OpenBCM V1.13 (Linux)

Packet Radio Mailbox

DB0FHN

[JN59NK Nuernberg]

 Login: GUEST





  
ZL3AI  > APRDIG   07.02.03 11:53l 268 Lines 9483 Bytes #999 (0) @ WW
BID : 855-ZL3AI
Read: GUEST
Subj: TAPR Digest, Feb 03, 5/6
Path: DB0FHN<DB0RGB<DB0SL<DB0FSG<DB0GAP<DB0GPP<DB0LX<DB0CZ<DB0GE<LX0PAC<
      LX0HST<HA3PG<HB9OK<IR0NET<VK3TE<ZL2BAU<ZL3VML
Sent: 030205/0855Z @:ZL3VML.#80.NZL.OC #:58836 [Chch-NZ] FBB7.00i $:855-ZL3AI
From: ZL3AI@ZL3VML.#80.NZL.OC
To  : APRDIG@WW

Subject: KPC3 Setup
<LYR28261-118674-2003.02.03-17.26.49--millardj#earthlink.net@lists.tapr.org>
From: Jay Millard <millardj@earthlink.net>
Date: Mon, 03 Feb 2003 17:50:40 -0500
X-Message-Number: 24

A friend is configuring KPC3, not a "+" to be used as a digi.  Anyone with
experience please contact off list.  Thanks and 73's

Jay 
KD1LY

----------------------------------------------------------------------

Subject: RE: Capabilities announcement
From: Miller Scott Contr 30SCS/FTI <Scott.Miller@vandenberg.af.mil>
Date: Mon, 3 Feb 2003 23:54:51 -0000
X-Message-Number: 25

I've made some progress on this and still need some input.  Currently,
frequency handles 0 Hz to 40+ GHz in 10 hz steps.  Any need for more range
or resolution?  I'm still thinking about bandwidth - it needs to handle
everything from CW up through at least NTSC TV.  I can fit a 0 Hz to 24 MHz
range into 24 bits with 1 Hz resolution.  Can anyone think of a current or
proposed mode that's more than 24 MHz wide, or a satellite bandpass
transponder that's wider than that?

For CTCSS tones, does anyone use anything outside the 44 EIA standard tones?

Here's what I've got now, currently occupying 11 bytes:

MSG #0F - Radio Capabilities -- In work

[Frequency] 32 bits
[Modulation] 5 bits
[Signal] 3 bits
[Information] 4 bits
[Detail] 4 bits
[Multiplex] 3 bits
[Function] 3 bits
[Bandwidth]
[CTCSS] 6 bits
<repeated 0 or more times>

This message is used to announce the radio communication capabilities of the
station.  The frequency represents the center frequency in 10 Hz increments,
allowing indication of frequencies from 0 hz to over 40 GHz.

Modulation, Signal, Information, Detail, and Multiplex fields are based on
the WARC-79 emission designators.  Values are translated as follows:

Modulation: A-Z -> 0-25
Signal: 0, 1, 2, 3, 7, 8, 9, X -> 0-7
Information: N, A, B, C, D, E, F, W, X -> 0-8
Detail: A-H, J-N, W, X -> 0-14
Multiplex: N, C, F, T, W, X -> 0-5

Defined Functions:

00 - Simplex
01 - Uplink / Input
02 - Downlink / Output
03 - Beacon / Broadcast

The CTCSS field, if 0, indicates that CTCSS is not used on this frequency.
Values 1 through 44 correspond to the EIA standard CTCSS frequencies in
ascending order, from 67.0 to 254.1 Hz.

----------------------------------------------------------------------

Subject: Re: Xastir Up and Running ... Sort of
From: David L Norris <kg9ae@webaugur.com>
Date: 03 Feb 2003 19:05:59 -0500
X-Message-Number: 26

On Mon, 2003-02-03 at 17:38, Brian Riley (maillist) wrote:
>Xastir comes up and runs. I configured it to my local numbers, BUT, where do
>the maps go? I found a map folder in "/sw/xastir" but I cannot copy anything
>to there. I have a bunch of Win/MacAPRS maps to put in there, so where do
>they go/ Do I just change permissions/ Or is there something else?

/sw/xastir/maps is where they should go.  I'm not particularly familiar
with MacOS X.  But, yes, you should be able to simply change
permissions.  If you trust all the users of your machine with your maps
you could make the maps directory group writable (and I'd also make it
Set-GID).  Here's how you might do it from a terminal:
  1. open a terminal app
  2. sudo chgrp -R users /sw/xastir/maps
  3. sudo find /sw/xastir/maps -type d -exec chmod g+rwxs {} \;

Now, in theory, all normal users can place maps into /sw/xastir/maps
directory.  I'm sure there's probably some GUI way of doing all that but
I'm not familiar with MacOSX's GUI.

> I tried to configure an interface for the internet but every server I tried
>seem to get an error (I had an active net connection at the time) xastir
>looks pretty good but the help files are a little Spartan.

Hopefully someone can help with that.

-- 
 David Norris
  Dave's Web - http://www.webaugur.com/dave/
  Augury Net - http://home.webaugur.com/
  ICQ - 412039

----------------------------------------------------------------------

Subject: RE: Capabilities announcement
From: Rich Osman <Rich@osman.com>
Date: Mon, 03 Feb 2003 18:31:17 -0600
X-Message-Number: 27

Miller Scott Contr 30SCS/FTI wrote:

>I've made some progress on this and still need some input.  Currently,
>frequency handles 0 Hz to 40+ GHz in 10 hz steps.  Any need for more range
>or resolution?  I'm still thinking about bandwidth - it needs to handle
>everything from CW up through at least NTSC TV.  I can fit a 0 Hz to 24 MHz

There are several NTSC variants, and Europe uses PAL, SECAM, and Digital 
TV In several variants. I understand that some Dutch hams are already 
running DTV on the ham bands.

