| |
ZL3AI > APRDIG 03.04.03 11:58l 107 Lines 3401 Bytes #999 (0) @ WW
BID : 1098-ZL3AI
Read: GUEST
Subj: TAPR Digest, Mar 28, 4/4
Path: DB0FHN<DB0RGB<OK0PPL<RZ6HXA<SP7MGD<IK6PYS<ON0AR<N2BQF<VK3TE<ZL2BAU<
ZL3VML
Sent: 030402/0953Z @:ZL3VML.#80.NZL.OC #:63106 [Chch-NZ] FBB7.00i $:1098-ZL3AI
From: ZL3AI@ZL3VML.#80.NZL.OC
To : APRDIG@WW
Subject: Re: APRS development?
From: "Mark Fellhauer" <sparkfel@qwest.net>
Date: Fri, 28 Mar 2003 18:39:25 -0600
X-Message-Number: 26
At 07:40 AM 3/27/2003, Earl S. Garber wrote:
>Things I'd want in a new version of WinAPRS:
I'd like to see someone add support for plotting ACARS tracks. One
wouldn't even have to design a decoder, just provide a DDE link to a
current decoder.
And no, I'm not proposing to allowing ACARS info to be gated to the
Internet... Local plotting would be fine.
BTW, I've noticed a lot of ACARS traffic has migrated to 136.800 MHz over
the midwest. I'm hearing 10 to 40 packet burst per minute on that frequency.
73,
Mark
KC7BXS
----------------------------------------------------------------------
Subject: RE: APRS Emergency packet e-mail
From: "Peter \"Dakota\" Summerhawk" <wymarine@toughguy.net>
Date: Fri, 28 Mar 2003 17:52:06 -0700
X-Message-Number: 27
Was looking at the site, What form does the position have to be in?
is it just like you have to put it in to WINAPRS? N 41.07.48 / W 104...
That sort of thing? Sorry if I am not understanding right, still trying to
get over work. Would like to get this set up as I can have it sent to my
cell or two-way pager for the area.
Thanks
Peter N0WRE
----------------------------------------------------------------------
Subject: Re: APRS development?
From: Jim Duncan <jdbandman@earthlink.net>
Date: Fri, 28 Mar 2003 19:21:02 -0600
X-Message-Number: 28
It occurs to me that we seem to go through this same debate every year
about this time. Hasn't anyone ever noticed that there are ALWAYS major
APRS releases in conjunction with Dayton?
--
73 de Jim, KU0G
Chairman/Coordinator
Kansas City APRS Working Group, W0APR
First Alert Storm Team KMBC-TV9
Mailto:ku0g@kcaprs.org
Webpage: http://www.kcaprs.org
----------------------------------------------------------------------
Subject: KISS Setup
From: "Robert Michaud" <michaud@ispwest.com>
Date: Fri, 28 Mar 2003 19:35:36 -0800
X-Message-Number: 29
Group,
I have been using the TH-D7 quite sucessfully with UI-View32. However, I am
confused on how to setup a KISS TNC with UI-View32. In the Comms Setup menu
under TNC Type menu there is no KISSON selection. I assume there should be
one since there is a KISSOFF. Also in the Help section on KISS Setup there
is reference to a file named KISSPRM1.CMD but it is not anywhere on my
computer. Am I required to develope it myself? If so what are suggested
parameters?
Robert, KD6INI
----------------------------------------------------------------------
Subject: RE: KISS Setup
From: "Ramon F. Kolb" <ramon@ieee.org>
Date: Fri, 28 Mar 2003 23:18:46 -0500
X-Message-Number: 30
Hi Robert,
I think you'd get a better response if you would post your question to
ui-view@yahoogroups.com. In the mean time, I think it would also be
easier to help you if you could indicate WHAT TNC you're looking to put
in KISS mode... Generally, you select your TNC type in the Setup->Comms
Setup menu, and then select KISS in the "Host Mode" pull-down menu on
the same page. If you need more help, press F1 while in that menu.
I have a KPC3+, and there are no problems getting this one to work in
KISS...
--Ramon
Ramon F. Kolb, KX1T, PA3EUG, Boston, MA, USA [FN42KI]
ICQ:77117744; MSNMGR:legalalien30@hotmail.com
http://kx1t.webhop.org
---
END OF DIGEST
Read previous mail | Read next mail
| |
