| |
ZL3AI > APRDIG 18.05.03 09:18l 153 Lines 4308 Bytes #999 (0) @ WW
BID : 1339-ZL3AI
Read: GUEST
Subj: TAPR Digest, May 14, 3/3
Path: DB0FHN<DB0RGB<DB0MRW<OK0PKL<OK0PPL<RZ6HXA<SP7MGD<ON0BEL<ON4HU<EA5RQ<
VK4TUB<ZL2BAU<ZL3VML
Sent: 030517/1337Z @:ZL3VML.#80.NZL.OC #:436 [Chch-NZ] FBB7.00i $:1339-ZL3AI
From: ZL3AI@ZL3VML.#80.NZL.OC
To : APRDIG@WW
Subject: FCC Callbook Database Download
From: "Don Lloyd" <ac4cx@netzero.net>
Date: Wed, 14 May 2003 16:56:40 -0400
X-Message-Number: 16
I am using version WinAprs 2.72 and cant seem to get it to find the i_amat
Folder that I have in the suggested place for it.Does any one have it
working and if so would you list the 2 fields like you have it in your
setting.. The ones in the help file did not work for me running xp.
Thanks
Don
----------------------------------------------------------------------
Subject: Kenwood D700A Question
From: "Christensen, Eric Harlan" <CHRISTENSENE@MAIL.ECU.EDU>
Date: Wed, 14 May 2003 18:42:45 -0400
X-Message-Number: 17
Group,
I have three questions about my Kenwood D700A that I have had mobile in my
Jeep for nearly a year.
1. I have my BEEP set to MINE only so that it will beep only when it
receives a message for me or it hears my beacon digipeated. I want it to
also beep when it receives weather bulletins for the MHX area (they are
already being sent out by my I-Gate and being received by my D700A). Is
there a way to set that up?
2. I found out that by setting my STATUS to CUSTOM1, I would automatically
receive SAT bulletins to let me know when a SAT would be coming overhead
(very neat!). Are there any other servers that send out information when
the status is set for CUSTOM2 or CUSTOM3 (...etc)?
3. I noticed today that my GPS was showing the correct location (Garmin GPS
II+) but the D700A was still showing an old location and continued to beacon
my old location (over 157 miles worth). Any ideas on this one?
Thanks,
Eric KF4OTN
----------------------------------------------------------------------
Subject: STATIONS.TXT & WX warnings question
From: "Jacob Tennant" <k8jwt@ntelos.net>
Date: Wed, 14 May 2003 19:30:45 -0400
X-Message-Number: 18
As I understand it, to have wx data igated to the RF side I need to have a
file named STATIONS.TXT setup like the below example.
PBZCEM IGATE
PBZEMA IGATE
PBZFFW IGATE
PBZFFA IGATE
PBZFFS IGATE
PBZFLW IGATE
PBZSKY IGATE
PBZSPS IGATE
PBZSVR IGATE
PBZSVS IGATE
PBZTOR IGATE
PBZWSW IGATE
RLXCEM IGATE
RLXEMA IGATE
RLXFFW IGATE
RLXFFA IGATE
RLXFFS IGATE
RLXFLW IGATE
RLXSKY IGATE
RLXSPS IGATE
RLXSVR IGATE
RLXSVS IGATE
RLXTOR IGATE
RLXWSW IGATE
What I was wondering is could I use a line like this instead?
PBZ* IGATE
RLX* IGATE
Similar to the way mentioned in a message earlier this week?
>Hi All-
> Sorry I won't be there this year to share the Marion's pizza.
>I have changed the way some things are parsed in Wxsvr.
>
>1. Output from the Severe Storms Forecast Center (SPC)
> a. Area objects such as Watch boxes now carry the SPC >number rather
>than the time stamp in the name. During the outbreak of last >week I
>found it hard to keep the tornado objects seperate from the >tornado
>watches. Short fuse objects carry a time stamp.
> b. Mesoscale discussions have an area object parsed with a >green
>dashed box and an overlay character of "D".
> c. I-gate operators should have "SPC*" in their file to gate >this to
>RF- not many packets.
Jacob Tennant K8JWT
PS: This is for the soon to be igate in Morgantown,WV to fill the gap along
I-79 & I-68.
----------------------------------------------------------------------
Subject: Re: STATIONS.TXT & WX warnings question
From: James Smith <k9apr@sbcglobal.net>
Date: Wed, 14 May 2003 18:43:45 -0500
X-Message-Number: 19
Hi Jacob, et all,
Actually if you wanted to IGATE NWS stuff to RF you need to create a txt
file called counties.txt and in the counties txt file just do this only.
The below is example of Indianapolis, In NWS office..
INDFFA
INDFFS
INDFFW
INDFLS
INDFLW
INDNPW
INDSKY
INDSPS
INDSVR
INDSVS
INDSWO
INDTOR
INDWSW
INDWWA
You don't have to hit tab and than put IGATE in this file it will
automatically gate without it.... I have been doing this for several
years now.... Hope this helps....
73, K9APR..
----------------------------------------------------------------------
Subject: tm733
From: "Wes Johnston" <wes@johnston.net>
Date: Wed, 14 May 2003 22:17:56 -0400
X-Message-Number: 20
Any one know how to get the tm733 into 9600 baud packet mode?
Wes
---
END OF DIGEST
Read previous mail | Read next mail
| |
