OpenBCM V1.13 (Linux)

Packet Radio Mailbox

DB0FHN

[JN59NK Nuernberg]

 Login: GUEST





  
ZL3AI  > APRS     01.10.00 10:48l 217 Lines 7018 Bytes #999 (0) @ WW
BID : 33703_ZL3AI
Read: GUEST
Subj: TAPR Digest, Sep 28, 1/4
Path: DB0MRW<OK0PKL<OK0PPR<OK0PPL<OK0POK<9A0YRB<HA5OB<HA3PG<VE1DRG<7M3TJZ<
      KF9UG<N8ZFM<ZL2TZE<ZL2TZE<ZL2WA<ZL2BAU<ZL3VML
Sent: 000929/1029Z @:ZL3VML.#80.NZL.OC #:41787 [Chch-NZ] FBB7.00g25 $:33703_ZL3
From: ZL3AI@ZL3VML.#80.NZL.OC
To  : APRS@WW


TAPR APRS Special Interest Group Digest for Thursday, September 28, 2000.

1. Antenna Safety
2. Low Cost Radios
3. 2 way paging and aprs
4. Re: APRS Remote Control!
5. FRS MOD ?
6. Re: 2 way paging and aprs
7. Re: APRS Remote Control!
8. Re: APRS Remote Control!
9. Re: APRS Remote Control!
10. Just a thought....
11. Garmin's reply to the input problem on Streetpilot
12. Re: APRS Remote Control!
13. MURS a Lesson Learned?
14. RE: Just a thought....
15. Is there a lesson here for us?
16. Re: APRS Remote Control!
17. Lyris won't let HamHUD in...
18. RE: Low Cost Radios
19. HamHuds and UHF and MCX-100's oh my!
20. RE: Just a thought....
21. SUNSAT APRS Schedule
22. Re: aprssig digest: September 27, 2000

----------------------------------------------------------------------

Subject: Antenna Safety
From: Mark Fellhauer <sparkfel@primenet.com>
Date: Thu, 28 Sep 2000 01:53:31 -0500
X-Message-Number: 1


I was considering doing a presentation on Antenna Safety for the local 
ARC.   Does anyone have (or can point me to) a high-quality AVI or MPEG of 

the KABC ENG van cranking its mast into the powerlines (last May) (as 
filmed by KRCA).   All I can find on the web are low res Real Media clips.

http://www.channel2000.com/news/stories/news-20000522-170224.html

I know it's morbid, but it's a pretty good demonstration of what happens 
when an antenna touches a powerline.

This is not an uncommon occurance (I know as my brother worked for 
ROSCOR).   Just a few days after the KABC people were injured, a Cedar 
Rapids, IA  KGAN photographer, Peter MacNaughton, was seriously burned when 
he cranked his antenna into a 115 k-volt powerline.

And they continue to make ENG vans where one can deploy the telescoping 
mast from inside the vehicle and drive away with it extended...


73,

Mark
KC7BXS



----------------------------------------------------------------------

Subject: Low Cost Radios
From: Mark Fellhauer <sparkfel@primenet.com>
Date: Thu, 28 Sep 2000 02:38:43 -0500
X-Message-Number: 2


Not too long ago I touted the excellent value the 200 series Kenwood radios 
are for APRS/PACKET.

Here's and example pulled from the News Groups today:

------------------------------------
For Sale:  Kenwood TM-241A 2 Meter Mobile Radio
            Excellent Conditions, works well,
            Includes stock microphone.
            Price: $90.00 + $5.00 shipping

Prepayment via postal Money Order preferred, will ship
item the same day I receive M.O., and email you confirmation
and a Delivery Confirmation Number.

Email me if interested:  bcsw@home.com

Todd A. Atkins, K4MSW
Baton Rouge, Louisiana
-------------------------------------

I don't know Mr. Atkins.  But 90 bucks is a pretty good price for this 
rig.   Too bad I can't afford it right now.

