| |
ZL3AI > APRDIG 21.04.03 09:34l 96 Lines 2909 Bytes #999 (0) @ WW
BID : 1181-ZL3AI
Read: GUEST
Subj: TAPR Digest, Apr 18, 3/3
Path: DB0FHN<DB0RGB<OK0PPL<RZ6HXA<SP7MGD<IW8PGT<ON0AR<VE2PAK<N1UAN<ZL2BAU<
ZL3VML
Sent: 030420/1124Z @:ZL3VML.#80.NZL.OC #:64253 [Chch-NZ] FBB7.00i $:1181-ZL3AI
From: ZL3AI@ZL3VML.#80.NZL.OC
To : APRDIG@WW
Subject: Re: Recommended Standalone TNC for APRS
From: "k7ftp" <k7ftp@commtechreview.net>
Date: Fri, 18 Apr 2003 15:19:50 -0600
X-Message-Number: 16
Thank you for the pointer to the TinyTrak3. I had forgotten about
Byonics. I last saw them at a Hamfest about 2 years ago.
73 to all!
K7FTP Jim
----------------------------------------------------------------------
[commercial content deleted]
----------------------------------------------------------------------
Subject: Re: Recommended Standalone TNC for APRS
From: Miller Scott Contr 30SCS/FTI <Scott.Miller@vandenberg.af.mil>
Date: Fri, 18 Apr 2003 21:36:35 -0000
X-Message-Number: 18
Resistors are cheap, I/O pins less so. I'm really not sure what the state
of the art is these days... never flown a computer myself. I've got a
couple of G38 motors sitting in the garage that are just begging to be put
to good use, though. Too many projects...
----------------------------------------------------------------------
Subject: Davis WWIII
From: "N0POM" <ronc2807@earthlink.net>
Date: Fri, 18 Apr 2003 20:25:51
X-Message-Number: 19
Hi All,
I am new to the list, and just getting started in APRS. I have a Davis
WWIII that I wan to use with APRS+. Does anyone else have a Davis and can
tell me how the serial end of the cable should be wired? I have found info
on the Peet but not Davis. Are they possibly the same? Thanks for any help.
N0POM
----------------------------------------------------------------------
Subject: Re: Recommended Standalone TNC for APRS
From: Jeff King <jeff@aerodata.net>
Date: Fri, 18 Apr 2003 21:47:57 -0400
X-Message-Number: 20
On Fri, 18 Apr 2003 20:49:05 -0000, Miller Scott Contr 30SCS/FTI wrote:
>On a related subject, has anyone built a packet demodulator using an NJM2211
>decoder?
I built a numerous TNC1's and TNC2's, and all of them had 2211's in them. The
current MFJ's (or as of a few years ago) 1270's had 2211's in them as well.
They are one of the best bell 202 demodulators on the market.... old, have to
use pots, but work the best. The energy detect is second to none.
Down side, you have to set the tuning of them.
At one point, the ham hud boys where looking at putting one on the ham hud
board.
Regards,
Jeff
----------------------------------------------------------------------
Subject: Multiple Sound Cards
From: Dave Kaplan <dkaplan@steffeninc.com>
Date: Fri, 18 Apr 2003 20:59:37 -0500
X-Message-Number: 21
Trying to install a 2nd sound card in a computer that already has a built
in sound card. I'm having a problem since the second card (SoundBlaster)
wants address 220 but the built in card already is using that address.
I know I've see people using multiple sound cards for TNC applications. Is
there a secret (Using XP Professional) to installing 2 sound cards in a
machine?
WB0WNX
Dave
---
END OF DIGEST
Read previous mail | Read next mail
| |
