| |
ZL3AI > APRDIG 15.02.03 11:01l 210 Lines 9035 Bytes #999 (0) @ WW
BID : 896-ZL3AI
Read: GUEST
Subj: TAPR Digest, Feb 12, 2/2
Path: DB0FHN<DB0ZWI<DB0HST<HB9OK<IR0NET<ED1ZAC<LU6DTS<N1UAN<ZL2BAU<ZL3VML
Sent: 030214/0927Z @:ZL3VML.#80.NZL.OC #:59456 [Chch-NZ] FBB7.00i $:896-ZL3AI
From: ZL3AI@ZL3VML.#80.NZL.OC
To : APRDIG@WW
Subject: Mailing list for new spec development
From: Miller Scott Contr 30SCS/FTI <Scott.Miller@vandenberg.af.mil>
Date: Wed, 12 Feb 2003 20:29:02 -0000
X-Message-Number: 11
I've created a new mailing list dedicated to discussion and development of
the new (as yet unnamed) binary protocol. To subscribe, send a message to
lists@n1vg.net with the subject line 'subscribe spec'.
I've had lots of good feedback on the APRS SIGs about this project, but I
don't want to clutter up the lists with lots of technical discussions that
aren't strictly about APRS. I'd like to encourage anyone who's interested
in contributing to the protocol, or who just wants to lurk and see what's
going on, to join the list.]
For anyone who's missed the previous discussions about the proposed
protocol, I'll be setting up a website soon with a summary of the project's
goals, as well as the current version of the spec.
Scott / N1VG
----------------------------------------------------------------------
Subject: RE: MS Internet Exploreer
From: "tvsjr@sprynet.com" <tvsjr@sprynet.com>
Date: Wed, 12 Feb 2003 16:25:07 -0600 (CST)
X-Message-Number: 12
If all things work as they should, at a table level, align="left" will
force the entire table left. The easy way to fix it is either add
align="left" at the TD level or use Cascading Style Sheets (which would
save the additional overhead of align="left" for every TD...) - however,
that brings up new compatibility issues.
Alignment is a very sticky subject for cross-browser compatibility. YMMV.
Terry
----------------------------------------------------------------------
Subject: Re: DX display on Kenwood d700a
From: Henk de Groot <henk.de.groot@hetnet.nl>
Date: Wed, 12 Feb 2003 23:21:06 +0100
X-Message-Number: 13
Hello Mike,
At 13:02 11-2-03 +0000, Mike Wolthuis wrote:
>What I saw was on my d700a a DX position for myself, while this was not a
>big deal it was saying that I was DX from the digipeater. It appeared the
>software being run was DigiNed.
>
>I think this would be a cool feature if an out of towner were in town and
>it showed me on my d700a a DX note letting me know that someone was
>visiting so I could message and say hi.
>
>I am not sure exactly what the DX posits were telling me, was I DX as a
>station from the states or was I DX to the digipeater hearing me?
Well, its just what it is... DX... DIGI_NED looks at the incomming packets
if they are received directly. If it is, then the distance is calculated
from the digipeater (it recognizes normal plain APRS, compressed APRS,
MIC-E and some GPS strings). When your station is at the largest distance
from the digipeater in the last hour (or what ever it was configured for)
it sends a DX report in the coverage area of the digipeater.
There is a threshold to avoid silly short distances but that limit is set
by whoever operates the digi. There is also a maximum distance to weed out
unrealistic long distances, of course also configurable by the operator.
So you got a DX message because the digi received you directly and you were
the most distant station in the last hour. Because you were received
directly, you were also added to the digi's heard list.
When the conditions get better you should be able to see the distance in
the DX messages go up.
But this is not all. You can send the query "?DX 1" to get a reply with the
DX stations heard on the digi's first port. With the default configuration
it gives you the best DX in the last hour, the best DX in the last 24 hours
and the best DX from all the stations in the heard list (which depends on
the size of the heard list). The default configuration is conservative
about the size, but 500 stations will fit, that's what we use in PI1APK
(and it is full!).
You can request your own distance and bearing from the digipeater by
sending for example "?DX PE1DNN-9", for me this responds with the distance
and bearing from the digipeater to PE1DNN-9.
You can list the last 40 stations the digi heard direct on port 1 by
sending "?MH 1" to the digi (or "?MH 2" for the second port, or "?MH 0" for
all ports. It will send 10 lines with 4 stations each, just enough to fill
the TH-D7 message buffers without overloading it.