>range into 24 bits with 1 Hz resolution.  Can anyone think of a current or
>proposed mode that's more than 24 MHz wide, or a satellite bandpass
>transponder that's wider than that?

Plan for it if you want this to last more than 5 years.

>For CTCSS tones, does anyone use anything outside the 44 EIA standard tones?

You might as well plan for DCSS (aka DCS, DPL) as well. It used, though 
not widely.  

>Here's what I've got now, currently occupying 11 bytes:
>
>MSG #0F - Radio Capabilities -- In work
>
>[Frequency] 32 bits
>[Modulation] 5 bits
>[Signal] 3 bits
>[Information] 4 bits
>[Detail] 4 bits
>[Multiplex] 3 bits
>[Function] 3 bits
>[Bandwidth]
>[CTCSS] 6 bits
><repeated 0 or more times>
>
>This message is used to announce the radio communication capabilities of the
>station.  The frequency represents the center frequency in 10 Hz increments,
>allowing indication of frequencies from 0 hz to over 40 GHz.
>
>Modulation, Signal, Information, Detail, and Multiplex fields are based on
>the WARC-79 emission designators.  Values are translated as follows:
>
>Modulation: A-Z -> 0-25
>Signal: 0, 1, 2, 3, 7, 8, 9, X -> 0-7
>Information: N, A, B, C, D, E, F, W, X -> 0-8
>Detail: A-H, J-N, W, X -> 0-14
>Multiplex: N, C, F, T, W, X -> 0-5

It might be wise to have a leading flag bit that makes this table 
driven, or selects the full descriptor.  99-44/100 % of all cases will 
probably fall into a couple of dozen basic categories.

>Defined Functions:
>
>00 - Simplex
>01 - Uplink / Input
>02 - Downlink / Output
>03 - Beacon / Broadcast

You might want to consider things like time-division duplex, or 
half/full duplex distinctions.here, too.  

>The CTCSS field, if 0, indicates that CTCSS is not used on this frequency.
>Values 1 through 44 correspond to the EIA standard CTCSS frequencies in
>ascending order, from 67.0 to 254.1 Hz.

I think two more bits will let you accomdate all the EIA DCS codes. 
 I'll have to dig for this.

Somerthing describing agility might be useful; Upper freq/lower 
freq/tuning step etc.  

-- 
mailto:Rich@Osman.com  http://www.rich.osman.com
Rich Osman;  POB 93167; Southlake, TX 76092 (Near DFW Airport) ARS: N1OZ

If you receive something that says "Send this to everyone you know,"
      PLEASE pretend you don't know me.

----------------------------------------------------------------------

Subject: RE: Capabilities announcement
From: "Ronald Reams" <wa4mjf@worldnet.att.net>
Date: Mon, 3 Feb 2003 19:34:21 -0500
X-Message-Number: 28

MILSTD is 150 kc CTCSS (New Squelch).  It may have been picked before there
were EIA standars.

73 de Ronnie

----------------------------------------------------------------------

Subject: Re: Capabilities announcement
From: WA8LMF2@aol.com
Date: Mon, 3 Feb 2003 20:04:59 EST
X-Message-Number: 29

In a message dated 2/3/2003 3:56:29 PM Pacific Standard Time, 
Scott.Miller@vandenberg.af.mil writes:

>For CTCSS tones, does anyone use anything outside the 44 EIA standard tones?

Some radios including my Yaesu FT-1500M have 50 PL tone choices.  Since 
"brick wall" digital filters have replaced traditional analog ones, many
mfrs have been shoehorning additional tone freqs in between the traditional
EIA ones.

I suspect you will have to actually code the digits of the tone freq rather 
than use some sort of shorthand token since mfrs label the tone freqs with 
inconsistent codes and some don't support the additional [beyond EIA]
tones. [ You would need the equivalent of four decimal digits -- from
approx 50.0 Hz to 250.0 Hz.  I suppose you could keep it wholly integers
and do 500 to 2500. ]

Also

What about DCS [ Digital Coded Squelch ] a.k.a. "DPL" -- [ Digital PL ]?  
Most current analog commercial radios, and an increasing number of ham 
VHF/UHF rigs support it.    There are about 100 codes possible in this 
signalling scheme that uses low frequency square waves [pulses actually] 
instead of the constant LF sine wave of traditional CTCSS.  

Stephen H. Smith                   wa8lmf @ aol.com 
Home Page:                                         http://wa8lmf.com
Ham Radio/Mobile SSTV page:     http://members.aol.com/wa8lmf/ham
APRS Stuff                                              
http://members.aol.com/wa8lmf/aprs

----------------------------------------------------------------------

Subject: Re: [ Rich Osman ] RE: Capabilities announcement
From: "Gregg G. Wonderly" <gregg@skymaster.cytetech.com>
Date: Mon, 03 Feb 2003 21:36:30 -0600
X-Message-Number: 30

>>range into 24 bits with 1 Hz resolution.  Can anyone think of a current or
>>proposed mode that's more than 24 MHz wide, or a satellite bandpass
>>transponder that's wider than that?
>>
>Plan for it if you want this to last more than 5 years.

UWB right?  Ultra Wide Band...

-----
gregg@cytetech.com  (Cyte Technologies Inc)

----------------------------------------------------------------------



Read previous mail | Read next mail


 16.11.2026 05:32:32lGo back Go up