OpenBCM V1.13 (Linux)

Packet Radio Mailbox

DB0FHN

[JN59NK Nuernberg]

 Login: GUEST





  
ZL3AI  > APRS     04.10.00 12:32l 308 Lines 7642 Bytes #999 (0) @ WW
BID : 33748_ZL3AI
Read: GUEST
Subj: TAPR Digest, Oct 01, 1/7
Path: DB0MRW<DB0HOT<OK0PKL<OK0PPR<OK0PPL<OK0POK<9A0YRB<VK6BBS<VK2TGB<VK2IO<
      VK2GJB<ZL2TZE<ZL2TZE<ZL2WA<ZL2BAU<ZL3VML
Sent: 001002/0944Z @:ZL3VML.#80.NZL.OC #:42076 [Chch-NZ] FBB7.00g25 $:33748_ZL3
From: ZL3AI@ZL3VML.#80.NZL.OC
To  : APRS@WW


TAPR APRS Special Interest Group Digest for Sunday, October 01, 2000.

1. KPC3+ not updating in GPS mode
2. Re: KPC3+ not updating in GPS mode
3. Re: WinLink 2000 and APRS
4. RE:  Old motherboards for free
5. Re: Page positions?
6. Re: WinLink 2000 and APRS
7. Re: WinLink 2000 and APRS
8. RE: Pharos GPS Rcvr
9. RE:  Old motherboards for free
10. APRS sent via 2way pager
11. Re: WinLink 2000 and APRS
12. RE:  Old motherboards for free
13. APRS Data without GPS or Computer.
14. Re:  KPC3+ not updating in GPS mode
15. RE:  Old motherboards for free
16. ADMIN:  Old motherboards for free
17. APRS Field Aux power source
18. Summary: Drake converter Mod Website
19. Re: APRS Data without GPS or Computer.
20. Master II's for sale
21. Need help getting N6QAB-2 digi on the map
22. (4) KPC-3's for sale
23. Re:  Need help getting N6QAB-2 digi on the map
24. Re: AVRS Test tonight.
25. Re: (4) KPC-3's for sale
26. Re: AVRS Test tonight.
27. Re: Need help getting N6QAB-2 digi on the map
28. RE: Need help getting N6QAB-2 digi on the map
29. ADMIN: Monthly Message

----------------------------------------------------------------------

Subject: KPC3+ not updating in GPS mode
From: Mark Fellhauer <sparkfel@primenet.com>
Date: Sun, 01 Oct 2000 01:31:57 -0500
X-Message-Number: 1



Recently something happened to my KPC3+ so that now when I put in in GPS 
interface mode it no longer updates information in the LT buffers.    If I 
go into Terminal Interface the LT buffers once again start 
updating.     The clock also stops updating from the GPS while in GPS 
mode.    Very Odd.

Below is a printout of my settings.   Any help would be appreciated.

Thanks,

Mark
KC7BXS



cmd:disp
8BITCONV ON
ABAUD    4800
AUTOLF   ON
AX25L2V2 ON
AXDELAY  0
AXHANG   0
BEACON   EVERY 0 (disabled)
BKONDEL  ON
BLT
1 EVERY 00:02:00 CLEAR
2 EVERY 00:04:25 CLEAR
3 EVERY 00:00:00
4 EVERY 00:00:00
BREAK    OFF
BTEXT
BUDLIST  OFF NON
A Link state is: DISCONNECTED
CANLINE  $18 (CTRL-X)
CANPAC   $19 (CTRL-Y)
CD       SOFTWARE
CHECK    0 (disabled)
CMDTIME  1 (1 sec)
CMSG     OFF
COMMAND  $03 (CTRL-C)
CONLIST  OFF NONE
CONMODE  CONVERS
CONOK    ON
CONPERM  OFF
CPACTIME OFF
CR       ON
CRSUP    OFF
CSTAMP   OFF
CTEXT
CTRL     A OFF   B OFF
CWID     EVERY 0 (disabled)
CWIDTEXT DE KC7BXS
DAYTIME  10/01/2000 05:32:09
DAYTWEAK 8
DAYSTR   mm/dd/yyyy hh:mm:ss
DAMA     OFF
DAMACHCK 18 (180 sec)
DBLDISC  OFF
DELETE   $08 (CTRL-H)
DIGIPEAT OFF
DWAIT    0
ECHO
ECHO
ESCAPE   OFF
FLOW     OFF
FILTER   OFF
FRACK    4 (4 sec)
FULLDUP  OFF
GPSHEAD
1 $GPGGA
2 $GPRMC
3
4
GPSINIT
GPSPORT  4800 NORMAL CHECKSUM
GPSTIME  VALID RMC
HBAUD    1200
HEADERLN OFF
HID      ON
HTEXT
INTFACE  TERMINAL
KNTIMER  15 min
LEDS     ON
LCOK     ON
LFADD    OFF
LFSUP    ON
LGETCHAR $05 (CTRL-E)
LLIST    OFF NONE
LT
1 $GPGGA,053209,4332.0371,N,09644.4483...(for some reason these would not 
copy to clipboard)
2 $GPRMC,053209,A,4332.0371.... (for some reason these would not copy to 
clipboard)
LTP
1 APRS VIA RELAY
2 APRS VIA RELAY
3 GPS
4 GPS
LTRACK   0
MONITOR  ON
MALL     ON
MAXFRAME 4
MAXUSERS 10
MBEACON  ON
MCON     OFF
MCOM     OFF
MHEADER  ON
MRESP    OFF
MRPT     ON
MSTAMP   OFF
MXMIT    OFF
MYCALL   KC7BXS-9
MYALIAS  disabled
MYDGPS   disabled
MYDROP   0
MYNODE   KC7BXS-7
MYPBBS   KC7BXS-1
MYREMOTE (deleted by Me)
NDWILD   OFF
NEWMODE  OFF
NOMODE   OFF
NTEXT
NUMNODES 0          PACLEN   0
PACTIME  AFTER 10 (1000 msec)
PASS     $16 (CTRL-V)
PASSALL  OFF
PBBS     100
PBFORWRD NONE  EVERY 0 (disabled)
PBHEADER ON
PBHOLD   ON
PBKILLFW OFF
PBLIST   OFF NONE
PBLO     NEW VARI
PBPERSON OFF
PBREVERS ON
PERSIST  63 (25%)
PID      OFF
PMODE    CMD
PTEXT
REDISPLA $12 (CTRL-R)
RELINK   OFF
RETRY    10
RING     ON
RNRTIME  0 (disabled)
RTEXT
SCREENL  0
SENDPAC  $0D (CTRL-M)
SLOTTIME 240 (2400 msec)
START    $11 (CTRL-Q)
STOP     $13 (CTRL-S)
STREAMSW $7C (|)                STREAMCA OFF
STREAMEV ON
SUPLIST  OFF NONE
SWP      17,17,108
TELEMTRY 0 (disabled)
TRACE    OFF
TRFLOW   OFF
TRIES    10
TXDELAY  60 (600 msec)
TXFLOW   OFF
UNPROTO  APW245 VIA RELAY,WIDE
UIDIGI   OFF NONE
UIDWAIT  OFF
UIFLOOD  disabled,30,NOID
UITRACE  disabled,30
USERS    1
XFLOW    ON
XKCHKSUM OFF
XKPOLLED OFF
XMITLVL  100
XMITOK   ON
XOFF     $13 (CTRL-S)
XON      $11 (CTRL-Q)
cmd: 