73,

Mark
KC7BXS


----------------------------------------------------------------------

Subject: 2 way paging and aprs
From: Kd4emi@aol.com
Date: Thu, 28 Sep 2000 06:07:07 EDT
X-Message-Number: 3

I had this idea last night see what you guys think.

I just got a two way pager. This nationwide device allows me to send email 
into the
internet as one of its' features.
Here is the idea.

Lets say my 2meter radio is down, but I want to send my position.
With my GPS and pager , I can INSERT MY POSITION into the APRS system
by sending a message to an internet address with my posit manually typed.

By doing this I can still play APRS (in a sense) - but at least I can now 
send my position into the aprsnet stream.  As long I respect the posit 
syntax- I am now in and can be tracked through Steve's system as well as 
local networks.

Can we do this ?
Mike KD4EMI@AOL.COM

----------------------------------------------------------------------

Subject: Re: APRS Remote Control!
From: K3for@aol.com
Date: Thu, 28 Sep 2000 08:33:48 EDT
X-Message-Number: 4

Great idea, Bob!  I've been doing parallel port remote-control programming for
years in C, for my model railroad layout.  Take 
apart the IR tx/rx pieces in computer mice, put them across the track for basic
train locators, then the computer energizes/de-
energizes parts of the track based on logic to prevent train collisions.  Never
thought about APRS application.

As we all know, X-10 was one of the early folks doing home automation by
wireless or powerline carrier, etc.  They're still aro
und, and Radio Shack still sells some of the gear.  

In fact, (and I'm not an employee) x10.com is offering some pretty interesting
deals right now.  For $40 ($70 with a $30 credit
 toward next purchase), I purchased a 2.4 Ghz tx/rx set (4 selectable channels)
that takes composite video and stereo audio out
 of a device like your computer DVD player and RF's it a couple hundred feet up
to your home entertainment center.  But WAIT!  
They also include a UNIVERSAL remote that also operates your COMPUTER by RF
remote from your living room (little receiver attac
hes to your com port and Win9x/NT software downloaded for free), including
support for DVD, CD, and MP3 software players.  A si
milar device WITHOUT the PC remote control, sells at Radio Shack for $100.

Thought there would be a catch, but I've had it on for 96 straight hours with
no detectable extraneous RF in the shack or probl
ems.  Video is NOT S-video, but is better than VCR quality.  From 2 houses down
at my neighbor's place, I was able to pipe DVD 
from my laptop, and a pay-per-view from my friend's cable-box, to my own living
room!

Email direct for any questions.

Skip/K3FOR
Annapolis

----------------------------------------------------------------------

Subject: FRS MOD ?
From: "Denis G. Barton" <wb8skp@upmail.com>
Date: Thu, 28 Sep 2000 08:25:39 -0400
X-Message-Number: 5


With all this talk about usind the FRS Radios, has anyone tryed to move them
down
to our 440MHz band?

Denis  WB8SKP


----------------------------------------------------------------------

Subject: Re: 2 way paging and aprs
From: Steve Dimse K4HG <k4hg@tapr.org>
Date: Thu, 28 Sep 2000 10:38:50 -0400
X-Message-Number: 6

On 9/28/00 6:07 AM Kd4emi@aol.com (Kd4emi@aol.com) wrote:

>Lets say my 2meter radio is down, but I want to send my position.
>With my GPS and pager , I can INSERT MY POSITION into the APRS system
>by sending a message to an internet address with my posit manually typed.
>
>By doing this I can still play APRS (in a sense) - but at least I can now 
>send my position into the aprsnet stream.  As long I respect the posit 
>syntax- I am now in and can be tracked through Steve's system as well as 
>local networks.
>
>Can we do this ?

Timing is everything...

Last night we got working a link between the WinLink Amateur network and 
the APRS internet system. They routinely send lat/lon data, but can only 
display it textually, so the linkage was a natural for them...BTW 
inspired by the intrepid W7LUS, who is preparing his boat for some pretty 
amazing cruising...

I'll have to double check, but I'm pretty sure this will work from both 




Read previous mail | Read next mail


 17.11.2026 22:13:04lGo back Go up