanHorn wrote:
>Does anyone know what's the largest Gel cell that will comfortably fit in
>a 50 cal ammo can?
I think most 50 Cal ammo cans are about 6" outside width. A 33 AH battery
is about 5 inches thick, maybe a tad wider.
Mark
KC7BXS
----------------------------------------------------------------------
Subject: RE: Project progress
From: "DUGAS, JASON A. (JSC-EP) (NASA)" <jason.a.dugas@nasa.gov>
Date: Sun, 8 Jun 2003 19:16:12 -0500
X-Message-Number: 12
How about some pictures of all this great work?!? :)
Jason Dugas
KB5URQ
----------------------------------------------------------------------
Subject: RE: Project progress
From: David VanHorn <dvanhorn@cedar.net>
Date: Sun, 08 Jun 2003 20:16:08 -0500
X-Message-Number: 13
At 07:16 PM 6/8/2003 -0500, DUGAS, JASON A. (JSC-EP) (NASA) wrote:
>How about some pictures of all this great work?!? :)
I don't have a web site at the moment, to post them on.
----------------------------------------------------------------------
Subject: WINAPRS Question
From: Joseph Schierer <kc2bzb@yahoo.com>
Date: Sun, 8 Jun 2003 20:34:27 -0700 (PDT)
X-Message-Number: 14
I am trying to get another station up and running on WINAPRS.
I can see his station, but when I send a message to Him, he never sees it,
and it is never ACKed in my message list. Other stations do receive my APRS
messages.
I know the station in question can hear me, we are only a few miles apart.
Any suggestions?
Joe Schierer
KC2BZB
Nassau County ARES
---
END OF DIGEST
Read previous mail | Read next mail
| |