----------------------------------------------------------------------

Subject: Re: KPC3+ not updating in GPS mode
From: "Jeff Brenton" <jeffb@espi.com>
Date: Sun, 1 Oct 2000 12:03:11 -0000
X-Message-Number: 2

> when I put it into GPS mode

Question - your settings indicate that you're using the second serial port
(GPSPORT is non-zero), but you mention GPS mode; the two are mutually
exclusive. INT GPS says, "take all GPS information from the 25-pin serial
port". If your GPS is on the radio port, then INT GPS turns it off, at least
for interpretation as GPS information.

Jeff Brenton, Amateur Radio call sign KA9VNV
http://espi.com
Questionable web page: http://dididahdahdidit.com
That strange feeling that you've never
done this before: http://uvajed.espi.com

"Modern Liberalism: The embodiment of an irrational fear of
letting other people run their own lives."



----------------------------------------------------------------------

Subject: Re: WinLink 2000 and APRS
From: Steve Dimse K4HG <k4hg@tapr.org>
Date: Sun, 1 Oct 2000 09:15:09 -0400
X-Message-Number: 3

On 9/30/00 7:20 PM Bob Hart (rahart@hctc.com) wrote:

> While checking my mail today at the K4CJX WinLink 2000 mail box, I noted
>that Steve had a note that APRS would soon be displaying WL2K position
>reports. I am curious as to what I am going to look like on the map since my
>posit on WL2K does not include a symbol. Other than that, kudos to whomever
>coordinated this one. It will make things a bit better for me when I am on
>the road and cannot access APRS. Because of the choice of all the HF bands,
>Winlink is almost always available.
>
I gave them the most common icons, and told them to use the dot if they 
have no way of determining the station type.

Their motivation is to give their users web and graphic capabilities to 
display their positions...presently WinLink only allows email of textual 
reports. map.findu.com makes no use of the icons anyway, so this will 
probably not be adressed. However, if you find it is important to you let 
them know, I imagine it would not be too hard for them to allow the 
choice of an icon in their configuration screen.

I think this linkage is good all around. The two systems are very 
different. I suspect we will see more than a couple WinLink users showing 
up on APRS when they get more exposure to it (and they all have the 
equipment already), the the friends and family of WinLink will certainly 
appreciate the convenience of findu...

Steve K4HG 

----------------------------------------------------------------------

Subject: RE:  Old motherboards for free
From: JBKC8CON@aol.com
Date: Sun, 1 Oct 2000 10:35:10 EDT
X-Message-Number: 4

Hello,

I read the stuff about the old motherboards and computer stuff at a hamfest.
Well, from what I hear from around our area about hamfests with computer 
stuff is
that a lot of hams don't want to see computer stuff at a hamfest.  They came 
to 
see ham radio equipment, radios, test equipment and not computers.  Some hams
feel that the computer is the downfall to amateur radio.  I don't agree with 
that!

Computers are a part of amateur radio.  I have two in my shack.  One I run 
APRS on
and the other I run packet.  I also use them to run PSK31 and other ham radio 
software.

I know if I had been at that hamfest I would of purchased the computer stuff, 



Read previous mail | Read next mail


 17.11.2026 20:39:21lGo back Go up