| |
ZL3AI > APRS 04.10.00 12:06l 207 Lines 7685 Bytes #999 (0) @ WW
BID : 33750_ZL3AI
Read: GUEST
Subj: TAPR Digest, Oct 01, 2/7
Path: DB0MRW<DB0HOT<OK0PKL<OK0PPR<OK0PPL<OK0POK<9A0YRB<HA5OB<HA3PG<WB0TAX<
VK7AX<VK2TGB<VK2IO<VK2GJB<ZL2TZE<ZL2TZE<ZL2WA<ZL2BAU<ZL3VML
Sent: 001002/0947Z @:ZL3VML.#80.NZL.OC #:42077 [Chch-NZ] FBB7.00g25 $:33750_ZL3
From: ZL3AI@ZL3VML.#80.NZL.OC
To : APRS@WW
if I needed anything. And if it was being given away I surely wouldn't of
walked away.
A lot of amateurs just need to realize that the computer is a BIG part of
amateur radio now and that isn't going to change. So when you go to a
hamfest you will see computer stuff setting right on the table with ham radio
equipment.
This is just my two cents worth.
73
Juddie, KC8CON/AAT3EM
----------------------------------------------------------------------
Subject: Re: Page positions?
From: Kd4emi@aol.com
Date: Sun, 1 Oct 2000 10:38:08 EDT
X-Message-Number: 5
In a message dated 9/30/00 10:12:54 PM Eastern Daylight Time,
toms@inconnect.com writes:
> Ipresume these two way pagers can send an email. So, if we had
> APRS@yahoo.com (or something like that). we would need an email like
W7SP-13
> DM40bm as the email. Would that be easy enough for these pagers?
Yes. It is easy to send pages (you can even call a phone wit these). Did you
know there is a system up that lets you send a phone call ? The computer
"reads" the message to the caller in a text to speach way ...
I digress...
Yes the pager can send emails. The originating pager FROM ends up being a
long number. I will send you a "page" so you can see what it looks like.
> I would like to do this, but I have to fix my email system. If anyone has
> the DCC proceedings, I had a paper in there that explains how to add send
> data into the Stream. I have the Perl code to read the emails. Does anyone
> want to have a crack at this? If not, I will try to squeeze it in after
> another email prject is done. It sounds easy enough though.
>
> BTW, are acks required so the pager operator knows the position was sent?
>
The pager will tell you if your sent message was recieved by the pager
company.
If you want a reply that would be ok.
Guys- these things are really incredable. I can send you a message, get a
reply, get movie info, weather flight info, telephone listings, driving
directions and more.
I believe these will replace pagers. You can even run NCIC/FCIC checks on
people. Our county Sheriff's mounted patrol (the horse cops) has them and can
run your name/DL and plate info via pager !
BTW has anyone seen that company that does weather warnings ? There was a
company that did it for free that was on the ARRL page for a while.
If anyone has any questions let me know.
Mike
KD4EMI
----------------------------------------------------------------------
Subject: Re: WinLink 2000 and APRS
From: RMckni8527@aol.com
Date: Sun, 1 Oct 2000 11:28:46 EDT
X-Message-Number: 6
In a message dated 10/1/00 6:21:13 AM Pacific Daylight Time, k4hg@tapr.org
writes:
> I think this linkage is good all around. The two systems are very
> different. I suspect we will see more than a couple WinLink users showing
> up on APRS when they get more exposure to it (and they all have the
> equipment already), the the friends and family of WinLink will certainly
> appreciate the convenience of findu...
I'm sure you are aware of this, but it should be clarified on the SIG.
WinLink uses PACTOR-II, not packet. About the only similarity between them
is that most all PACTOR-II capable modems due include packet modes.
PACTOR-II is far more critical in tuning, significant down to a few Hertz, if
you're off more than about 30 Hz you probably won't link! And older HF rigs
generally won't cut it as they're not stable enough to stay on freq. You
really need a TCXO. I just want to make sure we don't get a barrage of
curious APRS'ers blasting the WinLink freq's with packet signals.