When you got the best DX from the whole list (and second-best too), you may
want to know when it was received. Well, you can use "?MH PE1DNN" for
example to get feedback when PE1DNN was last heard and on which port.
Finally if you want to know how many stations are in the heard list and
what is the oldest entry, you can send "?MH STAT". Note that when a station
is received again, the old entry for the station is removed, so the age of
the oldest entry is most likely newer than the date the digi was booted
last time (you can retrieve that by sending "?UP").
You do not need to remember this all. When you just a query with rubbish,
the digi will suggest you to send the request "?help". Form there it should
lead you through the options. Some queries like "?MH" and "?DX" are build
into the system, but the user can add new messages to guide you to the
nearest voice repeater or to post objects with points of interest, like
where the local HAM store is or where to find the police station.
UIview has something comparible but doesn't send its DX in DX format to
show up on a TH-D7 or TM-D700, at least not the message I've seen. Most
UIview stations will not be up day and night for a full year to collect
data over that period, so retrieving the best DX in the last half year will
be hard...
I just send some of these queries to PI1APK, you can look at Findu how it
looks like (if it made it to an IGATE that is...).
I hope this answers your question. Kind regards,
Henk.
----------------------------------------------------------------------
Subject: [Fwd: Further statement on BeacoNet]
From: "Ev Tupis (W2EV)" <w2ev@arrl.net>
Date: Wed, 12 Feb 2003 19:06:59 -0500
X-Message-Number: 14
I thought this may be of interest to those who felt the frustrations of Dan's
original note banning the use of BEACONet's CU2QSO system in support of VHF
Contests. I'm now a fan of the "instant replay" rule. :o)
Ev, W2EV
btw...more information on this system (including FAQ's) is found at
http://www.BEACONet.org | CU2QSO
-------- Original Message --------
Subject: Further statement on BeacoNet
Date: Tue, 11 Feb 2003 08:48:45 -0500
From: "Henderson, Dan N1ND" <dhenderson@arrl.org>
To: cq-contest <cq-contest@contesting.com>,"VHF Contesting.com"
<vhfcontesting@contesting.com>,VHF List <vhf@w6yx.stanford.edu>
CC: rvhfg_general@yahoogroups.com, packrats@mailman.qth.net
Please forward to any reflector as you deem appropriate:
After additional review and conversation The ARRL has come to believe that
BEACONet is similar to an automated CQing system. It facilitates the
solicitation of contacts. It uses a band that is usable in the particular
contest, and QSOs are made on such radios. It uses a mode that is
acceptable for contacts in the particular contest. BEACONet seems to comply
with the letter and spirit of the contest rules. Although this might be a
"new" concept in V/UHF contesting, it doesn't seem contrary to the rules.
In view of this interpretation, it appears to that BEACONet does not
violate any contest rules, and therefore the use of BEACONet is
permissible.
If you have questions regarding this rules interpretation, please contact
me at n1nd@arrl.org
Thanks and 73
Dan Henderson, N1ND
ARRL Contest Branch Manager
----------------------------------------------------------------------
Subject: Connecting to APRS-IS - Programming Question
From: "Michael Francoeur" <mfranc@prexar.com>
Date: Wed, 12 Feb 2003 19:28:24 -0500
X-Message-Number: 15
FYI, I'm interested in opening a tcp/ip connection to monitor the APRS-IS
traffic. I can open a tcp/ip connection, but my question is what comes
next? I've managed a simple connect but find no data when attempting to
read from the connection?
If this has been done using Oracle, I'd like to know about it. If not, I'm
using their utl_tcp package for the tcp/ip functions. Any and all
programming examples are welcome, I'm fluent in several languages.
- Mike/N1NAF
----------------------------------------------------------------------
Subject: RE: MS Internet Exploreer
From: "Brian Riley (maillist)" <n1bq_list@wulfden.org>
Date: Wed, 12 Feb 2003 19:42:56 -0500
X-Message-Number: 16
On Mac OSX under Safari (Apple Web Browser 1.0 beta (build 60)) it formats
and aligns correctly, and under MS IE 5.2 (they still didn't release 6 yet!)
it also formats correctly.
I have recently begun running my webpages through some tight syntax checking
and that old "<center>" tag has been getting replaced all over the place. I
had made liberal use of it and found it often caused more trouble than it
was worth. Scot is right the "align" attribute in the <TABLE>, <TR>, and
<TD> tags is the better way to go.
---
END OF DIGEST
Read previous mail | Read next mail
| |