FYI - all of the discussions this SIG has had about signal levels and
decodability, PACTOR-II can successfully decode signals up to -18db BELOW the
noise floor. Quite impressive, and it performs well over long path too. But
don't run out to your local ham dealer to buy a new TNC unless you're REALLY
curious, PACTOR-II modems cost between $650-$800. Don't expect prices to
come down, as the inventor and owner of the protocol isn't licensing it to
other TNC manufacturers. (Dejavu - anyone still sorry they spent $1,200 for
that CLOVER board?)
There are still some WinLink freq's that support regular PACTOR, and most
multifunction TNC's have that mode, but regular PACTOR isn't such a hot
performer, no more exciting than RTTY or HF packet.
Ray - WB3ABN
Kingston, WA
----------------------------------------------------------------------
Subject: Re: WinLink 2000 and APRS
From: Steve Dimse K4HG <k4hg@tapr.org>
Date: Sun, 1 Oct 2000 11:36:04 -0400
X-Message-Number: 7
On 10/1/00 11:28 AM RMckni8527@aol.com (RMckni8527@aol.com) wrote:
>> I think this linkage is good all around. The two systems are very
>> different. I suspect we will see more than a couple WinLink users showing
>> up on APRS when they get more exposure to it (and they all have the
>> equipment already), the the friends and family of WinLink will certainly
>> appreciate the convenience of findu...
>
>I'm sure you are aware of this, but it should be clarified on the SIG.
>WinLink uses PACTOR-II, not packet. About the only similarity between them
>is that most all PACTOR-II capable modems due include packet modes.
Yes, and that is indeed what I meant when I said that WinLink users
already had the equipment for HF APRS...
Steve K4HG
----------------------------------------------------------------------
Subject: RE: Pharos GPS Rcvr
From: "Scott-KC5JGV" <kc5jgv@arrl.net>
Date: Sun, 1 Oct 2000 10:41:54 -0700
X-Message-Number: 8
Good Morning Allan,
I built a tracker using the Tigertronics TM-1+ and the Pharos iGPS-180 GPS.
You know that the GPS is 3.5-5.5 volts. Since the TM-1+ can power the GPS
through the serial port, you have to drop the voltage. I used a 7805 and
built into the DB9 housing. I also cut the keyboard and serial port
connector off of the lead from the GPS and wired it in.
Here is the wiring info you need: ORANGE is Data In, BROWN is Data Out, RED
is Signal Ground, BLACK is + Power (3.3 - 5.5 vdc), YELLOW is - Power.
There ya go! Hope this helps and good luck!
73,
Scott
Need Help with APRS?
http://www.aprshelp.com
Need a 12v computer for APRS?
http://www.compu-comm.com
-----Original Message-----
From: bounce-aprssig-14464@lists.tapr.org
[mailto:bounce-aprssig-14464@lists.tapr.org]On Behalf Of Sadowski, Allan
Sent: Friday, September 29, 2000 12:33 PM
To: TAPR APRS Special Interest Group
Subject: [aprssig] Pharos GPS Rcvr
Does anyone have the PS2 pinout for the Pharos GPS Receiver... and for that
matter... the DB9 pinout... what pins go to what.... I can dig in -
cutting wires - praying... but figure someone else here already has the
info...
TNX
AH6LS
---
You are currently subscribed to aprssig as: kc5jgv@arrl.net
To unsubscribe send a blank email to leave-aprssig-18700I@lists.tapr.org
Questions regarding the SIG go to the SIG administrator: wa1lou@tapr.org
----------------------------------------------------------------------
Subject: RE: Old motherboards for free
From: RMckni8527@aol.com
Date: Sun, 1 Oct 2000 12:10:14 EDT
X-Message-Number: 9
In a message dated 10/1/00 7:44:03 AM Pacific Daylight Time, JBKC8CON@aol.com
writes:
>
> I read the stuff about the old motherboards and computer stuff at a
hamfest.
> Well, from what I hear from around our area about hamfests with computer
> stuff is
> that a lot of hams don't want to see computer stuff at a hamfest. They
came
>
> to
> see ham radio equipment, radios, test equipment and not computers. Some
> hams
> feel that the computer is the downfall to amateur radio. I don't agree
Read previous mail | Read next mail
| |